BPQGB - FLAMAREST 1400S COMPONENT A
- MSDS: BPQGB
- Manufacturer: TEXTRON SPECIALTY MATERIALS
- Product Name: FLAMAREST 1400S COMPONENT A
- National Stock Number: 6850-00N033331
Product Identification
Product ID:FLAMAREST 1400S COMPONENT A
MSDS Date:04/17/1992
FSC:6850
NIIN:00N033331
Kit Part:Y
MSDS Number: BPQGB
Responsible Party
LOWELL, MA 01851
US
Emergency Phone: 508-452-8961
Info Phone: 508-452-8961
Preparer: PAUL F. DURKIN
Cage: 63262
Contractor
Telephone: 508-452-8961
Cage: 63262
Ingredients
2-BUTANONE;(METHYL ETHYL KETONE) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
OSHA PEL 200 PPM;300 PPM STEL
ACGIH TLV: 200 PPM;300 PPM STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
LD50 LC50 Mixture:LD50:(ORAL RAT)273 MG/KG.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NAUSEA, LOSS OF APPETITE, A BAD TASTE,
LASSITUDE, IMPAIRMENT OF COORDINATION AND REACTION TIME.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE.
First Aid
First Aid:INHAL:MOVE TO FRESH AIR. IF BREATHING HAS STOPPED, GIVE
ARTIFICIAL RESPIRATION, CALL MD IMMEDIATELY. EYE:FLUSH WITH WATER
FOR AT LEAST 15 MINUTES. CALL MD IMMEDIATELY. SKIN:WASH WITH LARGE
AMOUNTS OF WATER.
Fire Fighting
Flash Point Method:TOC
Flash Point:22.0F,-5.6C
Lower Limits:1.81%
Upper Limits:11.57%
Extinguishing Media:CO*2 OR DRY CHEMICAL FOR SMALL FIRES, USE ALCOHOL
TYPE FOAM FOR LARGE FIRES.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. ABSORB ON
SAND, GROUND OR VERMICULITE. CAREFULLY SWEEP UP AND REMOVE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM FIRE, OPEN FLAMES OR
LIGHTS.
Other Precautions:AVOID CONTACT WITH EYES. FLAMMABLE LIQUID. AVOID
BREATHING VAPOR AND PROLONGED CONTACT WITH SKIN. USE ADEQUATE
VENTILATION.
Exposure Controls
Respiratory Protection:FOLLOW OSHA AND RESPIRATOR MANUFACTURERS
REQUIREMENTS (29 CFR 1910.134) FOR RESPIRATORY PROTECTION.
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:LOCAL AND MECHANICAL EXHAUST.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FSHLD .
Other Protective Equipment:CLEAN WORK CLOTHES (COULD INCLUDE LAB COAT,
LONG SLEEVE SHIRT, LONG PANTS, APRON).
Work Hygienic Practices:FOLLOW GOOD WORK HYGIENE, WASH HANDS BEFORE AND
AFTER WORK BREAKS.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:175F,79C
Vapor Pres:71.2
Vapor Density:2.41
Spec Gravity:0.086
Appearance and Odor:YELLOW COATING PRIMARILY PUNGENT ODOR OF MEK AND
MERCAPTAN
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAMES.
Hazardous Decomposition Products:SO*X, CO AND/OR CO*2.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.