BPMMF - FORMALDEHYDE

  • MSDS: BPMMF
  • Manufacturer: MALLINCKRODT INC
  • Product Name: FORMALDEHYDE
  • National Stock Number: 6505-01-275-7677
Product Identification

Product ID:FORMALDEHYDE
MSDS Date:10/15/1986
FSC:6505
NIIN:01-275-7677
MSDS Number: BPMMF

Responsible Party
MALLINCKRODT INC
PARIS, KY 43061
US

Emergency Phone: 314-982-5000

Info Phone: 314-982-5000

Cage: 62910

Contractor
MALLINCKRODT SPECIALTY CHEMICALS CO
PHILLIPSBURG, NJ 08865 US

Telephone: 908-859-2151

Cage: 62910

Ingredients

FORMALDEHYDE

CAS: 50-00-0

RTECS: LP8925000

Fraction By Weight: 37%

OSHA PEL SEE 1910.1048

ACGIH TLV: C 0.3 PPM; A2; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


140F, 60C (10%)

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: 10-15%

OSHA PEL S,200PPM/250STEL

ACGIH TLV: S,200PPM/250STEL; 93

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


HYPERSENSITIVITY LEADING TO CONT DERM.

RTECS: 9999999ZZ


IN SOME PEOPLE. VISION IMPAIRMENT & ENLARGEMENT OF

RTECS: 9999999ZZ


HAZ BASED ON TESTS W/LAB ANIMALS. EXPOS MAY CREATE

RTECS: 9999999ZZ


WASH W/PLENTY OF

RTECS: 9999999ZZ


& DISPOSED AS HAZ WASTE IN RCRA APPRVD

RTECS: 9999999ZZ


RCRA APPROVED CHEM INCIN EQUIPPED W/AN AFTERBURNER.

RTECS: 9999999ZZ


USE ONLY W/ADEQ VENT.

RTECS: 9999999ZZ


GENERALLY PREF BECAUSE IT CAN CTL EMISSIONS OF CONTAM

RTECS: 9999999ZZ


WORK AREA. PLEASE REFER TO ACGIH DOCUMENT, "INDUST

RTECS: 9999999ZZ


FOR DETAILS.

RTECS: 9999999ZZ


FACILITIES IN WORK AREA.

RTECS: 9999999ZZ


OUTER CLTHG, CHANGE TO CLEAN GARMENTS @ END

RTECS: 9999999ZZ


HANDS BEFORE EATING & DO NOT EAT, DRINK, OR SMOKE

RTECS: 9999999ZZ


WORKING WITH THIS MATERIAL.

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:LD50:(ORAL,RAT)800 MG/KG-ING 1
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:INHAL: MAY CAUSE SORE THROAT,
COUGHING, & SHORTNESS OF BREATH. CAUSES IRRITATION TO RESPIRATORY
TRACT. MAY BE FATAL IN HIGH CONCENTRATIONS. INGEST: CAN CAUSE SEV
ABDOM PAIN, VIOLENT HDCH, & DIARR. LAR GER DOSES MAY PRDCE DECR
BODY TEMP, PAIN IN DIGESTIVE TRACT, SHALLOW RESPIRATION, WEAK IRREG
PULSE, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:FORMALDEHYDE: GROUP 2(NTP), GROUP
2A(IARC) OSHA REGULATED.
Effects of Overexposure:HLTH HAZ:UNCON & DEATH. METHANOL COMPONENT
AFFECTS OPTIC NERVE & MAY CAUSE BLINDNESS. SKIN:TOX. MAY CAUSE
IRRIT TO SKIN W/RED, PAIN, & POSS BURNS. SKIN ABSORP MAY OCCUR
W/SYMP PARALLELING THOSE FROM I NGEST. EYE:VAP CAUSE IRRIT TO EYES
W/RED, PAIN & BLURRED VISION. HIGHER CONC/SPLASHES MAY CAUSE
IRREVERSIBLE (SUPP DATA)
Medical Cond Aggravated by Exposure:PERSONS W/PRE-EXISTING SKIN
DISORDERS/EYE PROBLEMS, OR IMPAIRED LIVER, KIDNEY OR RESPIRATORY
FUNCTION MAY BE MORE SUSCEPTIBLE TO THE EFFECTS OF THE SUBSTANCE.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG GIVE ARTF RESP. IF
BRTHG IS DFCLT, GIVE O*2. CALL PHYS. INGEST:INDUCE VOMIT IMMED BY
GIVING 2 GLASSES OF H*2O & STICKING FINGER DOWN THROAT. NEVER GIVE
ANYTHING BY MOUTH TO AN UNCON PERSON. CALL PHYSIMMED. SKIN:IMMED
FLUSH W/PLENTY OF H*2O FOR @ LST 15 MIN WHILE REMOVING CONTAMD
CLTHG & SHOES. WASH CLTHG BEFORE REUSE. THORO CLEAN SHOES BEFORE
REUSE. (ING 6)

