BNWGY - TURCO DY-CHEK PENETRANT PSU
- MSDS: BNWGY
- Manufacturer: TURCO PRODUCTS INC
- Product Name: TURCO DY-CHEK PENETRANT PSU
- National Stock Number: 6850-00-145-0255
Product Identification
Product ID:TURCO DY-CHEK PENETRANT PSU
MSDS Date:05/02/1991
FSC:6850
NIIN:00-145-0255
Kit Part:Y
MSDS Number: BNWGY
Responsible Party
WESTMINSTER, CA 92684-3600
US
Emergency Phone: 714-387-6200
Info Phone: 714-890-3600
Preparer: FRANK FANTOZZI
Cage: 0BYN5
Contractor
Telephone: 215-419-7890
Cage: 61102
Ingredients
1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE (FREON 113) (SARA
CAS: 76-13-1
RTECS: KJ4000000
Fraction By Weight: 70%
OSHA PEL 1000PPM/1250STEL
ACGIH TLV: 1000PPM/1250STEL9192
CARBON DIOXIDE
CAS: 124-38-9
RTECS: FF6400000
Fraction By Weight: <5%
OSHA PEL 5000 PPM
ACGIH TLV: 5000PPM/30000STEL;93
LINEAR ALKYL BENZENE
CAS: 68648-87-3
Fraction By Weight: 15%
HYDROTREATED MIDDLE PETROLEUM DISTILLATE
CAS: 64742-46-7
RTECS: JN9379645
Fraction By Weight: 100%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:IRRITATION. SKIN:MILD IRRITATION.
INHALATION:CAN CAUSE SUFFOCATION, BREATHING HIGH CONCENTRATIONS OF
VAPOR MAY CAUSE LIGHT-HEADEDNESS, GIDDINESS, SHORTNESS OF BREATH,
AND MAY LEAD TO NARCOSIS, CAR DIAC IRREGULARITIES, UNCONSCIOUSNESS
ORDEATH. INGESTION:MAY BE HARMFUL.
Effects of Overexposure:EYES:MOD IRRIT,REDNESS/TEAR. SKIN:MOD IRRIT,
DRY. INH:SHORTNESS OF BREATH, DIFFICULTY IN BREATHING, GIDDINESS,
CARDIAC IRRAGULARITIES.
Medical Cond Aggravated by Exposure:HEART AND PULMONARY DISORDERS.
First Aid
First Aid:SKIN/EYES:FLUSH W/WATER.IF IRRITATION PERSISTS, CALL A
PHYSICIAN. ING:DO NOT INDUCE VOMITING. GET MED ATTN IMMED.
INH:REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT,GIVE OXYGEN &
GET MED HELP AT ONCE.
Fire Fighting
Flash Point:NON-FLAMMABLE
Extinguishing Media:CARBON DIOXIDE, FOAM AND WATER FOG.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR PROTECTIVE CLOTHING
AND SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CONTENTS UNDER PRESSURE. HEATING ABOVE
120F MAY CAUSE CONTAINERS TO BURST. FIRE OR EXCESSIVE HEAT MAY
CAUSE PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS.
Accidental Release
Spill Release Procedures:VENTILATE AREA. ELIMINATE SOURCE OF IGNITION.
WEAR PROTECTIVE EQUIP. DAM UP W/SANDBAGS OR SOAK UP ON ABSORBENT
MATERIALS. PUMP LIQ &/OR SWEEP ABSORBED LIQ INTO SEALABLE
CONTAINERS.
Handling
Handling and Storage Precautions:STORE BELOW 120F.
Other Precautions:USE IN A WELL VENTILATED AREA.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED RESPIRATOR W/SELF CONTAINED
BREATHING APPARATUS.
Ventilation:LOCAL./MECHANICAL (GEN)
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:EYE WASH
Work Hygienic Practices:DO NOT EAT, DRINK OR SMOKE WHILE WORKING WITH
THIS PRODUCT.
Supplemental Safety and Health
KEY1:J7. THIS PRODUCT IS A KIT CONSISTING OF THREE PARTS. PENETRANT HAS
PNI A; REMOVER HAS PNI B AND DEVELOPER HAS PNI C, SAME NSN.
Chemical Properties
HCC:V2
NRC/State Lic Num:NOT RELEVANT
Vapor Pres:UNK
Vapor Density:>1.0
Spec Gravity:1.28
Evaporation Rate & Reference:>1.0 (BU ACETATE)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR PURPLISH-RED LIQUID; MILD ODOR
Percent Volatiles by Volume:70
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:TOXIC OXIDES OF CARBON, NITROGEN,
CHLORINE, ACID GASES AND OR OTHER VOLATILE ORGANIC COMPOUNDS.
Disposal
Waste Disposal Methods:TRANSFER TO RECLAIMING CENTER, OR DISPOSE OF IN
ACCORDANCE WITH APPLICABLE FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.