BPBSP - ELECTRODE 190 0N10 (ENICU-7)
- MSDS: BPBSP
- Manufacturer: NATIONAL WELDING ALLOYS INC
- Product Name: ELECTRODE 190 0N10 (ENICU-7)
- National Stock Number: 3439-00-238-5666
Product Identification
Product ID:ELECTRODE 190 0N10 (ENICU-7)
MSDS Date:08/01/1990
FSC:3439
NIIN:00-238-5666
MSDS Number: BPBSP
Responsible Party
PITTSBURGH, PA 15215
US
Emergency Phone: 412-781-4255
Info Phone: 412-781-4255
Cage: 0ACE2
Contractor
Telephone: 412-781-4255
Cage: 0ACE2
Ingredients
GRAPHITE, NATURAL
CAS: 7782-42-5
RTECS: MD9659600
Fraction By Weight: 0.75%
OSHA PEL 15 MPPCF RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9293
CHROMIUM (SARA III)
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: 0.15%
OSHA PEL 1 MG/M3
ACGIH TLV: 0.5 MG/M3; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
IRON OXIDE
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: BALANCE
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
MANGANESE (SARA III)
CAS: 7439-96-5
RTECS: OO9275000
Fraction By Weight: 2.50%
OSHA PEL (C) 5 MG/M3 DUST
ACGIH TLV: 5 MG/M3 DUST 9293
MOLYBDENUM
CAS: 7439-98-7
RTECS: QA4680000
Fraction By Weight: 4.00%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3; 9293
NICKEL (SARA III)
CAS: 7440-02-0
RTECS: QR5950000
Fraction By Weight: 62-69%
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 9192
SILICA, CRYSTALLINE - FUSED
CAS: 60676-86-0
RTECS: VV7328000
Fraction By Weight: 1.50%
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
VANADIUM (SARA III)
CAS: 7440-62-2
RTECS: YW1355000
Fraction By Weight: 1.00%
OSHA PEL C,0.5 MG V2O5/M3 RD
ACGIH TLV: 0.05 MG V205/M3;9293
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:WELDING GENERATES FUMES, GASES AND
ELECTROMAGNETIC RADIATION WITH KNOWN ADVERSE HEALTH EFFECTS. LONG
TERM EXPOSURE TO IRON FUME MAY PRODUCE SIDEROSIS, WHICH IS
GENERALLY REGARDED AR BENIGN.
Explanation of Carcinogenicity:THIS MATERIAL CONTAINS NICKEL AND
CHROMIUM COMPOUNDS.
Effects of Overexposure:SHORT TERM EXPOSURE TO WELDING FUME MAY RESULT
IN DISCOMFORT, DIZZINESS, NAUSEA AND DRYNESS OR IRRITATION OF THE
THROAT. LONG TERM EXPOSURE TO WELDING FUME, GASES OR DUST MAY
CONTRIBUTE TO PULMONARY I RRITATION OR PNEUMOCONIOSIS.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH IMPAIRED PULMONARY
FUNCTION OR ILLNESS MAY HAVE SYMPTOMS EXACERBATED BY IRRITANTS
CONTAINED IN WELDING FUMES.
First Aid
First Aid:REMOVE FROM DUST OR FUME EXPOSURE. IF BREATHING HAS STOPPED,
PERFORM ARTIFICIAL RESPIRATION. SUMMON MEDICAL AID IMMEDIATELY.
Fire Fighting
Extinguishing Media:THIS ALLOY IS NONCOMBUSTIBLE. USE EXTINGUISHING
MEDIA AS APPROPRIATE TO THE SURROUNDING FIRE.
Fire Fighting Procedures:IF THIS MATERIAL IS REDUCED TO POWDER FORM,
CAUTION MUST BE USED TO PREVENT FIRE OR EXPLOSION. TO EXTINGUISH A
METAL POWDER FIRE USE DRY SAND OR DRY GRAPHITE.
Unusual Fire/Explosion Hazard:NO UNUSUAL FIRE OR EXPLOSION HAZARDS ARE
ASSOCIATED WITH THIS MATERIAL.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:USE EXHAUST SYSTEM TO CLEAR WELDING FUMES. MAKE SURE
THAT INHALED AIR DOES NOT CONTAIN FUME CONSTITUENTS ABOVE
PERMISSABLE LEVELS.
Exposure Controls
Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR-SUPPLIED
RESPIRATOR WHEN WELDING, BRAZING OR SOLDERING IN CONFINED SPACE OR
WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW
PEL, TLV OR STEL.
Ventilation:USE ENOUGH VENTILATION, LOCAL EXHAUST AT THE ARC (OR
FLAME), OR BOTH, TO KEEP FUMES AND GASES BELOW PEL'S, TLV'S, STEL'S
Protective Gloves:WELDER'S GLOVES.
Eye Protection:PROTECTIVE FACE SHIELD.
Other Protective Equipment:ARM PROTECTORS, APRONS, HATS, SHOULDER
PROTECTION, AS WELL AS DARK SUBSTANTIAL CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:ELECTRODES ARE COATED WITH FLUX FOR USE WITH
SHIELDED METAL ARE WELDING PROCESS
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:VARIOUS ELEMENTAL METALS AND METAL
OXIDES MAY BE GENERATED FROM MELTING OR DROSS HANDLING OPERATIONS.
Disposal
Waste Disposal Methods:PREVENT WASTE FORM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE, A ND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.