BPJSY - 404, ULTRA VINYL SPRAY CLEAR

  • MSDS: BPJSY
  • Manufacturer: PLASTI KOTE CO INC
  • Product Name: 404, ULTRA VINYL SPRAY CLEAR
  • National Stock Number: 8010-00N031012
Product Identification

Product ID:404, ULTRA VINYL SPRAY CLEAR
MSDS Date:11/06/1986
FSC:8010
NIIN:00N031012
MSDS Number: BPJSY

Responsible Party
PLASTI-KOTE CO INC
1000 LAKE RD
MEDINA, OH 44256
US

Emergency Phone: 216-725-4511

Info Phone: 216-725-4511

Cage: 07778

Contractor
TEMPO PRODUCTS CO A PLASTI-KOTE CO INC
MEDINA, OH 44256 US

Telephone: 330-725-4511

Cage: 07708

Ingredients

22

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 5-10%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


5.1

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: <5%

OSHA PEL 100 PPM;150 STEL

ACGIH TLV: 100 PPM;150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


PROPELLANT CONSISTING OF ING 7-9.

RTECS: 9999999ZZ

Fraction By Weight: 19%


PROPANE

CAS: 74-98-6

RTECS: TX2275000

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT


PROPANE, 2-METHYL-; (ISOBUTANE)

CAS: 75-28-5

RTECS: TZ4300000

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM


BUTANE; (H-BUTANE)

CAS: 106-97-8

RTECS: EJ4200000

OSHA PEL 800 PPM

ACGIH TLV: 800 PPM


NON HAZARDOUS INGREDIENTS

Fraction By Weight: 10-12%


VARIOUS HAND CLEANERS, AND WASH CLOTHING

RTECS: 9999999ZZ


RESPIRATORY PROTECTION (TC23C OR EQUIVALENT) OR

RTECS: 9999999ZZ


TOLUENE CAS#108-88-3 APPEARS ON THE NAVY LISTING OF

RTECS: 9999999ZZ


PROFESSIONALS CONCERN LATEST HAZ LIST INFO & SAFE

RTECS: 9999999ZZ


70

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 20-25%

OSHA PEL 200 PPM;300 STEL

ACGIH TLV: 200 PPM;300 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


186

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 30-35%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


.8

CAS: 123-42-2

RTECS: SA9100000

Fraction By Weight: 10-15%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:EXCESSIVE INHAL OF VAPS
CAN CAUSE NASAL & RESP IRRIT, DIZZ, WEAKNESS, FATIGUE, NAUS, HDCH,
POSS UNCONSCIOUSNESS & EVEN ASPHY. EYES:CAN CAUSE SEV IRRIT,
REDNESS, TEARING, BLURRED VISION. IN GEST:CAN CAUSE GI IRRIT, NAUS,
VOMIT, DIARR. SKIN:CAN CAUSE IRRIT FOR SOME PERSONS. (EFTS OF
OVEREXPOS)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:CHRONIC:REPORTS HAVE ASSOC RPTD &
PRLNGD OCCUP OVEREXPOS TO SOLVENTS W/PERMANENT BRAIN & NERVOUS SYS
DMG. SEV OVEREXPOS IN LAB ANIMALS HAS ALSO CAUSED LIVER ABNORM &
DMG TO KIDNEYS, LUNGS & S PLEEN. INTENTIONAL MISUSE BY DELIBERATELY
CONC & INHALING CONTENTS MAY BE HARMFUL/FATAL.
Medical Cond Aggravated by Exposure:CAN CAUSE ALLERGIC RESPIRATORY
AND/OR SKIN REACTION.

