BPRXZ - C-10 VITON FLUOROELASTOMERS
- MSDS: BPRXZ
- Manufacturer: E I DUPONT DE NEMOURS AND CO INC
- Product Name: C-10 VITON FLUOROELASTOMERS
- National Stock Number: 6850-00F025435
Product Identification
Product ID:C-10 VITON FLUOROELASTOMERS
MSDS Date:09/01/1985
FSC:6850
NIIN:00F025435
MSDS Number: BPRXZ
Responsible Party
WILMINGTON, DE 19898
US
Emergency Phone: (800) 441-7515
Info Phone: 800-441-3637
Preparer: W C PERCIVAL
Cage: 0ERJ7
Contractor
Telephone: 800-441-7515
Cage: 0ERJ7
Ingredients
FLUORINATED SYNTHETIC RUBBER *92-3*
CAS: 9011-17-0
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: UPPER RESPIRATORY TRACT &
LUNG IRRITATION. SKIN: IRRITATION. EYES: MECHANICAL IRRITATION.
Explanation of Carcinogenicity:NONE
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: WASH W/SOAP & WATER.
EYES: FLUSH W/WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:OC
Flash Point:>204C
Extinguishing Media:WATER, CO2, FOAM, DRY CHEMICALS
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING TO PROTECT FROM HYDROGEN FLUORIDE.
Unusual Fire/Explosion Hazard:COMPOUNDING W/FINELY DIVIDED METALS SUCH
AS ALUMINUM PRESENTS EXPLOSION HAZARD.
Accidental Release
Spill Release Procedures:SWEEP UP TO PREVENT SLIPPING HAZARD.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY PLACE. KEEP
CONTAINERS TIGHTLY CLOSED TO PREVENT MOISTURE ABSORPTION &
CONTAMINATION. AVOID CONTAMINATING TOBACCO PRODUCTS.
Other Precautions:DON'T SMOKE WHILE HANDLING VITON. WEAR NEOPRENE
GLOVES WHEN HANDLING REFUSE FROM A FIRE INVOLVING VITRON.
Exposure Controls
Ventilation:LOCAL EXHAUST
Protective Gloves:NEOPRENE
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
Chemical Properties
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER GRAY TO AMBER SOLID PELLETS, CHIPS OR SHEETS
Percent Volatiles by Volume:0%
Stability
Stability Indicator/Materials to Avoid:YES
FINELY DIVIDED METALS SUCH AS ALUMINUM.
Stability Condition to Avoid:TEMPERATURES >200C
Hazardous Decomposition Products:HYDROGEN FLUORIDE & TOXIC FLUOROCARBON
OLEFINS EVOLVED >200C & DURING COMBUSTION
Disposal
Waste Disposal Methods:LANDFILL IN COMPLIANCE W/FEDERAL, STATE, & LOCAL
REGULATIONS PREFERRED. INCINERATION REQUIRES SCRUBBING OF GASEOUS
PRODUCTS TO REMOVE HYDROGEN FLUORIDE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.