BPGYR - 1827, ALKA-PRIME WHITE
- MSDS: BPGYR
- Manufacturer: PARKER PAINT
- Product Name: 1827, ALKA-PRIME WHITE
- National Stock Number: 8010-00N031110
Product Identification
Product ID:1827, ALKA-PRIME WHITE
MSDS Date:06/01/1987
FSC:8010
NIIN:00N031110
MSDS Number: BPGYR
Responsible Party
TACOMA, WA 98411-0047
US
Emergency Phone: 206-473-1122
Info Phone: 206-473-1122
Preparer: B. WEAR
Cage: 9H480
Contractor
Telephone: 253-473-1122
Cage: 9H480
Ingredients
2.0 @ 68F
CAS: 64742-88-7
Fraction By Weight: 45%
OSHA PEL 500 PPM (MFR)
ACGIH TLV: 100 PPM (MFR)
SILICA, CRYSTALLINE - QUARTZ; (SILICON DIOXIDE)
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: 5%
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
DIATOMACEOUS EARTH, FLUX - CALCINED; (DIATOMACEOUS SILICA)
CAS: 68855-54-9
Fraction By Weight: <5%
OSHA PEL 10 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:INHAL:HIGH CONCENTRATIONS OF VAPORS
MAY LEAD TO NASAL IRRITATION, HEADACHE, NAUSEA,
ASPHYXIATION/UNCONSCIOUSNESS. SKIN: REPEATED CONTACT CAN DEFAT SKIN
CAUSING IRRITATION & DERMATITIS. EYE: CONTACT CA N CAUSE SEVERE
IRRITATION, REDNESS, TEARING OR BLURRED VISION. INGEST:SWALLOWING
CAN CAUSE GI IRRIT (EFTS OF OVEREXPOS)
Explanation of Carcinogenicity:CRYSTALLINE SILICA:IARC -2A, NTP -2.
Effects of Overexposure:HLTH HAZ:NAUS, VOMIT & DIARR. VOMIT CAN RESULT
IN ASPIR OF MATL INTO THE LUNGS WHICH CAN CAUSE CHEM PNEUM. ACUTE:
OVEREXPOS CAN CAUSE SKIN & EYE IRRIT. INHAL CAN CAUSE ACUTE NERVOUS
SYS DEPRESS CHARAC TERIZED BY NASAL IRRIT, HDCH, DIZZ, CONFUSION/
UNCONSCIOUSNESS. CHRONIC:OVEREXPOS TO VAPS MAY CAUSE KIDNEY/LIVER
DMG.
Medical Cond Aggravated by Exposure:NONE KNOWN AT THIS TIME.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED, APPLY
ARTIFICIAL RESPIRATION. CONSULT MD. EYE:WASH WITH CLEAN WATER FOR
AT LEAST 15 MINUTES. CONSULT MD. SKIN:WASH AFFECTED AREAS WITH SOAP
AND WAT ER. REMOVE CONTAMINATED CLOTHING. CONSULT MD IF IRRITATION
PERSISTS. INGEST:DRINK 1-2 GLASSES OF WATER TO DILUTE. DO NOT
INDUCE VOMITING. CONSULT MD OR POISON CONTROL CENTER.
Fire Fighting
Flash Point Method:SCC
Flash Point:105F,41C
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:FOAM, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
H2O MAY BE USED TO COOL CLSD CONTRS TO PVNT PRESS BUILD UP & POSS
AUTOIGNIT/EXPLOS WHEN EXPOS TO (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CONTR TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS & OPEN FLAME. CLSD CONTRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DURING EMERG (SUPDAT)
Accidental Release
Spill Release Procedures:VENTILATE AREA. REMOVE ALL SOURCES OF IGNITION
(FLAME, HOT SURFACES, ELECTRICAL, STATIC OR FRICTIONAL SPARKS).
AVOID SKIN CONTACT AND BREATHING VAPORS. CONTAIN AND REMOVE WITH
ABSORBENT AND NON-SPARKI NG TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL, WELL VENTILATES AREA
AWAY FROM SOURCES OF IGNITION. STORE LARGE QUANTITIES ONLY IN
BUILDINGS DESIGNED TO COMPLY WITH OSHA 1910.106.
Other Precautions:DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF
CHILDREN.
Exposure Controls
Respiratory Protection:WEAR A NIOSH/MSHA APPROVED PROPERLY FITTED
VAPOR/ PARTICULATE RESPIRATOR OR AN AIR-SUPPLYING RESPIRATOR UNLESS
VENTILATION IS ADEQUATE TO KEEP AIRBORNE CONTAMINATION BELOW
APPLICABLE OSHA, PEL OR ACGI H TLV OCCUPATIONAL EXPOSURE LIMITS.
Ventilation:PROVIDE SUFFICIENT VENT IN VOLUME & PATTERN, WITH EXPLOS
PROOF EQUIP TO KEEP AIR CONTAM CONC BELOW APPLICABLE (SUPDAT)
Protective Gloves:RUBBER OR NEOPRENE GLOVES.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FCSHLD.
Other Protective Equipment:COVERALLS, GLOVES & HOOD ARE REC DURING
SPRAY APPLICATION. PROT CREAMS MAY BE USED FOR EASE OF CLEAN-UP,
NOT FOR PROT.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING RESTROOM.
Supplemental Safety and Health
FIRE FIGHT PROC:EXTREME HEAT. EXPOS HAZ: CONDITIONS, OVEREXPOSURE TO
DECOMPOSITION PRODUCTS MAY CAUSE A HEALTH HAZARD. VENT:OSHA PEL OR
ACGIH OCCUPATIONAL EXPOSURE LIMITS.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:314F,157C
Vapor Pres:SEE ING
Vapor Density:HVR/AIR
Spec Gravity:1.1 (H2O = 1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:A WHITE COLORED LIQUID WITH ALIPHATIC ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIALS.
Stability Condition to Avoid:EXTREME HEAT, SPARKS OR OPEN FLAME.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN PRODUCE CO.
Disposal
Waste Disposal Methods:DO NOT ALLOW MATERIAL TO CONTAMINATE GROUND
WATER SYSTEMS, ABSORB LARGE SPILLS WITH SAND, CLAY OR DIATOMACEOUS
EARTH, DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.