BPWJL - W-P-239C
- MSDS: BPWJL
- Manufacturer: INTERNATIONAL ELECTRONIC MATERIALS CORP
- Product Name: W-P-239C
- National Stock Number: 9510-00N034653
Product Identification
Product ID:W-P-239C
MSDS Date:03/30/1990
FSC:9510
NIIN:00N034653
MSDS Number: BPWJL
Responsible Party
CLEVELAND, OH 44139
US
Emergency Phone: 216-349-1960
Info Phone: 216-349-1960
Cage: 0SNJ2
Contractor
Telephone: 216-349-1960
Cage: 0SNJ2
Ingredients
TIN
CAS: 7440-31-5
RTECS: XP7320000
Fraction By Weight: 63%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: 37%
OSHA PEL 0.05 MG/M3
ACGIH TLV: 0.15 MG/M3;DUST
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:NOTE:LEAD (CAS #7439-92-1) APPEARS ON
THE NAVY LISTING OF OCCUPATIONAL REPRODUCTIVE HAZARDS. SEEK
CONSULTATION FROM APPROPRIATE HEALTH PROFESSIONALS CONCERNING
LATEST HAZARD LIST INFORMATION AND SAFE HANDLING AND EXPOSURE REC
. ORGANIC VEHICLE MAY CAUSE EYE AND SKIN IRRITATION ON CONTACT.
(EFTS OF OVEREXPOS)
Explanation of Carcinogenicity:LEAD:GROUP 2B (IARC)
Effects of Overexposure:HLTH HAZ:NO SIGNIFICANT AMOUNT OF FUMES CAN BE
INHALED AT NORMAL SOLDERING TEMPERATURE (<300C) UNDER GOOD
VENTILATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:REMOVE FROM EXPOSURE. SUPPORT BREATHING (GIVE
OXYGEN/ARTIFICIAL RESPIRATION) . EYES:FLUSH IMMEDIATELY WITH WATER
FOR AT LEAST 15 MINUTES. SKIN:WASH WITH SOAP AND WATER. INGEST:GET
MD ATTEN TION IMMEDIATELY.
Fire Fighting
Flash Point Method:CC
Flash Point:>100F,>38C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR ALCOHOL FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . AVOID BREATHING FUMES AND SMOKE FROM FIRE.
Unusual Fire/Explosion Hazard:NONE KNOWN
Accidental Release
Spill Release Procedures:PROTECT SKIN AND EYES BY WEARING SAFETY
GLASSES AND GLOVES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:USERS SHOULD WEAR PROTECTIVE GLOVES
AND GLASSES WHEN HANDLING SOLDER PASTE. SOLDERING SHOULD BE
CONDUCTED IN GOOD VENTILATION ENVIRONMENT.
Other Precautions:STORE IN LOW TEMPERATURE AND LOW HUMIDITY AREA. KEEP
TIN AND LEAD FUME LEVELS BELOW OSHA PERMISSIBLE EXPOSURE LIMIT.
Exposure Controls
Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:OBSERVE ACGIH MANUAL "INDUSTRIAL VENTILATION"
Protective Gloves:RUBBER GLOVES
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LAB OR WORKERS COAT.
Work Hygienic Practices:WASH HANDS AFTER HANDLING PRODUCT, WEAR SAFETY
GLASSES DURING HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:F4
Melt/Freeze Pt:M.P/F.P Text:>361F,>183C
Spec Gravity:4-5.5(H*2O = 1)
Solubility in Water:SLIGHT
Appearance and Odor:PASTY AND MILD SOLVENT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND ALKALI.
Stability Condition to Avoid:CONTACT WITH STRONG ACIDS AND ALKALI.
Hazardous Decomposition Products:NOT DETERMINED.
Disposal
Waste Disposal Methods:SOLDER PASTE CONTAINS LEAD. FOLLOW LOCAL, STATE
AND FEDERAL REGULATIONS IN DISPOSAL OF SOLDER PASTE. REFER TO EPA
REGULATION 40 CFR PART 250.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.