BPBCP - C97800, COPPER BASE ALLOYS

  • MSDS: BPBCP
  • Manufacturer: N P
  • Product Name: C97800, COPPER BASE ALLOYS
  • National Stock Number: 9535-00N032720
Product Identification

Contractor
DELTA CENTRIFUGAL CORP
TEMPLE, TX 76503-1043 US

Telephone: 817-773-9055;817-773-0831

Cage: 1S741

Ingredients

METALLIC TASTE IN MOUTH & METAL FUME FEVER,WHICH

RTECS: 9999999ZZ


OVEREXP MAY CAUSE GI UPSET & VARIOUS NERV

RTECS: 9999999ZZ


MUSCULAR PAINS. ANTIMONY TRIOXIDE HAS BEEN LBLD A

RTECS: 9999999ZZ


LISTING OF OCCUP REPROD HAZ.SEEK CONSULTATION FROM

RTECS: 9999999ZZ


INFORMATION AND SAFE HANDLING AND EXPOSURE

RTECS: 9999999ZZ


TO PVNT SKIN SENSIT & DERM. SFTY EYEWASH

RTECS: 9999999ZZ


AREAS. EAR PLUGS OR EAR MUFFS SHOULD BE WORN WHERE

RTECS: 9999999ZZ


WASH HANDS BEFORE EATING OR USING RESTROOM.

RTECS: 9999999ZZ


WORK IS ADVISABLE.

RTECS: 9999999ZZ


COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: BALANCE

OSHA PEL 0.1MG/M3 FUME;1 DUST

ACGIH TLV: 0.2MG/M3 FUME;1 DUST

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 0-16%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3


LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 0-11%

OSHA PEL 0.05 MG/M3

ACGIH TLV: 0.15 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


ZINC (SARA III) (LIMITS AS ZINC OXIDE)

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 0-42%

OSHA PEL 10 MG/M3;5 RESP

ACGIH TLV: 10 MG/M3 TDUST

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: 0-5.50%

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3


ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: 0-.50%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


NICKEL (INCLUDING COBALT) (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 0-32%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3


SULFUR

CAS: 7704-34-9

RTECS: WS4250000

Fraction By Weight: 0-.08%


PHOSPHOROUS (SARA III)

CAS: 7723-14-0

RTECS: TH3500000

Fraction By Weight: 0-.50%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 0-11%

OSHA PEL 15MG/M3 DUST;5 FUME

ACGIH TLV: 10MG/M3 DUST


MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0-5%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293


SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 0-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


OVEREXP CAN AFFECT CNS, ULTIMATELY LEADING TO

RTECS: 9999999ZZ


OVEREXP BY BRTHG/SWALLOWING LEAD FUMES/DUST CAN

RTECS: 9999999ZZ


ACHING BONES & MUSCULAR WEAK.LONG TERM OVEREXP CAN

RTECS: 9999999ZZ


OVEREXP TO FUMES/DUSTS MAY CAUSE IRRIT TO

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:CASTINGS IN SOLID FORM PRESENT 2 TYPES
HLTH HAZ:ALLERGIC RXN CAUSED BY PRLNGD CONT TO CASTING IN
SOLID/DUST FORM. OR:IF CONT IS MADE W/CASTING W/SUFF FORCE TO CAUSE
PHYS DEFORM OF PERS W/WHOM IT COMES IN CONT.EXPOS OVER SPECIFIED
LIM TO CERTAIN ELEMENTS HAVE BEEN KNOWN TO CAUSE CERTAIN CNDTNS.
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:LEAD: (IARC) GRP 2B. NICKEL: (IARC) GRP
1, (NTP) ANTICPATED TO BE A CARCINOGEN.
Effects of Overexposure:HLTH HAZ: PARTIAL LIST OF THESE CNDTNS BY
ELEMENT FOLLOWS. ING 5: OVER LONG PERIOD OF TIME, SIDEROSIS/IRON
PIGMENT OF LUNGS MAY DEVELOP. THIS WILL BE VISIBLE ON CHEST X-RAY
BUT SHOULD CAUSE LITTLE/NO DISABILITY. ING 7: HAS BEEN SHOWN TO
CAUSE CANCER IN LAB ANIMALS. POTNTL OF NI TO CAUSE CANCER IN HUMANS
HAS (SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:ALLERGIC RXN:WASH THORO & AVOID FUTURE CONT.SEEK MED
ADVICE.PHYS DEFORM:CNTRL BLEEDING, ADMIN CPR, KEEP VICTIM WARM,
CALL MD.IF BROKEN BONES, DO NOT MOVE VICTIM.EYE: FLUSH W/RUNNING
H*2O FOR AT LST 15 MIN TO REMOVE PARTICULATE. GET MED ATTN.SKIN:
BRUSH OFF EXCESS DUST.WASH AREA WELL W/SOAP & H*2O. INHAL:REMOVE TO
FRESH AIR.GET MED ATTN. INGEST: SEEK MED HELP IF LRG QTYS OF MATL
HAVE BEEN INGESTED.

