BPJFL - M2010, HEAVY DUTY WOVEN LINING

  • MSDS: BPJFL
  • Manufacturer: RAYMARK CORP
  • Product Name: M2010, HEAVY DUTY WOVEN LINING
  • National Stock Number: 2530-00-797-9277
Product Identification

Product ID:M2010, HEAVY DUTY WOVEN LINING
MSDS Date:11/17/1986
FSC:2530
NIIN:00-797-9277
MSDS Number: BPJFL

Responsible Party
RAYMARK CORP
123 E STIEGEL ST
MANHEIM, PA 17545-1626
US

Emergency Phone: 717-665-2211

Info Phone: 717-665-2211

Preparer: RONALD L. RAMSEY

Cage: 8X148

Contractor
RAYMARK CORP
MANHEIM, PA 17545-1626 US

Telephone: 717-665-2211

Cage: 8X148

Ingredients

PHENOLIC RESIN

Fraction By Weight: 15-25%


ASBESTOS, CHRYSOTILE

CAS: 12001-29-5

RTECS: CI6478500

Fraction By Weight: 45-55%

OSHA PEL 0.2 FIBERS/CC

ACGIH TLV: 2 FIBERS/CC; A1;9293


BRASS

Fraction By Weight: 6-25%


GILSONITE

CAS: 12002-43-6

Fraction By Weight: 0-6%


TUNG OIL

CAS: 8001-20-5

Fraction By Weight: 0-30%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:INHALATION-CHRONIC OVEREXPOSURE MAY
CAUSE ASBESTOSIS AND CANCER. INGESTION-NONE. SKIN-ACUTE. MAY CAUSE
SKIN IRRITATION. EYE-ACUTE. MAY CAUSE EYE IRRITATION.
Explanation of Carcinogenicity:THIS MATERIAL IS REGULATED AS A
CARCINOGEN BY ALL THREE AGENCIES.
Effects of Overexposure:ASBESTOSIS IS ASSOCIATED WITH SYMPTOMS OF
LABORED BREATHING, CHEST PAINS, WEAKNESS, AND CHEST TIGHTNESS.
SYPMTOMS ARE NOT USUALLY MANIFESTED UNTIL 15-20 YEARS AFTER
EXPOSURE.
Medical Cond Aggravated by Exposure:RESPIRATORY AILMENTS.

First Aid

First Aid:INHALATION-SMOKING INCREASES RISK TO HEALTH. INGESTION-NONE.
SKIN-WASH THOROUGHLY WITH WATER. EYE-GENTLY RINSE WITH WATER.

Fire Fighting

Extinguishing Media:WATER, CARBON DIOXIDE, FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:VACUUMING USING HEPA-FILTERED EQUIPMENT OR WET
CLEANING IF DUST INVOLVED.

Handling

Handling and Storage Precautions:AVOID CREATING DUST.
Other Precautions:AVOID CREATING DUST, PROHIBIT USE OF COMPRESSSED AIR
FOR CLEANING.

Exposure Controls

Respiratory Protection:NIOSH APPROVED RESPIRATOR IF THE PEL IS
EXCEEDED.
Ventilation:LOCAL VENTILATION IF ENGINEERING CONTROLS ARE INADEQUATE.
Protective Gloves:NOT NORMALLY REQUIRED.
Eye Protection:NOT NORMALLY REQUIRED.
Other Protective Equipment:PROTECTIVE WORK CLOTHING AND EQUIPMENT IS
REQUIRED IF THE PEL IS EXCEEDED.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING, DRINKING OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
NONE

Chemical Properties

HCC:T7
Spec Gravity:1.50
Appearance and Odor:LIGHT BROWN - SLIGHT PHENOLIC ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:AVOID CREATING DUST. COLLECT BY VACUUMING
HEPA-FILTER EQUIPMENT OR IN THE WET STATE TO PREVENT EXCEEDING
EXPOSURE LIMIT.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION MAY RELEASE
TOXIC MATERIALS.

Disposal

Waste Disposal Methods:DISPOSE OF WASTE MATERIAL IN SEALED IMPERMEABLE
BAGS OR OTHER IMPERMEABLE CLOSED CONTAINERS USING PROPER LABELS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.