BPDKV - CPS 233814, METALWORKING FLUID 504
- MSDS: BPDKV
- Manufacturer: CHEVRON
- Product Name: CPS 233814, METALWORKING FLUID 504
- National Stock Number: 9150-00N030006
Product Identification
Product ID:CPS 233814, METALWORKING FLUID 504
MSDS Date:11/01/1985
FSC:9150
NIIN:00N030006
MSDS Number: BPDKV
Responsible Party
US
Emergency Phone: 415-233-3737
Info Phone: 415-233-3737
Cage: 0AHD1
Contractor
Telephone: 800-582-3835
Cage: 0AHD1
Ingredients
MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED HEAVY
CAS: 64742-54-7
RTECS: PY8035500
ADDITIVES INCLUDING INGREDIENTS 6, 7, AND 8.
Fraction By Weight: <10%
INHIBITORS
ANTIWEAR AGENTS
EXTREME PRESSURE AGENTS
PARAFFIN WAXES AND HYDROCARBON WAXES,
CAS: 63449-39-8
Fraction By Weight: <4%
HIGHLY REFINED BASE OILS CONSISTING OF INGREDIENTS 2-4.
RTECS: 9999999ZZ
Fraction By Weight: >90%
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3;10 STEL
PETROLEUM DISTILLATES, CLAY-TREATED HEAVY PARAFFINIC
CAS: 64742-36-5
MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY
CAS: 64742-65-0
RTECS: PY8038500
OSHA PEL NOT APPLICABLED
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYE:EXPECTED TO CAUSE NO MORE THAN
MINOR IRRITATION. SKIN:EXPECTED TO CAUSE NOT MORE THAN MINOR SKIN
IRRITATION FOLLOWING PROLONGED OR FREQUENTLY REPEATED CONTACT.
INHAL:NOT EXPECTED TO BE ACUTELY TOX IC BY INHALATION. BREATHING
MINERAL OILMIST AT CONC IN AIR THAT EXCEED RECOMMENDED EXPOSURE
STANDARD (EFTS OF OVEREXP)
Explanation of Carcinogenicity:CHLOROPARAFFIN WAXES & HYDROCARBON
WAXES: GROUP 2B (IARC). KEROSENE, HYDROTREATED:GROUP 2A (IARC).
Effects of Overexposure:HLTH HAZ:CAN CAUSE RESPIRATORY IRRITATION OR
DISCOMFORT. SIGNS/SYMPTOMS OF RESP TRACT IRRIT MAY INCLUDE NASAL
DISCHARGE, NOSEBLEED, SORE THROAT, COUGHING, BRONCHITIS PULMONARY
EDEMA & DIFFICULTY IN BR EATHING. INGEST:NOT EXPECTED TO HAVE ACUTE
SYSTEMIC TOXICITY BY INGESTION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE:FLUSH IMMED W/FRESH WATER FOR AT LEAST 15 MINS WHILE
HOLDING EYELIDS OPEN. IF IRRIT PERSISTS, GET MD. SKIN:WASH THORO
W/SOAP & WATER. LAUNDER CONTAM CLTHG. INHAL:IF RESP DISCOMFORT OR
IRRIT OCCURS , MOVE TO FRESH AIR. GET MD IF DISCOMFORT/IRRIT
CONTINUES. INGEST:GIVE WATER/MILK TO DRINK & CALL MD. CONSULT MD
BEFORE INDUCING VOMIT. IF MD NOT AVAIL TAKE PERS & PROD CNTNR TO
MED TREATMENT CTR/HOSP
Fire Fighting
Flash Point:>350F,>177C
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . SEE HAZARDOUS DECOMPOSITION PRODUCTS. READ
ENTIRE MSDS.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:STOP SOURCE OF LEAK OR RELS. CLEAN UP RELS AS
SOON AS POSS. CNTN LIQ TO PVNT FURTHER CONTAM OF SOIL, SURF WATER
OR GROUNDWATER. CLEAN UP SMALL SPILLS USING APPROP TECHNIQUES SUCH
AS SORBENT MATLS OR P UMPING. WHERE FEASIBLE & APPROP,
REMOVE(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT WELD, HEAT OR DRILL CONTAINER.
RESIDUE MAY IGNITE WITH EXPLOSIVE VIOLENCE IF HEATED SUFFICIENTLY.
Other Precautions:DO NOT USE PRESSURE TO EMPTY DRUM OR EXPLOSION MAY
RESULT. PRECAUTIONS OUTLINED IN THIS MSDS SHOULD BE CAREFULLY
OBSERVED.
Exposure Controls
Respiratory Protection:NO SPECIAL RESPIRATORY PROTECTION IS NORMALLY
REQUIRED. HOWEVER, IF OPERATING CONDITIONS CREATE AIRBORNE
CONCENTRATIONS WHICH EXCEED RECOMMENDED EXPOSURE STANDARD, THE USE
OF A NIOSH/MSHA APPROVED RES PIRATOR IS RECOMMENDED.
Ventilation:VENTILATION TO KEEP THE AIRBORNE CONCENTRATIONS OF THIS
MATERIAL BELOW THE RECOMMENDED EXPOSURE STANDARD.
Protective Gloves:IMPERVOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPILL PROC:CONTAMINATED SOIL. FOLLOW PRESCRIBED PROCEDURES FOR
REPORTING AND RESPONDING TO LARGER RELEASES. NOT EXPECTED TO
PRESENT ANY ENVIRONMENTAL PROBLEMS OTHER THAN THOSE ASSOCIATED WITH
OIL SPIL LS.
Chemical Properties
HCC:V6
Spec Gravity:0.88 @ 15.6C
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER "TACKY" LIQUID
Stability
Stability Indicator/Materials to Avoid:YES
MAY REACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NORMAL COMBUSTION FORMS CO2 & WATER
VAPOR & MAY PRODUCE SOX & TOX CHLORINE CMPD; INCOMPLETE COMBUST CAN
PRODUCE CO.
Disposal
Waste Disposal Methods:PLACE CONTAMINATED MATERIALS IN DISPOSABLE
CONTAINERS AND DISPOSE OF IN A MANNER CONSISTENT WITH APPLICABLE
REGULATIONS. CONTACT LOCAL, STATE AND FEDERAL HEALTH AUTHORITIES
FOR APPROVED DISPOSAL OF TH IS MATERIAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.