BNVLP - TIONA 464

  • MSDS: BNVLP
  • Manufacturer: SCM CHEMICALS
  • Product Name: TIONA 464
  • National Stock Number: 8010-00N031240
Product Identification

Product ID:TIONA 464
MSDS Date:08/01/1987
FSC:8010
NIIN:00N031240
MSDS Number: BNVLP

Responsible Party
SCM CHEMICALS
7 ST PAUL STREET
BALTIMORE, MD 21202
US

Emergency Phone: 301-783-1120

Info Phone: 301-783-1120;301-355-3600

Preparer: J. H. BLACKER

Cage: 46343

Contractor
SCM CHEMICALS
BALTIMORE, MD 21202 US

Telephone: 301-783-1120;301-931-4570

Cage: 46343

Ingredients

RUTILE; (TITANIUM DIOXIDE)

CAS: 1317-80-2

RTECS: VM2940000

Fraction By Weight: 80-97%

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


SILICON DIOXIDE, AMORPHOUS; (AMORPHOUS SILICA)

CAS: 7631-86-9

Fraction By Weight: 10% MAX

OSHA PEL 6 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


ALUMINUM OXIDE; (ALUMINUM OXIDES (AS AL*2O*3)) (EPA LISTS

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: 6% MAX

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Hazards

LD50 LC50 Mixture:LD50: (ORAL,RAT) >9000 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: INERT NUISANCE DUST. TEMPORARY
DRYING EFFECT OR IRRITATION OF MUCOUS MEMRANES MAY RESULT FROM
EXCESSIVE EXPOSURE. SKIN:NON CORROSIVE; NON-IRRITATING;
NON-SENSITIZING; MAY HAVE A DRYING EFFECT O N THE SKIN. EYE: INERT
FOREIGN BODY HAZARD ONLY. INGEST: HARMLESS, PHYSIOLOGICALLY INERT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MIN. SKIN:
WASH WITH WATER AND MILD SOAP. INHAL: REMOVE TO FRESH AIR. INGEST:
NO TREATMENT REQUIRED. MATERIAL IS COMPLETELTY ELIMINATED THROUGH
GI TRACT IN ABOUT 24 HOURS.

Fire Fighting

Flash Point:NON-FLAMMABLE
Extinguishing Media:NO FIRE HAZARD. USE MEDIA SUITABLE FOR SURROUNDING
FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:USE ANY FEASIBLE MECHANICAL MEANS- BROOM,
BRUSH, SCOOP, VACUUM, OR WET ABSORBENT MATERIAL BUT AVOID DUSTING
DURING CLEAN-UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED DUST RESPIRATOR IF TLV IS OR
MAY BE EXCEEDED.
Ventilation:LOCAL EXHAUST, IF REQUIRED TO MAINTAIN AIRBORNE
CONCENTRATION BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH: 5.5 TO 8.5 (10% SLURRY). WASTE DISP METH: ACT OF 1986, TITLE III,
SECTIONS 313. REVIEW APPROPRIATENESS OF THIS REGULATION PERTAINING
TO YOUR USAGE.

Chemical Properties

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:3326F,1830C
Spec Gravity:3.7-4.2(H2O=1)
pH:SUPDAT
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE, TASTELESS, ODORLESS POWDER.

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:PROD WHEN SPILLED CAN BE DISP OF INTO SANITARY
LANDFILL/INDUSTRIAL WASTE DISP LANDFILL I/A/W FED, STATE & LOC
REGS. PLEASE REVIEW APPROP STATE INDUST WASTE DISP REGS. THIS PROD
IS LISTED UNDER S UPERFUND AMENDMENT & REAUTHORIZATION (SUPP DATA)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.