BPXWW - #44 RESIN CORE SOLDER
- MSDS: BPXWW
- Manufacturer: KESTER SOLDER COMPANY DIV OF LITTON SYSTEMS INC
- Product Name: #44 RESIN CORE SOLDER
- National Stock Number: 3439-00-269-9610
Product Identification
Product ID:#44 RESIN CORE SOLDER
MSDS Date:12/12/1988
FSC:3439
NIIN:00-269-9610
MSDS Number: BPXWW
Responsible Party
DES PLAINES, IL 60018-2675
US
Emergency Phone: 800-424-9300
Info Phone: 312-699-5594
Cage: 09185
Contractor
Telephone: 847-297-1600
Cage: 75297
Ingredients
ROSIN ACID
CAS: 8050-09-7
Fraction By Weight: 95%
FLUX
Fraction By Weight: 3%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SMOKE DURING SOLDERING CAN IRRITATE
EYES ANDRESPIRATORY TRACT. ROSIN IS AN ALLERGEN-MAY CAUSE RASH,
HEADACHE OR THROAT IRRITATION IN A SENSITIVE PERSON. FLUX FUMES MAY
CAUSE PULMONARY IRRITATION AND L UNG DAMAGE.
Explanation of Carcinogenicity:MANUFACTURER STATES THAT NONE OF THE
INGREDIENTS IS LISTED AS CARCINOGENIC BY IARC, NTP OR OSHA.
Effects of Overexposure:SEE HEALTH HAZARDS
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE CONTACT: FLUSH THOROUGHLY WITH WATER AND GET MEDICAL
ATTENTION. SKIN CONTACT: WASH WITH SOAP AND WATER. INHALATION:
REMOVE TO FRESH AIR.
Fire Fighting
Flash Point Method:COC
Flash Point:420F,216C
Extinguishing Media:CARBON DIOXIDE, ALCOHOL FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:WELDING ARC AND SPARKS CAN IGNITE
COMBUSTIBLES.
Accidental Release
Spill Release Procedures:MANUFACTURER STATES NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID EYE CONTACT WITH HOT FLUX. AVOID
BREATHING SMOKE DURING SOLDERING. DO NOT PLACE FLUX CORED SOLDER
WIRE INTO A HOT SOLDER POT AS IT MAY IGNITE.
Other Precautions:ROSIN MAY DECOMPOSE DURING HEATING TO LIBERATE ABOUT
5 % TURPENTINE (TLV=100 PPM). SOME ROSIN IS CARRIED UP IN SMOKE. NO
LEAD FUMES ARE LIBERATED AT SOLDERING TEMPERATURES BELOW 1000F.
Exposure Controls
Respiratory Protection:USUALLY NOT REQUIRED.
Ventilation:USE ENOUGH VENTILATION TO REMOVE THE SMOKE FROM BREATHING
AREA.
Protective Gloves:NONE REQUIRED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING AFTER
HANDLING SOLDER WIRE.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:N1
Spec Gravity:1.O8
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOLID AMBER CORE INSIDE SOLDER WIRE
Percent Volatiles by Volume:4.5
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:NONE DESCRIBED BY THE MANUFACTURER.
Hazardous Decomposition Products:SMALL AMOUNT OF TERPENTINE. MAY EMIT
HYDROGEN CHLORIDE FUMES (<0.5% OF FLUX) DURING SOLDERING.
Disposal
Waste Disposal Methods:CONSULT YOUR LOCAL ENVIRONMENTAL OFFICER.
PREVENT WASTE FROM CONTAMINATING SURROUNDING ENVIRONMENT. DISCARD
ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER, OR LINER IN AN
ENVIRONMENTALLY ACCEPTABLE MANNER , IN FULL COMPLIANCE WITH THE
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.