Product ID:#44 RESIN CORE SOLDER
MSDS Date:12/12/1988
FSC:3439
NIIN:00-095-3672
MSDS Number: BPXTT

KESTER SOLDER COMPANY DIV OF LITTON SYSTEMS INC

515 E TOUHY
DES PLAINES, IL 60018-2675
US

Emergency Phone: 708-297-1600

Info Phone: 708-297-1600

Cage: 09185

KESTER SOLDER DIVISION OF LITTON SYSTEMS, INC.

DES PLAINES, IL 60018 US

Telephone: 847-297-1600

Cage: 75297

ROSIN ACID

CAS: 8050-09-7

Fraction By Weight: 3.3%

THE FOLLOWING INGREDIENTS ARE FROM THE TIR; MANUFACTURER

RTECS: 9999999ZZ

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 61.5%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9293

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 37.53%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: 0.5%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG SB/M3; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

BISMUTH

CAS: 7440-69-9

RTECS: EB2600000

Fraction By Weight: 0.25%

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 0.08%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION OF FUMES DURING USE
MAY CVAUSE RESPIRATORY TRACT AND THROAT IRRITATION. CONTACT OR
FUMES MAY CAUSE EYE IRRITATION. CONTACT WITH SKIN MAY CAUSE
ALLERGIC REACTION. CHRONIC: NONE SPECIF IED BY MANUFACTURER.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:INHALED: COUGHING, SNEEZING, SORE THROAT,
DIZZINESS, HEADACHE. EYES: REDNESS, TEARING, BLURRED VISION. SKIN:
RASH, DISCOMFORT. INGESTED: NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH WITH LOTS OF WATER FOR 15 MINUTES. SEE DOCTOR.
SKIN: WASH WITH SOAP AND WATER. INHALED: MOVE TO FRESH AIR.
INGESTED: NONE SPECIFIED BY MANUFACTURER.

Flash Point Method:COC
Flash Point:420F,216C
Extinguishing Media:WATER, CARBON DIOXIDE, ALCOHOL FOAM, DRY CHEMICAL
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER. WEAR
SELF-CONTAINED BREATHING APPARATUS AND BUNKER GEAR.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER. HMIS: SWEEP UP
ANY SPILLED MATERIAL AND EITHER PLACE IN A CONTAINER FOR LATER
DISPOSAL OR RECYCLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT PLACE FLUX CORED SOLDER WIRE IN
A HOT SOLDER POT. THE FLUX MAY IGNITE.
Other Precautions:AVOID EYE CONTACT WITH HOT FLUX. AVOID BREATHING
SMOKE DURING SOLDERING.

Respiratory Protection:NONE NORMALLY REQUIRED.
Ventilation:USE LOCAL EXHAUST OR ADEQUATE MECHANICAL VENTILATION.
Protective Gloves:NONE NORMALLY REQUIRED.
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING.
Supplemental Safety and Health

HCC:N1
Spec Gravity:1.08
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOILD AMBER CORE INSIDE SOLDER WIRE
Percent Volatiles by Volume:4.5

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:CONTACT WITH STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:SMALL AMOUNT OF TURPINTINE, HYDROGEN
CHLORIDE,

Waste Disposal Methods:NONE SPECIFIED BY MANUFACTURER. HMIS: DISPOSE OF
IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.