Product ID:ACETONE
MSDS Date:05/01/1990
FSC:6810
NIIN:01-107-2903
MSDS Number: BPFJK

PARKS CORP

SOMERSET, MA 02726
US

Emergency Phone: 508-679-5938

Info Phone: 508-679-5938

Cage: GO179

PARKS CORPORATION

5 SOMERSET, MA 02726 US

Telephone: 508-679-5938

Cage: 6L244

ACETONE

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 100%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: CAN CAUSE SEV IRRIT, REDNESS,
TEARING, BLURRED VISION. SKIN: PRLNGD/RPTD CONT CAN CAUSE MOD
IRRIT, DEFAT DERM. INHAL: EXCESS INHAL OF VAPS/MISTS MAY CAUSE
IRRIT OF NOSE & THROAT, NAUS, VOMIT, & SIGNS OF NERVOUS SYS
DEPRESS (E.G., HDCH, DROW, DIZZ, LOSS OF COORDINATION, & FATIGUE),
INGEST: (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: (SWALLOWING) WHILE MATL HAS LOW
DEGREE OF TOX, INGEST OF EXCESSIVE QTYS MAY CAUSE IRRIT OF
DIGESTIVE TRACT & SIGNS OF NERVOUS SYS DEPRESS (E.G., HDCH, DROW,
DIZZ, LOSS OF COORDINATION, & FAT IGUE). COMMENTS: REPORTS HAVE
ASSOCIATED RPTD/PRLNGD OCCUP OVEREXP TO SOLV W/PERM BRAIN & NERVOUS
SYS DMG (SUPP DATA)
Medical Cond Aggravated by Exposure:RESPIRATORY SYMPTOMS ASSOCIATED
WITH PRE-EXISTING LUNG DISORDERS (E.G., ASTHMA-LIKE CONDITIONS) MAY
BE AGGRAVATED BY EXPOSURE TO MATERIAL.

First Aid:EYE: MOD HAZARD TO EYES, BUT LIQ CONT SHD BE TREATED WITH
FLUSHING EYES WITH WATER FOR AT LEAST 15 MINUTES. SKIN: SKIN
CONTACT IS ONLY SLIGHT HAZARD. HOWEVER, SKIN SHD BE FLUSHED WITH
WATER. INHALATIO N: REMOVE TO FRESH AIR. APPLY ARTIFICIAL
RESPIRATION AND CALL PHYSICIAN. INGESTION: INDUCE VOMITING IF
PATIENT IS CONSCIOUS. CALL PHYSICIAN IMMEDIATELY.

Flash Point Method:TCC
Flash Point:0F,-18C
Lower Limits:2.6%
Upper Limits:13.0%
Extinguishing Media:USE CO*2/DRY CHEM FOR SMALL FIRES. USE "ALCOHOL"
TYPE FOAM FOR LARGER FIRES. H*2O SPRAY WILL REDUCE INTENSITY OF
FLAMES.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED POSITIVE PRESSURE SCBA
& FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:KEEP WORK AREA FREE OF HOT METAL SURFACES
AND OTHER SOURCES OF IGNITION.

Spill Release Procedures:KEEP PUBLIC AWAY. SHUT OFF SOURCE IF POSS TO
DO SO W/OUT HAZ, ELIMINATE SOURCE OF IGNIT. USE SUITABLE PROT
EQUIP. FLUSH SPILLED MATL INTO SUITABLE RETAINING AREAS/CNTNRS
W/LRG QTYS OF H*2O. SMALL AMTS OF SPILLED MATL MAY BE ABSORB INTO
(SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP PRODUCT CONTAINER COOL, DRY AND
AWAY FROM SOURCES OF IGNITION. USE AND STORE THIS PROD WITH
ADEQUATE VENTILATION.
Other Precautions:AVOID INHALATION OF VAPORS. REMOVE SATURATED CLOTHING
AND FLUSH AFFECTED AREAS WITH WATER. PERSONAL CONTACT SHOULD BE
AVOIDED. POSITIVELY NO SMOKING.

Respiratory Protection:USE NIOSH/MSHA APPROVED AIR SUPPLIED MASK.
Ventilation:LOCAL EXHAUST SUGGESTED. MECHANICAL: EXPLOSION-PROOF.
Protective Gloves:RUBBER GLOVES- IMPERMEABLE.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE BATH AND SAFETY SHOWER. IMPERMEABLE
APRONS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP: (SOME TIMES REFERRED TO AS SOLV/PAINTERS' SYNDROME).
INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND INHALING
PRODUCT MAY BE HARMFUL/FATAL. SPILL PROC:AN APPROPRIATE ABSORBENT.
C OLLECT IN FLAMMABLE WASTE CONTAINER FORDISPOSAL.

Boiling Pt:B.P. Text:133F,56C
Vapor Pres:186 @ 68F
Vapor Density:HVR/AIR
Spec Gravity:0.7905 @ 20/20C
Evaporation Rate & Reference:<1 (ETHER=1)
Solubility in Water:COMPLETE
Appearance and Odor:LIQUID, SHARP PENETRATING AND NON-RESIDUAL ODOR.
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
AVOID CATALYST SUCH AS BA(OH)*2, NAOH AND OTHER ALKALIES, H*2SO*4.
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAME.
Hazardous Decomposition Products:BURNING CAN PRODUCE CO AND/OR CO*2.
Conditions to Avoid Polymerization:LOW TEMP WHEN IN PRESENCE OF
CATALYSTS. CONDENSATION WILL OCCUR. IF TEMP RISES, RXN STOPS AND
MATERIAL WILL COOL DOWN.

Waste Disposal Methods:INCINERATE IN FURNACE WHERE PERMITTED UNDER
APPROPRIATE FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.