BPWKY - PETROLEUM HYDROCARBON, SC 845 3053
- MSDS: BPWKY
- Manufacturer: WITCO
- Product Name: PETROLEUM HYDROCARBON, SC 845 3053
- National Stock Number: 9150-00N034740
Product Identification
Product ID:PETROLEUM HYDROCARBON, SC 845 3053
MSDS Date:12/01/1987
FSC:9150
NIIN:00N034740
MSDS Number: BPWKY
Responsible Party
OLATHE, KS 66061
US
Emergency Phone: 913-782-5800;800-424-9300(CHEMTREC)
Info Phone: 913-782-5800
Cage: 6Z384
Contractor
Telephone: 313-437-8161
Cage: 6Z384
Ingredients
PETROLEUM HYDROCARBON
OSHA PEL 5 MG/M3 (OIL MIST)
ACGIH TLV: 5 MG/M3 (OIL MIST)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NO DATA AVAILABLE. CHRONIC:
NONE WHEN USED WITH GOOD PERSONAL HYGIENE PRACTICES. MAY OTHERWISE
CAUSE SKIN AND EYE IRRITATION UPON PROLONGED OR REPEATED CONTACT.
WHEN TESTED ON LAB ANIMALS SKIN CANCERS DEVELOPED AFTER PROLONGED
CONTACT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: IMMEDIATELY FLUSH WITH LARGE QUANTITIES OF WATER FOR AT
LEAST 15 MINUTES AND CALL MD. SKIN: REMOVE EXCESS WITH CLOTH OR
PAPER. WASH THOROUGHLY WITH SOAP AND WATER. INHAL: REMOVE TO FRESH
AIR. IN GEST: CONTACT MD IMMEDIATELY.
Fire Fighting
Flash Point Method:COC
Flash Point:>356F,>180C
Extinguishing Media:DRY CHEMICAL OR WATERFOG OR CO*2 OR FOAM OR
SAND/EARTH.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . CLOSED CONTAINERS EXPOSED TO FIRE MAY BE
COOLED WITH WATER.
Unusual Fire/Explosion Hazard:DENSE SMOKE.
Accidental Release
Spill Release Procedures:TRANSFER BULK OF MIXTURE INTO ANOTHER
CONTAINER. ABSORB RESIDUE WITH AN INERT MATERIAL SUCH AS EARTH,
SAND, OR VERMICULITE. SWEEP UP AND DISPOSE AS SOLID WASTE I/A/W
LOCAL, STATE AND FEDERAL REGULATIO NS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:KEEP OUT OF REACH OF CHILDREN!!! AVOID PROLONGED SKIN
CONTACT WITH USED MOTOR OIL.
Exposure Controls
Respiratory Protection:NONE. NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NONE
Protective Gloves:RUBBER OR PLASTIC OIL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOG & FULL LGTH FSHLD .
Other Protective Equipment:NONE
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING.
Supplemental Safety and Health
SPEC GRAV: (WATER=1) @ ROOM TEMPERATURE 0.891.
Chemical Properties
HCC:V6
Spec Gravity:SUPP DATA
Solubility in Water:NEGLIGIBLE @ 25C
Appearance and Odor:AMBER OIL; MINERAL OIL ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS SUCH AS HYDROGEN PEROXIDE, BROMINE, AND CHROMIC ACID.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE
FROM BURNING, OXIDES OF PHOSPHOROUS FROM BURNING, OXIDES OF SULFUR,
ZINC OXIDE.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W ALL APPLICABLE FEDERAL, STATE
AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.