BPNKM - 67684, ACRYLOID 155 OIL ADDITIVE
- MSDS: BPNKM
- Manufacturer: ROHM AND HAAS CO
- Product Name: 67684, ACRYLOID 155 OIL ADDITIVE
- National Stock Number: 9150-00N032866
Product Identification
Product ID:67684, ACRYLOID 155 OIL ADDITIVE
MSDS Date:12/19/1990
FSC:9150
NIIN:00N032866
MSDS Number: BPNKM
Responsible Party
PHILADELPHIA, PA 19105
US
Emergency Phone: 215-592-3000;800-424-9300(CHEMTREC)
Info Phone: 215-592-3000
Cage: GO264
Contractor
Telephone: 215-592-2521/215-592-3000
Cage: 77902
Ingredients
ACRYLIC COPOLYMER
CAS: 25608-33-7
Fraction By Weight: 59-67%
MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)
CAS: 64742-65-0
RTECS: PY8035501
Fraction By Weight: 33-41%
OSHA PEL 5 MG/M3;10 STEL(MFR)
ACGIH TLV: 5 MG/M3;10 STEL(MFR)
MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)
CAS: 64742-54-7
RTECS: PY8035500
Fraction By Weight: 33-42%
OSHA PEL 5 MG/M3;10 STEL(MFR)
ACGIH TLV: 5 MG/M3;10 STEL(MFR)
MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED
CAS: 64741-88-4
RTECS: PY8040501
Fraction By Weight: 33-41%
OSHA PEL 5 MG/M3;10 STEL(MFR)
ACGIH TLV: 5 MG/M3;10 STEL(MFR)
Hazards
LD50 LC50 Mixture:LD50: (ORAL, RAT) >5000 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:SLIGHT IRRITATION. SKIN:SLIGHT
IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:MOVE SUBJECT TO FRESH AIR. EYE: IMMEDIATELY FLUSH EYES
WITH A LARGE AMOUNT OF WATER FOR AT LEAST 15 MINUTES. SKIN:WASH
AFFECTED SKIN AREAS THOROUGHLY WITH SOAP AND WATER. CONSULT A
PHYSICIAN IF IRRITATION PERSISTS. INGEST:CALL MD IMMEDIATELY .
Fire Fighting
Flash Point Method:PMCC
Flash Point:320F,160C
Extinguishing Media:CARBON DIOXIDE-DRY CHEMICAL-WATER SPRAY
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:COMBUSTION GENERATES TOXIC FUMES OF THE
FOLLOWING:NITROGEN OXIDES-SULFUR OXIDES
Accidental Release
Spill Release Procedures:FLOOR MAY BE SLIPPERY; USE CARE TO AVOID
FALLING. CONTAIN SPILLS IMMED W/INERT MATLS (E.G. SAND, EARTH).
TRANFER LIQS/SOLID DIKING MATL TO SEPARATE SUITABLE CNTNRS FOR
RECOVERY/DISP. CAUTION:KEEP SPIL LS/CLEANING RUNOFF OUT OF
MUNICIPAL (SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:MIN REC STOR TEMP FOR MATL IS 1C/34F.
MAX REC STOR TEMP FOR MATL IS 93C/200F. LOW TEMP STOR CAN CAUSE
HNDLG PROBLEMS. VISCOSITY OF MATL WILL INCREASE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:RESP PROT PROGRAM MEETING OSHA 1910.134 AND ANSI
Z88.2 REQUIREMENTS MUST BE FOLLOWED WHENEVER WORKPLACE CNDTNS
WARRANT RESP USE. NONE REQ IF AIRBORNE CONC ARE MAINTAINED BELOW
TWA/TLV'S LISTED IN ING SECTION.
Ventilation:NONE REQUIRED UNDER NORMAL OPERATING CONDITIONS.
Protective Gloves:NITRILE
Eye Protection:CHEM WORK GOGG/FULL LENGTH FSHLD .
Other Protective Equipment:USE CHEMICALLY RESISTANT APRON OR OTHER
IMPERVIOUS CLOTHING TO AVOID PROLONGED OR REPEATED SKIN CNTCT.
EYEWASH FACILITY.
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING PROMPTLY.
Supplemental Safety and Health
SPILL PROC:SEWERS AND OPEN BODIES OF WATER. WEAR PROTECTIVE EQUIPMENT.
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:>601F,>316C
Melt/Freeze Pt:M.P/F.P Text:-4C/25F
Vapor Pres:1 @ 68F
Spec Gravity:0.91 (H2O=1)
Solubility in Water:PRACTICALLY INSOL
Appearance and Odor:CLEAR LIQUID, SWEET ODOR.
Percent Volatiles by Volume:NEG
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID TEMPERATURES ABOVE 204C/400F.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD THE
FOLLOWING:METHACRYLATE MONOMERS.
Disposal
Waste Disposal Methods:INCINERATE LIQUID AND CONTAMINATED SOLIDS IN
ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.