First Aid

First Aid:INHAL:REMOVE INDIVIDUAL TO FRESH AIR. IF BRTHG IS DFCLT,
ADMIN O2. IF BRTHG IS STOPPED, GIVE ARTIF RESP & SEEK MD HELP.
EYES:FLUSH W/WATER FOR AT LEAST 15 MIN WHILE OCCASIONALLY HOLDING
EYELIDS OPEN. GET MD ATTN. INGEST:DO NOT INDUCE VOMIT(ASPIR OF
MATL INTO LUNGS CAN CAUSE CHEM PNEUM, WHICH CAN BE FATAL). KEEP
PERSON WARM, QUIET & GET MD ATTN/POIS CTL CTR. SKIN:WASH W/SOAP &
WATER OR (ING 11)

Fire Fighting

Flash Point:0F,-18C(SUPDAT)
Lower Limits:1.0%
Extinguishing Media:"ALCOHOL" FOAM, CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
.WATER SPRAY MAY BE INEFT. WATER MAY BE USED TO COOL CLSD CONTRS TO
PREVENT PRESS BUILD-UP & POSS (SUPDAT)
Unusual Fire/Explosion Hazard:CLSD CONTRS MAY EXPLODE AND/OR AUTOIGNITE
WHEN EXPOSED TO EXTREME HEAT. VAPS ARE HVR THAN AIR & MAY TRAVEL
ALONG GROUND/MAY BE MOVED BY VENT & IGNITED (SUPDAT)

Accidental Release

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. VENTILATE
AREA. ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR ABSORBENT OR OTHER
ABSORBENT MATERIAL AND TRANSFER TO A CLOSED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE IN AREAS ABOVE 120F, IN
DIRECT SUNLIGHT, NEAR OPEN FLAMES OR INCINERATE. DO NOT PUNCTURE OR
INCINERATE.
Other Precautions:STORE LARGE QUANTITIES IN BUILDING PROTECTED FOR
STORAGE OF NFPA CLASS IC FLAMMABLE LIQUID.

Exposure Controls

Respiratory Protection:FOR CASUAL/OCCUP USE:TO AVOID BRTHG VAPR/SPRAY
MISTS, OPEN WINDOWS & DOORS/USE OTHER MEANS TO ENSURE FRESH AIR
ENTRY DURING APPLICATION & DRYING. IF YOU EXPERIENCE EYE WATERING,
HDCH/DIZZ, INCREASE FR ESH AIR, WEAR NIOSH/MSHA APPRVD (ING 12)
Ventilation:FOR REGULAR/CONTINUOUS USE:PROVIDE SUFFICIENT MECH
(GENERAL) AND/OR LOC EXHAUST VENT TO MAINTAIN EXPOSURE BELOW TLV'S.
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WHERE SPECIAL/UNUSUAL CONDTNS EXIST, EXPERT
ASSIST OF AN INDUSTRIAL HYGIENIST SHOULD BE SOUGHT.
Work Hygienic Practices:WASH HANDS BEFORE USING WASHROOM. AS WITH ALL
CHEMICALS, MINIMIZE PERSONAL CONTACT AND BREATHING OF VAPORS.
Supplemental Safety and Health
EVAP RATE:PROPELLANT:<1. (BU AC = 1). FLASH PT:(PROPELLANT = 100F).
FIRE FIGHT PROC:AUTOIGNIT/EXPLOS WHEN EXPOS TO EXTREME HEAT. IF
WATER IS USED, FOG NOZZ ARE PREF. EXPLOS HAZ:BY PILOT LIGHT, OTHER
F LAMES, SPARKS, HEATERS, SMOKING, ELECT MOTORS/OTHER IGNIT SOURCES
AT LOCATIONS DISTANT FROM MATL HANDLING PT.

Chemical Properties

HCC:V3
Boiling Pt:B.P. Text:>133F,>56C
Melt/Freeze Pt:M.P/F.P Text:EST 1500F
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:<1 (H2O = 1)
Evaporation Rate & Reference:PROD >1 (SUPDAT)
Solubility in Water:SLIGHT TO MODERATE
Appearance and Odor:TYPICAL SOLVENT PAINT.
Percent Volatiles by Volume:85-90

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS AND HEAT.
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAME.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CO/CO2,
VARIOUS HYDROCARBONS, NITROGEN COMPOUNDS, ETC. WHEN BURNED.

Disposal

Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAY BE
DEPOSITED IN A POSTED TOXIC SUBSTANCE LANDFILL IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.