Accidental Release

Spill Release Procedures:IF LRG CENTRIFUGAL CASTING IS ROLLING IN YOUR
DIRECTION,GET OUT OF WAY.LRG QTYS OF DUST SHOULD BE REMOVED BY
VACUUMING/WET SWEEPING TO PVNT HEAVY CONC OF AIRBORNE DUST.CLEAN-UP
PERS SHOULD WEAR NIOSH/ MSHA APPROVED RESP AND PROT CLTHG.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:USE GOOD HOUSEKEEPING PRACTICES TO
PREVENT ACCUMULATIONS OF DUST AND TO KEEP AIRBORNE DUST
CONCENTRATIONS AT MIN. AVOID BREATHING DUST OR FUMES.
Other Precautions:STORE MATL AWAY FROM INCOMPAT MATLS & KEEP DUST AWAY
FROM SOURCES OF IGNIT. LRG CENTRIFUGAL CASTINGS SHLD NOT BE STORED
ON INCLINES W/OUT ADEQ BLOCKING. DUST/FUMES GEN BY PROCESSING SHLD
BE CTRLD TO A VOID EXCEEDING LIMITS FOR EACH ELEMENT.

Exposure Controls

Respiratory Protection:IF VENTILATION IS NOT SUFFICIENT, THEN EMPLOYEES
SHOULD WEAR NIOSH/MSHA APPROVED RESPIRATORS FOR PROTECTION AGAINST
DUST OR FUMES.
Ventilation:WHEN WELDING/CUTTING/GRINDING ON CASTINGS, USE GEN & LOC
EXHST VENT TO KEEP AIRBORNE CONC OF DUST/FUMES BELOW TLV.
Protective Gloves:WORK GLOVES FOR SHARP EDGES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR FULL PROT CLTHG (FOR DUST), SFTY SHOES
EQUIP W/STEEL TOES & METATARSALS. GLOVES & BARRIER CREAMS MAY BE
NEC(ING 22)
Work Hygienic Practices:SHOWERING SHOULD BE REQD BEFORE CHANGING INTO
STREET CLTHS. FOOD SHOULD NOT BE CONSUMED IN WORK AREA. (ING 24)
Supplemental Safety and Health
EXPLO HAZ:SOME ALLOYS WHEN EXPOS TO HEAT/FLAME, ELEC CURRENT, SPARK IN
PRESENCE OF SUFF O*2. EFTS OF OVEREXP:ING 11:OVEREXP TO DUST/FUMES
MAY CAUSE METAL FUME FEVER W/FLU-LIKE SYMP. CHRONIC OVEREXP CA N
CAUSE MN POIS.EARLY SYMP INCL HDCH,APATHY, SLEEPINESS & WEAK/CRAMPS
IN LEGS. CONTINUED (ING 13)

Stability

Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Product ID:C97800, COPPER BASE ALLOYS
MSDS Date:01/01/1987
FSC:9535
NIIN:00N032720
MSDS Number: BPBCP

Waste Disposal Methods:SCRAP METAL CAN BE RECLAIMED FOR REUSE. FOLLOW
FEDERAL, STATE AND LOCAL REGULATIONS REGARDING DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.