BPKCL - 923, AMERCOAT THINNER

Product Identification

Product ID:923, AMERCOAT THINNER
MSDS Date:11/08/1991
FSC:8010
NIIN:00N031991
MSDS Number: BPKCL

Responsible Party
AMERON PROTECTIVE COATINGS
201 NORTH BERRY STREET
BREA, CA 92622-1020
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 714-529-1951

Preparer: H. KLINE

Cage: 0Y2E4

Contractor
AMERON PROTECTIVE COATINGS
1020 BREA, CA 92622-1020 US

Telephone: 714-529-1951

Cage: 0Y2E4

Ingredients

2-HEPTANONE;(METHYL N-AMYL KETONE)

CAS: 110-43-0

RTECS: MJ5075000

Fraction By Weight: 100.00%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:VAP, MIST &/OR DUST CAN BE HARMFUL.
IRRIT TO SKIN, MUCOUS MEMBRANES, EYE & RESP SYS. EXCESSIVE INHAL
CAN CAUSE HEADACHE, NAUSEA, DIZZINESS OR ASPHYXIATION. REPEATED &
PROLONGED OCCUPATIONAL OVEREXPOS TO SOLVENTS IS ASSOCIATED W/PERM
BRAIN & NERVOUS SYS DAM. CAN BE HARMFUL IF INHALED/ABSORBED THROUGH
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:SKIN. OVEREXPOSURE CAN DAMAGE CENTRAL
NERVOUS SYSTEM.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL:PROVIDE FRESH AIR;IF BREATHING LABORED, GIVE OXYGEN OR
ARTIFICIAL RESPIRATION. SKIN:WASH THOROUGHLY WITH SOAP AND WATER.
EYE:FLUSH IMMEDIATELY WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES
AND GE T MEDICAL ATTENTION. INGEST:DRINK 1 OR 2 GLASSES OF WATER TO
DILUTE. DO NOT INDUCE VOMITING. CONSULT PHYSICIAN OR POISON CONTROL
CENTER IMMEDIATELY. TREAT SYMPTOMATICALLY.

Fire Fighting

Flash Point Method:SCC
Flash Point:102F,39C
Lower Limits:1.00
Upper Limits:8.00
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT (FP ).
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. ISOLATE FROM HEAT, ELECTRICAL EQUIPMENT,
SPARKS AND OPEN FLAME.

Accidental Release

Spill Release Procedures:AVOID BREATHING OF VAPORS OR DUST. USE
ABSORBENT CLEANUP MATERIALS OR SWEEP UP. PLACE IN SEPARATE
CONTAINERS. KEEP OUT OF SEWERS AND WATERWAYS. IF ENTRY IS
THREATENED OR OCCURS NOTIFY LOCAL AUTHORITIE S. ELIMINATE ALL
SOURCES OF IGNITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED, UPRIGHT WHEN
NOT IN USE. STORE IN COOL, DRY, WELL-VENTILATED AREA. AVOID STORAGE
TEMPERATURES ABOVE 1OOF.
Other Precautions:DO NOT TAKE INTERNALLY. AOVID PROLONGED BREATHING OF
DUST, VAPORS OR SPRAY MIST OR CONTACT WITH SKIN AND EYES. DO NOT
WELD OR FLAME CUT AN EMPTY CONTAINER. GROUND CONTAINERS WHEN
POURING.

Exposure Controls

Respiratory Protection:NIOSH/MSHA CERTIFIED RESP FOR SPECIFIC CNDTNS
REFER TO NIOSH POCKET GUIDE TO CHEM HAZS, DHEW NO 78-210. USE
AIR-LINE RESP IN CONFINED/RESTRICTED VENT
AREAS/W/POLYMETHANE/ISOCYANATES. REFER TO 29 CFR, OSHA PARTS
1910.1915, & 1916 (SUPP DATA)
Ventilation:SUFFICIENT VENT IN VOL & PATTERN, SHOULD BE PROVIDED TO
KEEP AIR CONTAMINANT CONC BELOW TLV LIMIT. REMOVE (SUPP DATA)
Protective Gloves:NEOPRENE OR OTHER SUITABLE MATERIALS.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:FULL PROTECTIVE CLOTHING. SPARK-PROOF
EQUIPMENT.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING, SMOKING OR USING
WASHROOM. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
RESP PROT:FOR COATING OPERATIONS. VENT: WELDING OR FLAME CUTTING
DECOMPOSITION PRODUCTS. REFER TO 29 CFR, OSHA PARTS 1910.1915, AND
1916 FOR COATING OPERATIONS.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:300F,149C
Vapor Pres:4 @ 68F
Vapor Density:HVR/AIR
Spec Gravity:0.81
Evaporation Rate & Reference:0.40 (BUTYL ACETATE=1)
Appearance and Odor:LIQUID, SOLVENT ODOR.
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, ALKALIES
Stability Condition to Avoid:HEAT, OPEN FLAME, ARC OR SPARKS.
Hazardous Decomposition Products:BY FIRE, BURING OR WELDING:CO AND CO2.

Disposal

Waste Disposal Methods:IN SEPARATE, CLOSED METAL CONTAINER IN
ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE, AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.