BPJTJ - 12-21S, AQUA SEAL
- MSDS: BPJTJ
- Manufacturer: BALL INDUSTRIES
- Product Name: 12-21S, AQUA SEAL
- National Stock Number: 6850-00N031090
Product Identification
Product ID:12-21S, AQUA SEAL
MSDS Date:08/19/1989
FSC:6850
NIIN:00N031090
MSDS Number: BPJTJ
Responsible Party
EL SEGUNDO, CA 90245
US
Emergency Phone: 213-772-4131;800-424-9300(CHEMTREC)
Info Phone: 213-772-4131
Preparer: R.S.HARDIN/A.PETISHE
Cage: 12120
Contractor
Telephone: 213-772-4131
Cage: 12120
Ingredients
PHTHALIC ACID, DIBUTYL ESTER; (DIBUTYL PHTHALATE) (SARA
CAS: 84-74-2
RTECS: TI0875000
Fraction By Weight: <2%
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
ETHYLENE GLYCOL (SARA III)
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: <2.0%
OSHA PEL 50 PPM, C
ACGIH TLV: 50 PPM VAPOR, C
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:SLIGHT IRRITANT.
SKIN:IRRITANT AFTER PROLONGED OR REPEATED CONTACT. INGEST:MAY BE
HARMFUL IF SWALLOWED. INHAL:VAPOR OR MIST CAN IRRITATE NASAL
PASSAGES; MAY CAUSE HEADACHE & NAUSEA. CHRONIC :NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:EYES:REDNESS, TEARING. SKIN:REDNESS,
IRRITATION, DRYNESS. INGEST:GI DISTURBANCES. INHAL:NAUSEA,
HEADACHE, IRRITATED NASAL PASSAGES.
Medical Cond Aggravated by Exposure:NONE KNOWN
First Aid
First Aid:EYE:FLUSH W/WATER FOR AT LEAST 15 MINUTES. IF IRRITATION
PERSISTS, GET MD. SKIN:WASH THOROUGHLY W/SOAP & WATER. IF
IRRITATION PERSISTS, GET MD. INHAL:MOVE VICTIM TO FRESH AIR. IF
SYMPTOMS PERSIST, GET MD. INGEST:DILUTE BY GIVING 2 GLASSES OF
WATER TO DRINK. GET MD. NEVER GIVE ANYTHING BY MOUTH TO UNCONSCIOUS
PERSON.
Fire Fighting
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL CAN SPLATTER ABOVE BOILING POINT
(212F). POLYMER FILM CAN BURN.
Accidental Release
Spill Release Procedures:MOP UP MATERIAL OR PICK UP W/ABSORBENT
MATERIAL. RINSE AREA W/WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST.
Protective Gloves:RUBBER OR NEOPRENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYEWASH/SAFETY SHOWER.
Work Hygienic Practices:FOLLOW ALL NORMAL HYGIENE PRACTICES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:<18 @ 20C
Spec Gravity:1.01 (H2O=1)
pH:7-7.5
Solubility in Water:DILUTABLE
Appearance and Odor:MILKY WHITE LIQUID; MILD ACRYLIC ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXTREME TEMPERATURES.
Disposal
Waste Disposal Methods:FOLLOW ALL FEDERAL, STATE & LOCAL WASTE DISPOSAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.