BPNDP - 333, SATIN BLACK ENAMEL
- MSDS: BPNDP
- Manufacturer: SINCLAIR PAINT CO
- Product Name: 333, SATIN BLACK ENAMEL
- National Stock Number: 8010-00N032634
Product Identification
Product ID:333, SATIN BLACK ENAMEL
MSDS Date:10/04/1989
FSC:8010
NIIN:00N032634
MSDS Number: BPNDP
Responsible Party
LOS ANGELES, CA 90040
US
Emergency Phone: 213-664-2121
Info Phone: 213-888-8888
Preparer: J.G. PRINZ
Cage: SNCLA
Contractor
Telephone: 213-664-2121
Cage: SNCLA
Ingredients
SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (ALIPHATIC
CAS: 64742-88-7
Fraction By Weight: 45%
OSHA PEL 500 PPM (MFR)
ACGIH TLV: 100 PPM (MFR)
SILICA, CRYSTALLINE-QUARTZ
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: 4.39%
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
4.45 LB/GL (534 G/L)
RTECS: 9999999VO
4.45 LB/GL (534 G/L)
RTECS: 9999999VO
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:CAN CAUSE SEV IRRIT, RED,
TEAR, & BLURRED VISION. SKIN: CAN CAUSE MOD IRRIT, DEFAT, & DERM.
INHAL: CAN CAUSE NASAL & RESP IRRIT. ASPIR INTO LUNGS CAN CAUSE
CHEM PENUM WHICH CAN BE FATAL. CH RONIC: PRLNG/RPTD EXPOS ABOVE TLV
MAY RSLT IN PERM BRAIN & NERV SYS DAM. INHAL:EXCESS INHAL OF VAPS
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA CRYSTALLINE (QUARTZ): ANTICIPATED
CARCIN (NTP), GROUP 2A(IARC).
Effects of Overexposure:HLTH HAZ: CAN CAUSE NASAL & RESP IRRIT, WEAK,
DIZZ, FATG, NAUS, HDCH & POSS UNCON & EVEN ASPHY. SKIN: PRLNG/RPTD
CONT MAY CAUSE MOD IRRIT, DEFAT, DERM. EYE: CAN CAUSE SEV IRRIT,
RED, TEARING & BLURRED VISION. SKIN ABSORP:ORG SOLV ARE EASILY
ABSORBED; DRY OF SKIN, RED/DERM ARE SIGNS OF RPTD/OVEREXP TO THEIR
(SUPP DATA)
Medical Cond Aggravated by Exposure:NONE KNOWN.
First Aid
First Aid:EYES: FLUSH IMMED W/LG AMTS OF H*2O FOR @ LST 15 MIN. TAKE TO
PHYS FOR MED TRTMT. SKIN: WASH AFFECTED AREAS W/SOAP H*2O. REMOVE
CONTAMD CLOTHING. CONSULT PHYSICIAN IF IRRITATION PERSISTS. INHAL:
REMOV E TO FRESH AIR. RESTORE BREATHING. TREAT SYMPTOMATICALLY.
CONSULT PHYSICIAN. INGEST: DRINK 1-2 GLASSES OF WATER TO DILUTE. DO
NOT INDUCE VOMIT. CONSULT PHYS/POIS CTL CTR IMMED. TREAT
SYMPTOMATICALLY.
Fire Fighting
Flash Point Method:TCC
Flash Point:100F,38C
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:FOAM, ALCOHOL, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
FIGHT AS VOLAT LIQ FIRE. CLSD CONTR MAY EXPLODE WHEN EXPOSED TO
EXTREME HEAT-KEEP AWAY FROM AREAS EXPOS TO FIRE.
Unusual Fire/Explosion Hazard:AVOID APPLICATN IN AREAS OF PILOT
LIGHTS/SPARKS/OTHER IGNIT SOURCES AS VAPS MAY ACCUMULATE ON FLOOR &
IGNITE. KEEP CONTRS CLSD TIGHTLY & STORE IN A (SUPP DATA)
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. DIKE, CONTAIN,
OR ABSORB WITH INERT MATERIALS (SAND, VERMICULITE, ETC.). TRANSFER
TO CONTAINERS FOR RECOVERY OR DISPOSAL. PREVENT RUNOFF INTO SEWERS,
STREAMS, OR OTHER BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE OR USE NEAR SOURCES OF
HIGH TEMPERATURES, NEAR FIRE OR OPEN FLAME, OR OTHER IGNITION
SOURCES.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED OR REPEATED
EXPOSURE TO LEVELS ABOVE TLV.
Exposure Controls
Respiratory Protection:IF TLV IS EXCEEDED USE NIOSH/MSHA APPROVED
ORGANIC VAPORS AND MIST, SUPPLIED AIR/SCBA.
Ventilation:USE ADEQUATE MECHANICAL (GENERAL AND/OR LOCAL) VENTILATION
TO MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:RESISTANT GLOVES SUCH AS NITRILE RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USE IMPERVIOUS CLOTHING. EYEWASH STATION.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING RESTROOMS.
REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
EXPLO HAZ: COOL PLACE WHEN NOT IN USE. EFTS OF OVEREXP: DEFATTING
ACTION. INGEST: CAN CAUSE GASTROINTESTINAL IRRITATION, NAUSEA,
VOMITING AND DIARRHEA.
Chemical Properties
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:0.9(H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NONE.
Appearance and Odor:TYPICAL FOR SOLVENT BASED COATING.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT EXPOSE TO HIGH TEMPERATURES OR OPEN
IGNITION SOURCES.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS, CO*2, CO,
VARIOUS HYDROCARBONS, ETC. ON THERMAL DECOMPOSITION.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE,
OR FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.