BPKMV - NITROGEN,COMPRESSED GAS
- MSDS: BPKMV
- Manufacturer: MG INDUSTRIES
- Product Name: NITROGEN,COMPRESSED GAS
- National Stock Number: 6830-00-327-2929
Product Identification
Product ID:NITROGEN,COMPRESSED GAS
MSDS Date:10/09/1990
FSC:6830
NIIN:00-327-2929
MSDS Number: BPKMV
Responsible Party
VALLEY FORGE, PA 19482
US
Emergency Phone: 215-630-5422
Info Phone: 215-630-5422
Cage: 08772
Contractor
Telephone: 610-695-7400 / 610-695-7449
Cage: 08772
Ingredients
NITROGEN
CAS: 7727-37-9
RTECS: QW9700000
Fraction By Weight: 100.0%
ACGIH TLV: ASPHYXIANT; 9192
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: LIQUID; FROSTBITE WITH REDNESS,
BLURRED VISION. SKIN: LIQUID; FROSTBITE WITH REDNESS, PAIN,
BLISTERS. INHALATION: SIMPLE ASPHYXIANT. RAPID PULSE, DIZZINESS,
REDUCED AWARENESS, TINGLING, NAUSEA, VOMITING, UNCONSCIOUSNESS,
CONVULSIONS,DEEP COMA, DEATH. INGESTION: FROSTBITE DAMAGE OF LIPS,
MOUTH, MUCOUS MEMBRANES.
Effects of Overexposure:EYES: FROSTBITE, REDNESS. SKIN: FROSTBITE,
REDNESS, PAIN, BLISTERS. INHALATION: RAPID PULSE, DIZZINESS,
REDUCED AWARNESS, TINGLING, NAUSEA, VOMITING, UNCONSCIOUSNESS,
CONVULSIONS, DEEP COMA, DEATH. IN GESTION: FROSTBITE OF LIPS,
MOUTH, AND MUCOUS MEMBRANES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. IF FROSTBITE IS
PRESENT, WARM WATER MAY BE PREFERRED. GET MEDICAL ATTENTION. SKIN:
WARM AREA IN WARM WATER AT A TEMPERATURE OF 107F. IF WARM WATER IS
NOT AVAIL ABLE WRAP AREA IN BLANKETS. GET MEDICALATTENTION.
INHALATION: MOVE TO FRESH AIR.IF NOT BREATHING GIVE CPR. IF
BREATHING DIFFICULT GIVE OXYGEN. GET MEDICAL ATTENTION. INGESTION:
GET MEDICAL ATTENTION.
Fire Fighting
Flash Point:NONE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE. DRY
CHEMICAL, CARBON DIOXIDE. LARGE FIRES USE WATER SPRAY, FOG OR
REGULAR FOAM.
Fire Fighting Procedures:MOVE CONTAINER FROM FIRE IF POSSIBLE. APPLY
COOLING WATER TO SIDES OF CONTAINERS EXPOSED TO FLAMES UNTIL WELL
AFTER FIRE IS OUT. STAY AWAY FROM ENDS OF TANKS.
Unusual Fire/Explosion Hazard:WITHDRAW IN CASE OF RISING SOUND FROM
VENTING SAFETY DEVICE OR DISCOLORATION OF TANK. CYLINDER MAY
EXPLODE IN HEAT OF FIRE.
Accidental Release
Spill Release Procedures:STOP LEAK IF POSSIBLE. KEEP UNNECESSARY PEOPLE
AWAY. STAY UPWIND. KEEP OUT OF LOW AREAS.USE PROPER PERSONAL
PROTECTION;EVACUATE ALL PERSONNEL FROM AFFECTED AREA.CALL THE
EMERGENCY SERVICES IMMEDIATELY .
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN ACCORDANCE WITH 29 CFR
1910.101. STORE AWAY FROM INCOMPATABLE SUBSTANCES. DO NOT PERMIT
PHYSICAL DAMAGE OR OVERHEATING OF CONTAINERS.
Other Precautions:IF DAMAGED OR OVERHEATED CONTAINERS MAY VIOLENTLY
RUPTURE AND TRAVEL A CONSIDERABLE DISTANCE.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED SCBA FOR EMERGENCY USE.
Ventilation:PROVIDE GENERAL DILUTION VENTILATION.
Protective Gloves:FULL PRTECTIVE, COLD INSULATING GLOVES.
Eye Protection:GOGGLES/FACESHIELDS IF LIQUIDS INVOLVED.
Other Protective Equipment:EYE WASH STATION AND SAFETY SHOWER. SAFETY
SHOES. CONTACT LENSES SHOULD NOT BE WORN.
Work Hygienic Practices:NORMAL GOOD WORK HYGENIC PRACTICE IS ADEQUATE.
Supplemental Safety and Health
Chemical Properties
HCC:G3
Boiling Pt:B.P. Text:-321F,-196C
Melt/Freeze Pt:M.P/F.P Text:-346F,-210C
Vapor Pres:760MM-196C
Vapor Density:0.967
Spec Gravity:1.2506 G/L
Solubility in Water:1.6% @ 20C
Appearance and Odor:COLORLESS, INERT GAS.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
LITHIUM, MAGNESIUM, NEODYMIUM, OZONE, TITANIUM MAY REACT WITH NITROGEN
GAS OR LIQUID NITROGEN.
Stability Condition to Avoid:STABLE UNDER NORMAL TEMPERATURES AND
PRESSURES. AVOID EXTREME HEAT.
Hazardous Decomposition Products:THERMAL DECOMPOSITION PRODUCTS MAY
INCLUDE TOXIC OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:HAZARDOUS POLYMERIZATION HAS NOT
BEEN REPORTED TO OCCUR UNDER NORMAL TEMPERATURES AND PRESSURES.
Disposal
Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.