BPKZC - FC TONER CANON LASER PRINTER 1 & 2

  • MSDS: BPKZC
  • Manufacturer: PAR ELECTRONICS INC
  • Product Name: FC TONER CANON LASER PRINTER 1 & 2
  • National Stock Number: 6850-01-216-6823
Product Identification

Product ID:FC TONER CANON LASER PRINTER 1 & 2
MSDS Date:10/11/1991
FSC:6850
NIIN:01-216-6823
MSDS Number: BPKZC

Responsible Party
PAR ELECTRONICS INC
8980 J ROUTE 108
COLUMBIA, MD 21045
US

Emergency Phone: 410-730-4424

Info Phone: 410-730-4424/FAX -4712

Cage: 0A9B5

Contractor
PAR ELECTRONICS INC
COLUMBIA, MD 21045 US

Telephone: 410-730-4424

Cage: 0A9B5

Ingredients

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 10-15%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9293


IRON OXIDE

CAS: 1317-61-9

Fraction By Weight: 25 - 45%

Hazards

LD50 LC50 Mixture:TLV FOR CARBON BLACK IS 3.5 MG/M3.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TONER POWDER IS NOT ACCESSIBLE UNLESS
BROKEN. ACUTE- EYES:DUST MAY CAUSE IRRITATION. SKIN:LOW HAZARD FOR
INDUSTRIAL HANDLING. INHALATION:GASPING. BREATHING OF DUST MAY
CAUSE DISCOMFORT OR IRRITATION T O NASAL AND RESPIRATORY PASSAGES.
PROLONGED EXPOSURE MAY LEAD TO PULMONARY INVOLVEMENT. ORAL:UNKNOWN.
CHRONIC- UNKNOWN.
Effects of Overexposure:DUST MAY CAUSE EYE IRRITATION. BREATHING OF
DUST MAY CAUSE DISCOMFORT OR IRRITATION TO NASAL AND RESPIRATORY
PASSAGES. PROLONGED EXPOSURE MAY LEAD TO PULMONARY INVOLVEMENT.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING
RESPIRATORY DISEASES MAY BE MORE SUSCEPTIBLE TO THE EFFECTS OF THE
SUBSTANCE.

First Aid

First Aid:GET MEDICAL ATTENTION IF SYMPTOMS PERSIST. INHALATION:REMOVE
TO FRESH AIR. EYES:IMMEDIATELY FLUSH WITH WATER FOR 15 MINUTES
HOLDING EYELIDS OPEN. SKIN:WASH WITH SOAP AND WATER. INGESTION:IF
CONSCIOUS, DRINK TWO GLASSES OF MILK OR WATER ANDCONTACT A
PHYSICIAN OR POISON CONTROL CENTER.

Fire Fighting

Extinguishing Media:WATER, FOAM OR DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:AS WITH ALL ORGANIC DUSTS, THIS PRODUCT
MAY PRESENT AN EXPLOSION HAZARD IF HIGH DUST CONCENTRATIONS AND A
SOURCE OF IGNITION ARE PRESENT.

Accidental Release

Spill Release Procedures:NORMAL CLEAN UP PROCEDURES. DO NOT RAISE DUST.
SPRAY SPILL WITH WATER IF NECESSARY.
Neutralizing Agent:NOT APPLICABLE.

Handling

Handling and Storage Precautions:STORAGE- KEEP CONTAINER TIGHTLY
CLOSED. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:DO NOT STORE NEAR STRONG OXIDIZING AGENTS. DO NOT
RAISE DUST. AVOID CONTACT WITH EYES AND SKIN. AVOID BREATHING DUST.
WASH THOROUGHLY BEFORE EATING OR DRINKING.

Exposure Controls

Respiratory Protection:NONE NORMALLY REQUIRED. IF WORKPLACE EXPOSURE
LIMIT IS EXCEEDED, A NIOSH APPROVED AIR SUPPLIED RESPIRATOR OR
PROTECTIVE FILTER MASK IS ADVISED.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL) VENTILATION TO
MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:RECOMMENDED
Eye Protection:TIGHT FITTING SAFETY GOGGLES
Other Protective Equipment:EYE WASH STATION, EMERGENCY SHOWER, NORMAL
WORK CLOTHING COVERING ARMS AND LEGS
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health

Chemical Properties

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:185F,85C
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK POWDER - SLIGHT ODOR
Percent Volatiles by Volume:NONE

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:FIRE
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE AND
CARBON PARTICLES. COMBUSTION PRODUCTS ARE TOXIC; AVOID.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE
AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.