BPQHP - KRAZY GLUE TYPE 241 (KG-824)
- MSDS: BPQHP
- Manufacturer: KRAZY GLUE INC
- Product Name: KRAZY GLUE TYPE 241 (KG-824)
- National Stock Number: 8040-00N033443
Product Identification
Product ID:KRAZY GLUE TYPE 241 (KG-824)
MSDS Date:08/01/1986
FSC:8040
NIIN:00N033443
MSDS Number: BPQHP
Responsible Party
NEW YORK, NY 10010
US
Emergency Phone: 212-807-3844
Info Phone: 212-807-3844
Cage: 61751
Contractor
Telephone: 212-807-3844
Cage: 61751
Ingredients
7085-85-0
CAS: 708-85-0
Fraction By Weight: 97%
OTHER INGREDIENTS; (OTHERS)
Fraction By Weight: 3%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: RAPID POLYMERIZATION WILL OCCUR
ON SKIN WITH HEAT. IF QUANTITY IS LARGE, SKIN BURNING MAY HAPPEN.
INHALATION: HIGH VAPOR CONCENTRATION CAN INDUCE NASAL MUCOUS,
HEADACHE, AND GIDDINESS. EYE: IRRI TATION AND LACHRYMATION WILL
OCCUR SLIGHTLY.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:MILD IRRITATION OF EYES, NOSE AND THROAT.
Medical Cond Aggravated by Exposure:INHALATION: NASAL MUCOUS, HEADACHE
AND GIDDINESS IN SOME INDIVIDUALS. EYE: LACHRYMATION, IRRITATION.
First Aid
First Aid:SKIN: WASH MATERIAL OFF SKIN WITH PLENTY OF WATER. EYE:
IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES AND
GET MEDICAL ATTENTION. INHALATION: REMOVE PERSON TO FRESH AIR, IF
COUGH OR RE SPIRATORY SYMPTOMS DEVELOP, GET MEDICALATTENTION.
INGESTION: CALL MD IMMEDIATELY .
Fire Fighting
Flash Point Method:CC
Flash Point:181F,83C
Lower Limits:1.7%
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:WEAR EYE PROTECTION, PROTECTIVE CLOTHING. WIPE
AND SOAK UP LIQUID WITH ABSORBENT LIKE RAGS IF LARGE QUANTITY IS
SPILLED. VENTILATE SPILL AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID CONTACT WITH SKIN AND EYES.
Other Precautions:AVOID STORAGE WITH PRIMERS. STORE IN DARK, COOL
PLACE.
Exposure Controls
Respiratory Protection:NOT NORMALLY NEEDED IF CONTROLS ARE ADEQUATE.
WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
CONCERN .
Ventilation:NORMAL AIR EXCHANGE.
Protective Gloves:RUBBER OR POLYETHYLENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NOT REQUIRED.
Work Hygienic Practices:NOT REQUIRED.
Supplemental Safety and Health
SOL IN H*2O: WATER CAUSES RAPID POLYMERIZATION.
Chemical Properties
Boiling Pt:B.P. Text:149F,65C
Melt/Freeze Pt:M.P/F.P Text:-22F,-30C
Vapor Pres:0.17 @ 68F
Vapor Density:4.34
Spec Gravity:1.05 (H*2O=1)
Evaporation Rate & Reference:0.15 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE. (SUPDAT)
Appearance and Odor:COLORLESS LIQUID WITH ODOR.
Stability
Stability Indicator/Materials to Avoid:NO
BASIC COMPOUND SUCH AS AMINES.
Stability Condition to Avoid:HIGH HUMIDITY, HIGH TEMPERATURE OR
ULTRAVIOLET RAY.
Hazardous Decomposition Products:WILL NOT OCCUR.
Conditions to Avoid Polymerization:CONTACT WITH BASIC COMPOUND SUCH AS
AMINES.
Disposal
Waste Disposal Methods:IMMERSE ABSORBENT IN A PAIL WATER AND DISPOSE AS
OILY RAGS. WATER WILL CAUSE INSTANT POLYMERIZATION TO AN INERT
SOLID. DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL
REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.