BPJXN - 0-1, THREADWELL CUTTING TOOLS

  • MSDS: BPJXN
  • Manufacturer: BESLY PRODUCTS CORP
  • Product Name: 0-1, THREADWELL CUTTING TOOLS
  • National Stock Number: 9510-00N031600
Product Identification

Product ID:0-1, THREADWELL CUTTING TOOLS
MSDS Date:11/01/1985
FSC:9510
NIIN:00N031600
MSDS Number: BPJXN

Responsible Party
BESLY PRODUCTS CORPORATION
100 DEARBORN AVE
SOUTH BELOIT, IL 61080
US

Emergency Phone: 815-389-2231

Info Phone: 815-389-2231

Cage: 92061

Contractor
BESLY PRODUCTS CORPORATION
SOUTH BELOIT, IL 61080 US

Telephone: 815-389-2231

Cage: 92061

Ingredients

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 0.50%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


IRON (III) OXIDE; (IRON)

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: BALANCE

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293


MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1.20%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293


CARBON BLACK; (CARBON)

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 0.94%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3


TUNGSTEN (PEL/TLV AS W, INSOLUBLE COMPOUNDS)

CAS: 7440-33-7

RTECS: YO7175000

Fraction By Weight: 0.50%

OSHA PEL 5 MG/M3;10 STEL

ACGIH TLV: 5 MG/M3;10 STEL


SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 0.30%MAX

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROD IN FORM SOLD DOES NOT CONSTITUTE
PHYSICAL HAZ/A HLTH HAZ. SUBSEQUENT OPERATIONS SUCH AS ABRADING,
MELTING, WELDING, CUTTING/PROCESSING IN ANY OTHER FASHION MAY
PRODUCE POTENTIALLY HAZ DUST/FUME W HICH CAN BE INHALED,
SWALLOWED/COME IN CNTCT W/SKIN/EYES. DETERMINE ACTUAL EXPOS BY
INDUST HYGIENE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:MONITORING. ACUTE:METALLIC TASTE;
NAUS; TIGHTNESS OF CHEST; FEVER; IRRIT OF EYES/NOSE/THROAT/SKIN.
UNCON/ DEATH DUE TO WELDING GASES/LACK OF O2. CHRONIC:NO ADVERSE
EFTS FROM PROD IN SOLID FOR M. ADVERSE EFTS MAY/MAY NOT RSLT FROM
LONG-TERM EXPOS TO DUST, FUME, GASES, ETC. BY WAY OF SUBSEQUENT
(SUPP DATA)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PRE-EXISTING
RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR, IF CONDITION CONTINUES, CONSULT
PHYSICIAN. EYE: FLUSH WELL WITH RUNNING WATER FOR AT LEAST 15 MIN
TO REMOVE PARTICULATE. GET MEDICAL ATTENTION. SKIN: BRUSH OFF
EXCESS DUST. WASH AREA WELL WITH SOAP & WATER. INGEST: SEEK
MEDICAL HELP IF LARGE QUANTITIES OF MATERIAL HAVE BEEN INGESTED.

Fire Fighting

Flash Point:NONE
Extinguishing Media:EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:THIS MATL IS POTENTIALLY CONTAM
W/COATINGS SUCH AS OILS FOR PRESERVATIVES & OTHER CONTAM.
Other Precautions:IF MATL IS CONTAM, SPECIAL PREC SUCH AS PROCESS
CONTROL & PERSONAL PROTECTIVE EQUIP APPROP TO THE NATURE OF THE
SUSPECTED CONTAM SHOULD BE TAKEN TO AVOID RESULTING EXPOS WHEN
HNDLG, CUTTING (THERMAL/ MECHANICAL) &/OR HEATING/MELTING.

Exposure Controls

Respiratory Protection:IF FUMES, MISTING OR DUST CONDITION OCCURS AND
TLV IS EXCEEDED, PROVIDE NIOSH/MSHA APPROVED RESPIRATORS.
Ventilation:GENERAL-RECOMMENDED (TO KEEP AIRBORNE CONCENTRATION OF DUST
AND FUMES BELOW ACGIH TLV'S). LOCAL AS REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS REQUIRED.
Work Hygienic Practices:USE GOOD HOUSKEEPING PRACTICES TO PREVENT
ACCUMULATIONS OF DUSTS & TO KEEP AIRBORNE DUST CONCENTRATIONS AT A
MINIMUM.
Supplemental Safety and Health
EFTS OF OVEREXP:OPERATIONS ON PROD. CHROMIUM:HIGH PULMONARY TOX &
EXPERIMENTAL CAUSE OF NEOPLASM(S), IRON:DUST CAN CAUSE
CONJUNCTIVITIS, CHOROIDITIS, RETINITIS, & SIDEROSIS OF TISSUES.
OXIDE FUME CAN CAUSE CHRONIC BRONCHITIS. MANGANESE:HIGH TOX VIA
THE INTRAPERITONEAL & INHAL ROUTES; PRLNGD EXPOS CAN CAUSE CNS
DAMAGE.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:5000F,2760C
Melt/Freeze Pt:M.P/F.P Text:2500F,1371C
Spec Gravity:7.8-8.2(H2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:VARIOUS SHAPES, SOLID, ODORLESS METAL

Stability

Stability Indicator/Materials to Avoid:YES
REACTS WITH STRONG ACIDS TO GENERATE HYDROGEN GAS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:METALLIC OXIDES.

Disposal

Waste Disposal Methods:SOLIDS: SALE AS SCRAP FOR REUSE. DUST, ETC.:
FOLLOW FEDERAL, STATE AND LOCAL REGULATIONS REGARDING DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.