Fire Fighting

Flash Point:ING 2
Lower Limits:7.0%
Upper Limits:73%
Extinguishing Media:H*2O SPRAY CAN BE USED TO EXTING FIRES & COOL
FIRE-EXPOS CONTR. H*2O SPRAY MAY BE USED TO KEEP FIRE EXPOSED CONTR
COOL.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. H*2O
MAY BE USED TO FLUSH SPILLS AWAY FROM EXPOSURES & TO DILUTE SPILLS
TO NON-FLAMMABLE MIXTURES.
Unusual Fire/Explosion Hazard:ABOVE FLASH POINT, VAPOR-AIR MIXTURES ARE
EXPLOSIVE WITHIN FLAMMABLE LIMITS NOTED ABOVE.

Accidental Release

Spill Release Procedures:VENT AREA OF LEAK/SPILL. REMOVE ALL SOURCES OF
IGNIT. CLEAN-UP PERS REQ PROT CLTHG & NIOSH/MSHA APPRVD RESP PROT
FROM VAP. ONLY SPECIALLY TRAINED/QUALIFIED PERS SHOULD HNDLE EMER.
DO NOT FLUSH TO SEWE R/SURF H*2O. CAN BE ABSORBED ON INERT MATL
(ING 7)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP IN TIGHTLY CLSD CONTR. PROTECT
AGAINST PHYS DAM. OUTSIDE/DETACHED STOR IS PREF. INSIDE STOR SHOULD
BE IN STD FLAMM LIQ STOR ROOM/CABINET.
Other Precautions:SEPARATE FROM OXIDIZING MATL. STOR & USE AREAS SHOULD
BE NO SMOKING AREAS. WEAR SPECICAL PROT EQUIP FOR MAINT BREAK-IN OR
WHERE EXPOS MAY EXCEED ESTABLISHED EXPOS LEVELS. KEEP AWAY FROM
HEAT/SPARKS/OP EN FLAME. AVOID BRTHG VAP. (ING 9)

Exposure Controls

Respiratory Protection:IF TLV IS EXCEEDED, WEAR A NIOSH/MSHA APPROVED
SUPPLIED AIR, FULL-FACEPIECE RESPIRATOR, AIRLINED HOOD, OR SCBA.
Ventilation:SYS OF LOC &/OR GEN EXHAUST IS RECOM TO KEEP EMPLOYEE EXPOS
BELOW AIRBORNE EXPOS LIM. LOC EXHAUST VENT IS (ING 10)
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEM WORK GOG/FULL LENGTH FSHLD .
Other Protective Equipment:IMPERVIOUS CLTHG: BOOTS, LAB COAT,
APRON/COVERALLS TO PVNT SKIN CONT. MAINTAIN EYE WASH FOUNTAIN &
QUICK-DRENCH (ING 13)
Work Hygienic Practices:WASH THORO AFTER HNDLG. WASH HANDS, FACE,
FOREARMS & NECK WHEN EXITING RESTRICTED AREAS. SHOWER, DISPOSE OF
(ING 14)
Supplemental Safety and Health
MATL TO AVOID: VIOLENTLY W/PERCHLORIC ACID, PERCHLORIC ACID-ANILINE
MIXT, & NITROMETHANE. RXN W/HYDROCHLORIC ACID MAY FORM
BIS-CHLOROMETHYL ETHER, AN OSHA REGULATED CARCIN. CNDTNS (POLYM):
FORMING PAR AFORMALDEHYDE, A WHITE SOLID. EFTS OF OVEREXP: EYE DAM.
CHRONIC: FREQ/PRLNG EXPOS TO FORMALDEHYDE MAY CAUSE (ING 3)

Chemical Properties

Boiling Pt:B.P. Text:205F,96C
Melt/Freeze Pt:M.P/F.P Text:5F, -15C
Vapor Density:1.04
Spec Gravity:1.08(H*2O=1)
Solubility in Water:INFINITE
Appearance and Odor:CLEAR, COLORLESS LIQUID, PUNGENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
INCOMPATIBLE W/OXIDIZING AGENTS & ALKALIES. REACTS EXPLOS W/NITROGEN
DIOXIDE @ CA. 180C(356F). REACTS (SUPP DATA)
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:IF INVOLVED IN FIRE, IRRITATING
GASEOUS FORMALDEHYDE & CO MAY BE RELEASED.
Conditions to Avoid Polymerization:TRIOXYMETHYLENE PRECIPITATE CAN BE
FORMED ON LONG STAND @ VERY LOW TEMP. NONHAZ POLYM MAY OCCUR @ LOW
TEMP, (SUPP DATA)

Disposal

Waste Disposal Methods:ENSURE COMPLIANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.