Product ID:STAY SAFE 50
MSDS Date:04/01/1990
FSC:3439
NIIN:01-264-7681
MSDS Number: BPYMD

HARRIS J W CO INC

10930 DEERFIELD RD
CINCINNATI, OH 45242-4110
US

Emergency Phone: 513-891-2000/800-424-9300(CHEMTREC)

Info Phone: 513-891-2000

Cage: JO820

J. W. HARRIS CO., INC.

CINCINNATI, OH 45242-4110 US

Telephone: 513-891-2000

Cage: 27911

ZINC (SARA III)

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 4-10%

OSHA PEL 10 MG ZNO/M3

ACGIH TLV: 10 MG ZNO/M3; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: < 2%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: 4%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG SB/M3; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: < 2%

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: BALANCE

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9293

LD50 LC50 Mixture:TLV FOR SILVER IS 0.1 MG/M3
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE- TIN, ZINC & ANTIMONY FUME MAY
CAUSE METAL FUME FEVER, CHARACTERIZED BY FEVER, BODY ACHE & CHILLS.
FUMES FROM FLUX (ZINC CHLORIDE, ETC..) USED DURING SOLDERING MAY BE
IRRITATING TO RESPIRATORY TRACT. CHRONIC- PULMONARY IRRITATION.
Effects of Overexposure:TIN, ZINC & ANTIMONY FUME MAY CAUSE METAL FUME
FEVER, CHARACTERIZED BY FEVER, BODY ACHE & CHILLS. FUMES FROM FLUX
(ZINC CHLORIDE, ETC..) USED DURING SOLDERING MAY BE IRRITATING TO
RESPIRATORY TRACT.
Medical Cond Aggravated by Exposure:LUNG DISEASE

First Aid:GET MEDICAL CARE. EYES: FLUSH WITH WATER FOR 15
MINUTES,HOLDING EYELIDS OPEN. SKIN:FOR BURNS,COOL WITH COLD WATER.
INHALATION: REMOVE TO FRESH AIR. PROVIDE CPR/OXYGEN IF NEEDED.
INGESTION: GET MEDICAL HELP IF NEEDED.

Flash Point:NONE
Extinguishing Media:DRY SAND, DRY CHEMICAL. DO NOT USE WATER ON FIRE
WHERE MOLTEN METALS IS PRESENT.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING AND
NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS WITH FULL
FACEPIECE OPERATED IN THE POSITIVE PRESSURE MODE.
Unusual Fire/Explosion Hazard:SOLDER ALLOYS MAY EMIT TOXIC FUMES IN A
FIRE. OPEN FLAME AND SPARKS CAN IGNITE COMBUSTIBLES.

Spill Release Procedures:COLLECT AND USE. IF CONTAMINATED OR IN SMALL
PARTICLES, VACUUM OR COLLECT MATERIAL. NEVER USE ANY METHOD WHICH
GENERATE DUST. DO NOT USE FORCED AIR FOR CLEANING. WEAR
NIOSH-APPROVED DUST MASK IF DUSTY CONDITION.

Handling and Storage Precautions:STORAGE- KEEP AWAY FROM STRONG ACIDS.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. FOR INDUSTRIAL USE
ONLY. WASH THOROUGHLY AFTER HANDLING. DURING SOLDERING, ACTUAL
EXPOSURE SHOULD BE DETERMINED BY MONITORING THE FUME IN THE
OPERATOR'S BREATHING ZONE.

Respiratory Protection:REQUIRED IF TLV'S ARE NOT BEING MAINTAINED. USE
NIOSH APPROVED RESPIRATOR FOR EITHER ORGANIC VAPORS, DUST/FUME
(HIGH EFFICIENCY FILTERS) OR BOTH IF TLVS ARE EXCEEDED.
Ventilation:LOCAL DUST PICK UP AND VENTILATION RECOMMENDED.
Protective Gloves:HEAT RESISTANT DURING SOLDERING
Eye Protection:FACE SHIELD/GOGGLES DURING SOLDERING
Other Protective Equipment:INSTALL EYE WASH STATION.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. WASH THOROUGHLY BEFORE EATING OR DRINKING.
Supplemental Safety and Health

HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID, SILVER COLOR WIRE

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:TOXIC FUMES MAY BE FORMED UPON
SOLDERING FROM METALS, COATING ON THE METAL BEING
SOLDERED(PAINT,PLATING,GALVANIZING).

Waste Disposal Methods:NEVER DISPOSE OF IN TRASH. HOLD FOR RECYCLING OR
DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE AND
FEDERAL REGULATIONS. SELL TO A METALS RECLAIMER IF POSSIBLE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.