BPWZL - P/N NK3052-1, FLEXITALLIC GASKET
- MSDS: BPWZL
- Manufacturer: FLEXITALLIC GASKET CO INC
- Product Name: P/N NK3052-1, FLEXITALLIC GASKET
- National Stock Number: 5330-01-151-8279
Product Identification
Product ID:P/N NK3052-1, FLEXITALLIC GASKET
MSDS Date:01/01/1987
FSC:5330
NIIN:01-151-8279
MSDS Number: BPWZL
Responsible Party
PENNSAUKEN, NJ 08110
US
Emergency Phone: 609-486-4400
Info Phone: 609-486-4400
Cage: 72433
Contractor
Telephone: 718-387-4724
Cage: 66200
Ingredients
ASBESTOS, CHRYSOTILE
CAS: 12001-29-5
RTECS: CI6478500
Fraction By Weight: < 20%
OSHA PEL 0.2 FIBERS/CC
ACGIH TLV: 2 FIBERS/CC; A1;9293
NON HAZARDOUS INGREDIENTS
Fraction By Weight: BALANCE
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:ACUTE HAZARDS ARE NOT EXPECTED WITH
THIS MATERIAL, EXCEPT FOR SKIN IRRITATION DUE TO TRAUMA. CHRONIC
HAZARDS IN ORDER OF INCREASING SEVERITY ARE: ASBESTOSIS, LUNG
CANCER, & MESOTHELIOMA, ALL OF WHICH ARE DISABLING AND FATAL
DISEASES OF THELUNG. INHALATION AND INGESTION OF ASBESTOS FIBERS
MAY CAUSE CANCER OF THE BOWEL.
Explanation of Carcinogenicity:ASBESTOS IS A KNOWN HUMAN CARCINOGEN.
Effects of Overexposure:FATIGUE AND SHORTNESS OF BREATH THAT GETS WORSE
WITH TIME AND EVENTUALLY BECOMES DISABLING.
Medical Cond Aggravated by Exposure:ASTHMA, EMPHYSEMA, AND TUBERCULOSIS
ARE ALL GENERALLY AGGRAVATED BY EXPOSURE TO ASBESTOS FIBERS.
First Aid
First Aid:ASBESTOS IS CONTAINED IN GASKET AND BECOMES A THREAT WHEN
GASKET IS PHYSICALLY DAMAGED, RELEASEING ASBESTOS FIBERS.
SUPPORTIVE CARE AND TREATMENT OF TRAUMA ARE THE ONLY FIRST AID
PROCEDURES SUITABLE F OR EXPOSURE TO ASBESTOS.
Fire Fighting
Flash Point:NONFLAMMABLE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:NONFLAMMABLE. USE MEDIA SUITABLE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS.
Accidental Release
Spill Release Procedures:VACUUM THE MATERIAL WITH A HEPA FILTERED
VACUUM. THE EQUIPMENT SHALL BE USED & EMPTIED SO AS TO MINIMIZE THE
RE-ENTRY OF ASBESTOS INTO THE WORKPLACE. OTHERWISE, WET THE
MATERIAL WITH WATER & SURFACTAN T AND THEN SHOVEL OR MOP UP
CONTAMINATION.
Handling
Handling and Storage Precautions:GASKET IS NONFRIABLE & WILL NOT SHED
FIBERS IN NORMAL USE AND STORAGE. USED GASKETS SHALL BE WETTED
BEFORE, DURING & AFTER DISASSEMBLY FROM AN ENGINE.
Other Precautions:IF IT IS NECESSARY TO CUT OR IMPACT THE GASKET WHILE
INSTALLING IT, WEAR A RESPIRATOR AND PROTECTIVE CLOTHING. USED
GASKETS SHALL BE IDENTIFIED AND DISPOSED OF IN ACCORDANCE WITH ALL
LOCAL, STATE AND FEDERAL REGULATIONS.
Exposure Controls
Respiratory Protection:WEAR A NIOSH/MSHA APPROVED HEPA RESPIRATOR IF
REQUIRED. WEAR SELF-CONTAINED BREATHING APPARATUS IF REQUIRED FOR
HIGH LEVELS OF CONTAMINATES.
Ventilation:LOCAL EXHAUST SUFFICIENT TO ENTRAIN ALL PARTICULATE
EMISSIONS. HEPA FILTER REQUIRED. NO LEAKS ON PRESSURE SIDE OF FAN.
Protective Gloves:COTTON OR LEATHER
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:USE COVERALLS OR DISPOSABLE CLOTHING.
Work Hygienic Practices:WORK WET TO THE DEGREE POSSIBLE. WASH HANDS
AFTER HANDLING GASKET. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
ARRANGEMENTS SHOULD BE MADE TO REPLACE THIS GASKET WITH A SUBSTITUTE
THAT DOES NOT CONTAIN ASBESTOS.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:2.5
Evaporation Rate & Reference:NIL
Solubility in Water:NEGLIGIBLE
Appearance and Odor:ASBESTOS FILLED SPIRAL WOUND GASKET
Percent Volatiles by Volume:0 %
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
OF IGNITION
Hazardous Decomposition Products:ASBESTOS DUST
Disposal
Waste Disposal Methods:WET THE MATERIAL WITH WATER AND SURFACTANT.
PLACE IN 6 MIL THICK POLYETHYLENE PLASTIC BAG. PLACE THESE BAGS
INTO ANOTHER POLY BAG OR A SAFE PLACE UNTIL IT CAN BE SHIPPED TO AN
APPROVED DISPOSAL SITE. IDENTIFY WITH ASBESTOS CANCER WARNING
LABEL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.