BPXGZ - PHOSVER 3 POWDER PILLOWS
- MSDS: BPXGZ
- Manufacturer: BETZ LABORATORIES INC
- Product Name: PHOSVER 3 POWDER PILLOWS
- National Stock Number: 6810-01-236-8878
Product Identification
Product ID:PHOSVER 3 POWDER PILLOWS
MSDS Date:02/16/1991
FSC:6810
NIIN:01-236-8878
MSDS Number: BPXGZ
Responsible Party
TREVOSE, PA 19053
US
Emergency Phone: 800-877-1940/215-355-3300
Info Phone: 215-355-3300
Cage: 24774
Contractor
Telephone: 215-355-3300
Cage: 24774
Ingredients
POTASSIUM PYROSULFATE
CAS: 7790-62-7
SODIUM MOLYBDATE
CAS: 7631-95-0
RTECS: QA5075000
OSHA PEL 5 MG/M3 CEILING
ACGIH TLV: 5 MG/KG CEILING
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE- DANGER! CORROSIVE TO EYES & WET
SKIN. INHALATION OF DUSTS MAY CAUSE IRRITATION AND/OR BURNS TO
RESPIRATORY TRACT. SKIN CONTACT CAN CAUSE MODERATE IRRITATION TO
BURNS (DEPENDENT ON LENGTH OF EXP OSURE). INGESTION OF MATERIAL CAN
BURN MOUTH, THROAT AND STOMACH. CHRONIC- MAY CAUSE TISSUE NECROSIS.
Effects of Overexposure:DANGER! CORROSIVE TO EYES & WET SKIN.
INHALATION OF DUSTS MAY CAUSE IRRITATION AND/OR BURNS TO
RESPIRATORY TRACT. SKIN CONTACT CAN CAUSE MODERATE IRRITATION TO
BURNS (DEPENDENT ON LENGTH OF EXPOSURE). INGESTION OF MATERIAL CAN
BURN MOUTH, THROAT AND STOMACH. PROLONGED OR REPEATED CONTACT MAY
CAUSE TISSUE NECROSIS.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING SKIN
DISORDERS OR EYE PROBLEMS OR IMPAIRED RESPIRATORY FUNCTION MAY BE
MORE SUSCEPTIBLE TO THE EFFECTS OF THE SUBSTANCE.
First Aid
First Aid:GET MEDICAL CARE IN ALL CASES.EYES/SKIN:IMMEDIATELY FLUSH
WITH WATER FOR AT LEAST 15 MINUTES.KEEP EYELIDS OPEN.INHALED:REMOVE
TO FRESH AIR.PROVIDE CPR/OXYGEN IF NEEDED.ORAL:DO NOT INDUCE
VOMITING.IF C ONSCIOUS,DRINK 3-4 GLASSES OF MILK OR WATER.
Fire Fighting
Flash Point:NONE
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, FOAM OR DRY CHEMICAL
FOR SURROUNDING FIRE. USE WATER SPRAY TO COOL FIRE EXPOSED
CONTAINERS.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING AND
NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS WITH FULL
FACEPIECE OPERATED IN THE POSITIVE PRESSURE MODE.
Unusual Fire/Explosion Hazard:MAY YIELD ELEMENTAL OXIDES.
Accidental Release
Spill Release Procedures:VENTILATE AREA. USE PROTECTIVE EQUIPMENTS.
SWEEP UP OR VACUUM AND PLACE IN WASTE DISPOSAL CONTAINER. DO NOT
GENERATE DUSTS. NEUTRALIZE RESIDUE WITH SODA ASH AND FLUSH TO SEWER
WITH PLENTY OF WATER IF ALLOWED.
Neutralizing Agent:SODA ASH, LIME, SODIUM BICARBONATE
Handling
Handling and Storage Precautions:STORAGE-STORE IN TIGHTLY CLOSED
CONTAINERS AWAY FROM EXCESSIVE HEAT & STRONG BASES. DO NOT TOUCH
WITH WET SKIN.KEEP DRY.
Other Precautions:CORROSIVE. DO NOT GET IN EYES, ON SKIN, ON CLOTHING.
AVOID BREATHING DUSTS. USE WITH ADEQUATE VENTILATION. PROTECT
CONTAINERS AGAINST PHYSICAL DAMAGE. KEEP OUT OF REACH OF CHILDREN.
WASH THOROUGHLY AF TER HANDLING.
Exposure Controls
Respiratory Protection:NONE REQUIRED WHERE ADEQUATE VENTILATION
CONDITIONS EXIST. IF EXCESSIVE DUSTS PRESENT, WEAR A NIOSH-APPROVED
DUST RESPIRATOR. IF CONCENTRATION EXCEEDS CAPACITY OF RESPIRATOR,
USE SELF-CONTAINED BREATH ING APPARATUS/SUPPLIED AIR RESPIRATOR.
Ventilation:PROVIDE GENERAL VENTILATION OR LOCAL EXHAUST TO MEET OSHA
PERMISSIBLE EXPOSURE LIMITS (OSHA PEL).
Protective Gloves:NITRILE, NEOPRENE, VINYL, RUBBER
Eye Protection:AIRTIGHT CHEMICAL GOGGLES
Other Protective Equipment:WEAR RUBBER APRON AND RUBBER BOOTS. EYEWASH
AND SAFETY SHOWER SHOULD BE LOCATED NEARBY.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES.
Supplemental Safety and Health
Chemical Properties
HCC:C1
Spec Gravity:2.17
pH:1.5;5%
Solubility in Water:COMPLETE
Appearance and Odor:WHITE POWDER - ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
STRONG BASES
Stability Condition to Avoid:EXCESSIVE HEAT OR FIRE
Hazardous Decomposition Products:MAY YIELD ELEMENTAL OXIDES.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE
AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.