Product ID:S100B FM-259, CORROSION RESISTANT ALLOYS
MSDS Date:02/01/1989
FSC:3439
NIIN:00N031149
MSDS Number: BPGZY

HAYNES INTERNATIONAL INC

1020 WEST PARK AVE
KOKOMO, IN 46904-9013
US

Emergency Phone: 317-456-6894;800-424-9300(CHEMTREC)

Info Phone: 317-456-6625

Preparer: SAFETY DEPARTMENT

Cage: 80357

HAYNES INTERNATIONAL INC SUB OF CABOT CORP

9013 KOKOMO, IN 46904-9013 US

Telephone: 318-263-2002;765-456-6614

Cage: 80357

GET MD. CONTACT LENSES SHOULD NOT BE WORN IF

RTECS: 9999999ZZ

ENVIRON PROBLEMS.METAL POWDERS/DUSTS MAY HAVE

RTECS: 9999999ZZ

SPILLS & RELEASES TO ENVIRON (DISCHARGE TO STREAMS,

RTECS: 9999999ZZ

CONTROLLED IMMEDIATELY. IF SUCH POTENTIAL FOR SPILL

RTECS: 9999999ZZ

RESPONSE PLAN.

RTECS: 9999999ZZ

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 25%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 1.8%

OSHA PEL 0.1MG/M3 FUME

ACGIH TLV: 0.2MG/M3 FUME

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

IRON (III) OXIDE;(IRON)

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 59%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1.0%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 3.1%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 90-100%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 0.5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:UNDER NORMAL HANDLING & USE OF SOLID
FORM OF THESE MATLS THERE ARE FEW HEALTH HAZS. CUTTING, WELDING,
MELTING, GRINDING, ETC. OF THESE MATLS WILL PRODUCE DUST/FUME OR
PARTICULATE WHICH MAY PRESENT SIG NIF HLTH HAZS. ACUTE:METAL
DUST/FUMES OF THOSE ELEMENTS IN ING SECTION CAN CAUSE IRRIT TO
SKIN, EYES (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL:GROUP 2B (IARC); ANTICIPATED TO
BE A CARCINOGEN (NTP).
Effects of Overexposure:HLTH HAZ:& MUC MEMBS, ALLERGIC SKIN RXNS/ DERM.
INJURY TO EYES IS GENERALLY RSLT OF PARTICULATE IRRIT OR MECH
INJURY TO CORNEA OR CONJUNCTIVA BY DUST. EXCESS INHAL CAN CAUSE
RESP IRRIT, COUGH, BRONCH, CHILLS, "FUME FEVER" & ASTHMA-LIKE
SYMPS. CHRONIC:RESP DISEASE W/ SYMPS RANGING FROM SHORTNESS OF
BREATH & COUGH (SUPDA
Medical Cond Aggravated by Exposure:SKIN SENSITIVITY, PULMONARY
DISEASES, NEUROLOGICAL DAMAGE/DISEASE, AND CIRCULATORY, BLOOD, &
KIDNEY DISEASE.

First Aid:INHAL:IF BRTHG DFCLT, REMOVE TO FRESH AIR. IF BRTHG STOPPED,
GIVE ARTF RESP & GET MD IMMED. INGEST:IF LRG AMTS OF DUST INGESTED,
SWALLOW LRG QTYS OF WATER & ATTEMPT TO INDUCE VOMIT IF CONSCIOUS.
GET M D IMMED. SKIN:TREAT SKIN CUTS/ABRASIONSBY STANDARD FIRST AID.
REMOVE DUST BY WASHING W/SOAP & WATER. IF IRRIT PERSISTS, GET MD.
EYE: FLUSH W/COPIOUS AMTS OF CLEAN WATER FOR AT LEAST 15 MINS. (ING
8)

Flash Point:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:THESE ALLOYS ARE NONCOMBUSTIBLE. USE EXTINGUISHING
MEDIA APPROPRIATE TO THE SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. TO EXTINGUISH METAL POWDER FIRE USE DRY SAND, DRY GRAPHITE OR
OTHER CLASS "D" FIRE EXTINGUISHING POWDER.
Unusual Fire/Explosion Hazard:NO UNUSUAL OR EXPLOSION HAZARDS ARE
ASSOCIATED WITH THESE MATERIALS.

Spill Release Procedures:SOLID FORM:NO SPECIAL CLEAN-UP PROBLEMS. DUST
FORM:USE VACUUM SYS UTILIZING HEPA FILTRATION SYS. MIN AIRBORNE GEN
OF DUST/AVOID CONTAM OF AIR & WATER. PROPERLY LABEL ALL MATLS
COLLECTED IN WASTE CNTNR .IN SOLID FORM THESE MATLS POSE NO
SPECIAL(ING 9)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:THESE PRODUCTS MUST BE HANDLED
ACCORDING TO SIZE, SHAPE AND QUANTITY OF MATERIALS INVOLVED.
Other Precautions:SOLID METAL MAY REQUIRE USE OF HOISTS, CRANES, ETC.
POWDERS SHOULD BE MOVED OR TRANSPORTED TO MINIMIZE SPILL OR RELEASE
POTENTIAL.

Respiratory Protection:USE NIOSH/MSHA APPROVED FUME RESPIRATOR OR AN
AIR SUPPLIED RESPIRATOR WHERE LOCAL EXHAUST/VENTILATION DOES NOT
KEEP EXPOSURE BELOW OSHA PEL.
Ventilation:LOCAL EXHAUST VENTILATION SHOULD BE USED TO CNTRL EXPOS TO
AIRBORNE DUST/FUME WHENEVER POSSIBLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORKERS GOGG/WELDING FSHLD (SUPDAT)
Other Protective Equipment:PROTECTIVE CLOTHING SUCH AS UNIFORMS,
DISPOSABLE COVERALLS, SAFETY SHOES, ETC.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP:TO PERM DISABILITY DUE TO LOSS OF LUNG FUNCTION,
FIBROSIS OR SUBSEQUENT EFTS ON HEART. CNS DEPRESS HAS BEEN
IDENTIFIED W/EXCESSIVE MANGANESE EXPOS. NICKEL/CHROMIUM METAL HAVE
BEEN LINK ED TO RESP TRACT CANCERS. ALUMINUM AND IRON HAVE BEEN
INDICATED TO CAUSE GI DISORDERS. EYE PROT:WITH TINTED LENS .

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:2600F,1427C
Spec Gravity:7.65
Solubility in Water:NONE
Appearance and Odor:SOLID-SILVER GRAY COLOR-NO ODOR
Percent Volatiles by Volume:NONE

Stability Indicator/Materials to Avoid:YES
AVOID CNTCT W/MINERAL ACIDS & OXIDIZING AGENTS WHICH MAY GENERATE
HYDROGEN GAS; EVOLUTION OF HYDROGEN MAY BE EXPLO HAZ.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:ELEMENTAL METALS & METAL OXIDES FROM
WELDING, CUTTING, GRINDING, MELTING OR DROSS OPERATIONS.

Waste Disposal Methods:DISPOSE OF WASTE MATERIAL IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.