Product ID:L-TEC 1100 ALUMINUM WIRES & RODS
MSDS Date:04/01/1988
FSC:3439
NIIN:00N034160
MSDS Number: BPWDP

L-TEC WELDING & CUTTING SYSTEMS

ASHTABULA, OH 44004
US

Emergency Phone: 216-992-1265

Info Phone: 216-992-1265

Cage: DO412

L-TEC WELDING AND CUTTING SYSTEMS

710 ASHTABULA, OH 44004 US

Telephone: 216-992-5186

Cage: 55019

15 MINUTES, SEEK ASSISTENCE FROM MD .

RTECS: 9999999ZZ

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: <6%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: <1%

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 5 MG/M3 FUME

COPPER

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: <0.50%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.2 MG/M3

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

MANGANESE

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: <1%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

10 MG/M3 TDUST; 5 MG/M3 RDUST

CAS: 7439-95-4

RTECS: OM2100000

Fraction By Weight: <6%

OSHA PEL SEE INGREDIENT NAME

ACGIH TLV: 10 MG/M3 TDUST

CHROMIUM

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: <0.10%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ZINC

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: <0.5%

OSHA PEL 5 MG/M3;10MG/M3 STEL

ACGIH TLV: 5 MG/M3;10MG/M3 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TITANIUM. PEL & TLV AS TIO*2.

CAS: 7440-32-6

RTECS: XR1700000

Fraction By Weight: <0.5%

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

15 MG/M3 TDUST; 5 MG/M3 RDUST

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: BALANCE

OSHA PEL SEE INGREDIENT NAME

ACGIH TLV: 10MG/M3 TDUST

CONSTITUENTS OF THIS PRODUCT MAY INCLUDE

RTECS: 9999999ZZ

MGO*X, CRO*X, TIO*X, AND ZNO*X.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:FUMES & GASES CAN BE DANGEROUS TO YOUR
HLTH. ACUTE: SHORT TERM OVEREXP TO WELDING FUMES MAY RSLT IN
FOLLOWING SIGNS & SYMP: DISCOMFORT SUCH AS DIZZ, NAUS/DRY/IRRIT OF
NOSE/THROAT/EYES. CHRONIC: LONG TERM OVEREXPOSURE TO WELDING FUMES
CAN LEAD TO SIDEROSIS (IRON DEPOSITS LUNG) & AFFECT PULM FUNC.
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: ARC RAYS CAN INJURE EYES & BURN SKIN.
HEAT RAYS (INFRARED RADIATION FROM FLAME OR HOT METAL) CAN INJURE
EYES.
Medical Cond Aggravated by Exposure:PRE-EXISTING MEDICAL
CONDITIONS-INDIVIDUALS WITH IMPAIRED RESPIRATORY FUNCTION MAY HAVE
SYMPTOMS WORSENED BY EXPOSURE TO WELDING FUMES.

First Aid:CALL FOR MED AID. EMPLOY FIRST AID TECH RECOM BY AMERICAN RED
CROSS. INHAL: IF BRTHG IS DFCLT, GIVE O*2. CALL PHYS. IN CASE OF
ELECTRICAL SHOCK DISCONNECT & TURN OFF POWER. IF NOT BRTHG BEGIN
ARTF RES P, PREF MOUTH-TO-MOUTH. IF NO DETECTABLE PULSE, BEGIN
EXTERNAL HEART MASSAGE. IMMED CALL PHYS. SKIN: IN CASE OF ARC BURN
CALL A PHYSICIAN. EYES:IMMED FLUSH EYES W/POTABLE WATER FOR A
MINIMUM OF(ING 12

Flash Point:NON-FLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS CAN IGNITE
COMBUSTIBLE & FLAMMABLE PRODUCTS. SEE ANSI Z49.1 "SAFETY IN WELDING
& CUTTING" FOR FIRE PREVENTION AND PROTECTION INFORMATION

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:READ & UNDERSTAND MFR'S INSTRUC & PRECAUTIONARY LBL
ON PROD. SEE AMERICAN NATL STD Z49.1, "SFTY IN WELDING & CUTTING",
PUBLISHED BY AMERICAN WELDING SOCIETY, P.O. BOX 351040, MIAMI, FL
33135; OSHA PUB LICATION 2206 (29CFR1910), (SUPP DATA)

Respiratory Protection:USE NIOSH/MSHA APPRVD RESPIRABLE FUME RESP/AIR
SUPPLIED RESP WHEN WELDING IN CONFINED SPACE OR WHERE LOCAL
EXHAUST/VENT DOES NOT KEEP EXPOS BELOW TLV. SELECT AS PER OSHA 29
CFR 1910.134.
Ventilation:USE ENOUGH VENT, LOC EXHAUST @ ARC/BOTH, TO KEEP FUMES &
GASES BELOW TLV'S IN WORKER'S BRTHG ZONE & IN GEN (SUPP DATA)
Protective Gloves:WELDER'S GLOVES.
Eye Protection:CHEM WORK GOG & WELD FSHLD W/(SUPP DATA)
Other Protective Equipment:WEAR HAND/HEAD, & BODY PROT WHICH HELP TO
PVNT INJURY FROM RADIA, SPARKS, & ELECTRICAL SHOCK. SEE ANSI
Z49.1.(SUPP DATA)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PREC: U.S. GOVT PRINTING OFFICE, WASHINGTON, D.C. 20402; &
L-TEC'S PUBLICATIONS 52-529 & 2035 FOR MORE DETAILS. VENT: AREA.
TRAIN WELDER TO KEEP HIS HEAD OUT OF FUMES. OTHER PROT EQUIP:@ A
MIN T HIS INCL ARM PROTECTORS, APRONS, HATS, SHOULDER PROT, AS WELL
AS DARK SUBSTANTIAL CLTHG. EYE PROT: TINTED LENS.

HCC:N1
Appearance and Odor:BRIGHT SOLID WIRE & RODS.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:GASEOUS REACTION PRODUCTS MAY INCLUDE
CO AND CO*2. OZONE & NO*X MAY BE FORMED BY RADIATION FROM ARC.FUME
(ING 10)

Waste Disposal Methods:DISCARD ANY PRODUCT, RESIDUE, DISPOSBLE
CONTAINER OR LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL
COMPLIANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.