BPMDF - ELECTRODE PHOS BRONZE C
- MSDS: BPMDF
- Manufacturer: NATIONAL WELDING ALLOYS INC
- Product Name: ELECTRODE PHOS BRONZE C
- National Stock Number: 3439-00-262-4267
Product Identification
Product ID:ELECTRODE PHOS BRONZE C
MSDS Date:08/01/1990
FSC:3439
NIIN:00-262-4267
MSDS Number: BPMDF
Responsible Party
PITTSBURGH, PA 15215
US
Emergency Phone: 412-781-4255
Info Phone: 412-781-4255
Cage: 0ACE2
Contractor
Telephone: 412-781-4255
Cage: 0ACE2
Ingredients
PHOSPHORUS, AMORPHOUS, RED
CAS: 7723-14-0
RTECS: TH3495000
Fraction By Weight: .05-.35%
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
ALUMINUM (SARA III)
CAS: 7429-90-5
RTECS: BD0330000
Fraction By Weight: 0.01%
OSHA PEL 15MG/M3 DUST/5 FUME
ACGIH TLV: 10MG/M3 DUST; 9192
TIN
CAS: 7440-31-5
RTECS: XP7320000
Fraction By Weight: 7-9%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3; 9192
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: BALENCE
OSHA PEL 0.1MG/M3 FUME/1 DUST
ACGIH TLV: 0.2MG/M3 FUME; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SHORT TERM EXPOSURE TO WELDING FUMES,
GASES OR DUST MAY RESULT IN DISCOMFORT SUCH AS DIZZINESS, NAUSEA,
FEVER, DRYNESS AND/OR IRRITATION OF NOSE, THROAT AND EYES. SKIN
SENSITIVITY MAY ALSO BE NOTED. A CUTE EXPOSURE FROM SOME TOXIC
GASES MAYCAUSE PULMONARY EDEMA, ASPHYXIATION AND EXCESSIVE EXPOSURE
CAN BE FATAL.
Explanation of Carcinogenicity:NONE OF THE ALLOY CONSTITUENTS IS LISTED
AS A CARCINOGEN.
Effects of Overexposure:EXPOSURE TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS DIZZINESS, NAUSEA, FEVER, DRYNESS AND/OR
IRRITATION OF NOSE, THROAT AND EYES. SKIN SENSITIVITY MAY ALSO BE
NOTED. WATERY EYES, HEADACHE, BREA THING DIFFICULTY, FREQUENT
COUGHING AND/OR CHEST PAINS MAY OCCUR FROM ACUTE EXPOSURE. TOXIC
GASES CAN BE FATAL.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH IMPAIRED PULMONARY
FUNCTION OR ILLNESS MAY HAVE SYMPTOMS EXACERBATED BY IRRITANTS
CONTAINED IN WELDING FUMES.
First Aid
First Aid:REMOVE FROM DUST OR FUME EXPOSURE. IF BREATHING HAS STOPPED
GIVE ARTIFICIAL RESPIRATION AND GET MEDICAL ATTENTION. HMIS:TREAT
THERMAL BURNS WITH NORMAL FIRST AID FOR BURNS. TREAT RADIATION
BURNS AS SUN BURN.
Fire Fighting
Flash Point:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:ALLOY IS NON FLAMMABLE. EXTINGUISH FIRE WITH MEDIA
APPROPRIATE FOR SOURCE OF FIRE.
Fire Fighting Procedures:IF THIS MATERIAL IS REDUCED TO A POWDER
CAUTION MUST E USED TO PREVENT FIRE AND EXPLOSION. TO EXTINGUISH A
METAL POWDER FIRE, USE A CLASS D EXTINGUISHING AGENT
Unusual Fire/Explosion Hazard:NO UNUSUAL FIRE OR EXPLOSION HAZARDS ARE
ASSOCIATED WITH THIS MATERIAL.
Accidental Release
Spill Release Procedures:SUPPLIER SAID "NOT APPLICABLE" TO THE SPILL
SECTION.
Neutralizing Agent:SUPPLIER SAID "NOT APPLICABLE" TO THE SPILL SECTION.
Handling
Handling and Storage Precautions:READ AND UNDERSTAND MANUFACTURER'S
INSTRUCTIONS AND THE PRECCAUTIONARY LABEL ON THE PRODUCT.
Other Precautions:SEE ANSI STANDARD Z49.1 FOR MORE DETAILED
INFORMATION. TRAIN WELDERS TO KEEP HIS OUT OF THE FUMES. USE
EXHAUST SYSTEM TO CLEAR WELDING FUMES.
Exposure Controls
Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN BRAZING, SOLDERING OR WELDING IN A CONFINED SPACE
OR WHERE LOCAL EXHAUST OR GENERAL VENTILATION DOES NOT KEEP
EXPOSURE BELOW PEL, TLV OR STEL.
Ventilation:USE ENOUGH VENTILATION,LOCAL EXHAUST AT THE ARC OR BOTH TO
KEEP THE DUST, FUMES & GASES FROM THE WORKERS BREATHING ZONE
Protective Gloves:WELDERS LEATHER GLOVES
Eye Protection:WELDER'S HELMET WITH ANSI LENS
Other Protective Equipment:WEAR HEAD AND BODY PROTECTION WHICH HELP
PREVENT INJURY FROM RADIATION, SPARKS, FLAME AND ELECTRICAL SHOCK.
Work Hygienic Practices:MFR: ? HMIS:USE GOOD INDUSTRIAL HYGIENE
PRACTICE. AVOID UNNECESSARY CONTACT. WASH THOROUGHLY BEFORE EATING
OR DRINKING.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:N1
NRC/State Lic Num:NONE
Spec Gravity:UNKNOWNROX.
Solubility in Water:NEGLIGIBLE
Appearance and Odor:METALLIC WIRE, ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS AND/OR MINERAL ACIDS WHICH WOULD PRODUCT
FLAMMABLE HYDROGEN GAS.
Stability Condition to Avoid:SUPPLIER DID NOT ADDRESS THIS FIELD.
Hazardous Decomposition Products:VARRIOUS ELEMENTAL METALS AND METAL
OXIDES DEPENDING ON COMPOSITION OF MATERIAL.
Conditions to Avoid Polymerization:WILL NOT OCCUR
Disposal
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCAARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER I/A/W FEDERAL, STATE
& LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.