BPNKL - TM-2202, SILICONE MOLD RELEASE

  • MSDS: BPNKL
  • Manufacturer: OSBORN MFG
  • Product Name: TM-2202, SILICONE MOLD RELEASE
  • National Stock Number: 6850-00N032864
Product Identification

Product ID:TM-2202, SILICONE MOLD RELEASE
MSDS Date:09/03/1986
FSC:6850
NIIN:00N032864
MSDS Number: BPNKL

Responsible Party
OSBORN MFG
5401 HAMILTON AVE
CLEVELAND, OH 44114
US

Emergency Phone: 216-467-4195

Info Phone: 216-361-1900

Preparer: LLOYD FLANNER

Cage: GO998

Contractor
OSBORN MFG
CLEVELAND, OH 44114 US

Telephone: 216-361-1900

Cage: GO998

Ingredients

SILICONE

Fraction By Weight: 40-50%


METHANE, DICHLORO-; (METHYLENE CHLORIDE)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 51-70%

OSHA PEL 500 PPM;1000 PPM, C

ACGIH TLV: 50 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


METHANE, DICHLORODIFLUORO- (SARA III)

CAS: 75-71-8

RTECS: PA8200000

Fraction By Weight: 45%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE DIZZINESS OR NARCOSIS IN
HIGH VAPOR CONCENTRATIONS. WILL CAUSE DEFATTING OF SKIN. EFFECTS
ARE REVERSIBLE. LONG TERM EXPOSURE (YEARS) VAPOR MAY CAUSE LUNG,
LIVER OR KIDNEY DAMAGE. INHALATION: DIFFICULTY IN BREATHING.
SKIN-REDNESS. INGESTION-VOMITING.
Explanation of Carcinogenicity:DICHLOROMETHANE:IARC GROUP 2B, NTP
ANTICIPATED CARCINOGEN, ACHIH GROUP A2.
Effects of Overexposure:CHLOROCARBON MATERIALS HAVE PRODUCED
SENSITIZATION OF MYOCARDIUM TO EPINEPHRINE IN LABORATORY ANIMALS
AND COULD HAVE A SIMILAR EFFECT IN HUMANS. ADRENOMIMETICS (E.G.,
EPINEPHRINE) MAY BE CONTRAINDICAT ED EXCEPT FOR LIFE-SUSTAINING
USES IN HUMANS ACUTELY OR CHRONICALLY EXPOSED TO CHLOROCARBONS .
Medical Cond Aggravated by Exposure:HEART DISEASE

First Aid

First Aid:INHAL:GIVE OXYGEN. INGEST:DO NOT INDUCE VOMTING. GASTRIC
LAVAGE. EYE:WASH EYES WITH WATER FOR AT LEAST 15 MINUTES. SKIN:WASH
SKIN WITH WATER.

Fire Fighting

Flash Point Method:TCC
Flash Point:-40F,-40C
Lower Limits:1.8
Upper Limits:12.0
Extinguishing Media:USE WATER FOG, DRY CHEMICAL OR CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED PRESSURE DEMAND SCBA
AND FULL PROTECTIVE EQUIPMENT . AEROSOL CANS MAY RUPTURE WHEN
HEATED.
Unusual Fire/Explosion Hazard:HEATED CANS MAY BURST. THERMAL
DECOMPOSITION PRODUCTS MAY INCLUDE HCL & PHOSGENE (PF N).

Accidental Release

Spill Release Procedures:USE ABSORBENT SWEEPING COMPOUND TO SOAK UP
MATERIAL. PUT INTO CONTAINER. DISPOSE AS HAZARDOUS WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, OR OPEN
FLAME. STORE AT TEMPERATURES BELOW 120F.
Other Precautions:NO SMOKING IN AREA OF USE. DO NOT USE IN THE GENERAL
VICINITY OF ARC WELDING, OPEN FLAMES OR HOT SURFACES. HEAT AND/OR
UV RADIATION MAY CAUSE THE FORMATION OF HCL AND/OR PHOSGENE .

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED SCBA IF ABOVE TLV LIMIT
EXCEEDING.
Ventilation:LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LONG SLEEVE AND LONG PANTS.
Work Hygienic Practices:DO NOT SMOKE WHILE SPRAYING; WASH HANDS AFTER
USE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:V3
Boiling Pt:B.P. Text:>-21F,>-29C
Vapor Pres:37
Vapor Density:4.0
Spec Gravity:1.1 (H2O=1)
Evaporation Rate & Reference:6.0 (BUTYL ACETATE=1)
Solubility in Water:NONE
Appearance and Odor:CLEAR-SOLVENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:IN FIRE WILL DECOMPOSE TO PHOSGENE AND
ACID. HCL .

Disposal

Waste Disposal Methods:DISPOSE AS HAZARDOUS WASTE IN ACCORDANCE WITH
EPA RCRA. DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL
REGULATION .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.