Product ID:HOSE
MSDS Date:08/06/1986
FSC:4720
NIIN:00-624-4059
MSDS Number: BNWMW

Emergency Phone: 517-787-8121/419-238-1190

Info Phone: 517-787-8121/419-238-1190

Cage: 00624

Telephone: 517-787-8121/419-238-1190

Cage: 00624

"NOT HAZARDOUS"

Fraction By Weight: 100%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE- DUST OR SMOKE DURING CUTTING OR
BURNING MAY CAUSE IRRITATION OF EYES, RESPIRATORY TRACT AND SKIN.
CHRONIC- NONE KNOWN.
Effects of Overexposure:DUST OR SMOKE DURING CUTTING OR BURNING MAY
CAUSE IRRITATION OF EYES, RESPIRATORY TRACT AND SKIN.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:GET MEDICAL ATTENTION IF SYMPTOMS PERSIST. SKIN:WASH WITH
SOAP & WATER. EYE:FLUSH WITH WATER FOR 15 MINUTES, HOLDING EYELIDS
OPEN. INHALED:REMOVE TO FRESH AIR & PROVIDE OXYGEN/CPR IF NEEDED.
ORAL:NOT LIKELY.

Extinguishing Media:ANY CLASS A, B, OR C FIRE EXTINGUISHER. USE WATER
SPRAY TO COOL FIRE EXPOSED CONTAINERS.
Fire Fighting Procedures:WEAR NIOSH-APPROVED SELF-CONTAINED BREATHING
APPARATUS.
Unusual Fire/Explosion Hazard:MAY LIBERATE SMOKE WHEN BURNED.

Spill Release Procedures:FOR DUST, SWEEP OR VACUUM. OBSERVE PRUDENT
PERSONAL HYGIENE PROCEDURES TO MINIMIZE EXPOSURE.

Handling and Storage Precautions:STORAGE- NONE KNOWN.
Other Precautions:WASH THOROUGHLY AFTER HANDLING.

Respiratory Protection:NIOSH-APPROVED DUST RESPIRATOR IF REQUIRED TO
MAINTAIN EXPOSURES DURING CUTTING BELOW SAFE EXPOSURE LIMITS.
Ventilation:REQUIRED DURING CUTTING.
Protective Gloves:RECOMMENDED
Eye Protection:DESIRABLE DURING CUTTING
Other Protective Equipment:EYE BATH STATION
Work Hygienic Practices:WASH EXPOSED SKIN SURFACES PRIOR TO EATING,
DRINKING OR SMOKING TO MINIMIZE EXPOSURE.
Supplemental Safety and Health
MANUFACTURER STATES THAT AEROQUIP HOSE IS GENERALLY CONSIDERED TO BE AN
"ARTICLE" AS DEFINED IN OSHA'S HAZARD COMMUNICATION STANDARD
(29CFR1910.1200). HOWEVER, CUTTING/BURNING HOSE MAY RELEASE SMOKE O
R OTHER UNKNOWN PRODUCTS OF COMBUSTION.THIS MSDS MAY APPLY SOLELY
TO MANUFACTURING OPERATIONS IN CUTTING & BURNING HOSE

HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:HOSE

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:FIRE, EXCESSIVE HEAT, FLAME
Hazardous Decomposition Products:SMOKE OR OTHER UNKNOWN PRODUCTS OF
COMBUSTION WHEN BURNED.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE
AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.