BPTHS - RAPID ROOF II BASE COAT
- MSDS: BPTHS
- Manufacturer: CONKLIN CO INC
- Product Name: RAPID ROOF II BASE COAT
- National Stock Number: 5640-00N033660
Product Identification
Product ID:RAPID ROOF II BASE COAT
MSDS Date:02/09/1990
FSC:5640
NIIN:00N033660
MSDS Number: BPTHS
Responsible Party
SHAKOPEE, MN 55379
US
Emergency Phone: 800-228-5635
Info Phone: 612-445-6010
Cage: 52601
Contractor
Telephone: 612-445-6010/800-228-5635
Cage: 52601
Ingredients
ALUMINUM HYDROXIDE;(ALUMINA TRIHYDRATE). TLV AS NUISANCE
CAS: 21645-51-2
RTECS: BD0940000
Fraction By Weight: 35%
ACGIH TLV: 10MG/M3 TDUST,5RDUST
TITANIUM OXIDE;(TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 1-5%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE EYE OR SKIN IRRITATION.
SWALLOWING MAY CAUSE IRRITATION TO MOUTH, THROAT & STOMACH.
PROLONGED INHALATION AT LOW CONCENTRATION MAY CAUSE HEADACHES,
NAUSEA, AND DIZZINESS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN:WASH THORO W/SOAP & WATER, FOLLOWED BY THOROUGH RINSE
W/COOL WATER. REMOVE CONTAM CLTHG & WASH BEFORE RE-USE. IF IRRIT
CONTINUES, CNTCT POIS CTL CTR OR GET MD. EYE:IMMED FLUSH W/PLENTY
OF COOL RU NNING WATER. REMOVE CNTCT LENSES, IF APPLIC, & CONTINUE
FLUSHING FOR AT LEAST 15 MINS. IF IRRIT CONTINUES CNTCT POIS CTL
CTR OR GET MD. INHAL:MOVE TO FRESH AIR IMMED. FOR ANY INHAL
POISONING,(SUPDAT)
Fire Fighting
Flash Point:NONE
Extinguishing Media:NONE. USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:COLLECT WITH ABSORBENT MATERIAL OR MECHANICAL
DEVICE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN CLOSED CONTAINERS. SPILLED
MATERIAL MAY CAUSE FLOORS TO BECOME SLIPPERY.
Other Precautions:PREVENT SKIN EXPOSURES.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC RESPIRATOR.
Ventilation:MECHANICAL VENTILATION IS ADEQUATE.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC:IMMEDIATELY CALL POISON CONTROL CENTER OR MD FOR FURTHER
INSTRUCTION. INGEST:DILUTE WITH 1-2 CUPS OF WATER OR MILK, IF
VICTIM CAN SWALLOW. CALL MD OR POISON CONTROL CENTER IMMEDIATELY F
OR FURTHER INSTRUCTIONS.
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32F,0C
Vapor Pres:17
Spec Gravity:1.24 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE LIQUID
Percent Volatiles by Volume:9
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE.
Disposal
Waste Disposal Methods:ACCORDING TO FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.