Product ID:PUROLITE A-850
MSDS Date:10/04/1991
FSC:6810
NIIN:00N022204
MSDS Number: BPZZR

Cage: 0A5A0

Telephone: 610-668-9090

Cage: 67168

NON HAZARDOUS INGREDIENTS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:RESIN IS A STRONGLY ALKALINE MATERIAL.
EYE CONTACT MAY CAUSE MECHANICAL IRRITATION LIKE OTHER FOREIGN
BODIES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NOT APPLICABLE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE: FLUSH THOROUGHLY FOR AT LEAST 15 MINUTES, CALL MD IF
IRRITATION PERSISTS. INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE
TO FRESH AIR. SUPPORT BREATHING (GIVE O2/ARTF RESP) . SKIN: FLU SH
WITH COPIOUS AMOUNTS OF WATER. CALL MD .

Flash Point:NO FLASH POINT
Extinguishing Media:CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:RESIN BEADS ON FLOOR WILL MECHANICALLY CAUSE
THE FLOOR TO BE SLIPPERY. SWEEP UP THOROUGHLY AND SET ASIDE FOR
RECOVERY OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP DRUMS AND PLASTIC BAG LINERS
SEALED TO PREVENT DRYING AND TO CONTAIN ODOR.
Other Precautions:STORE BELOW 49C (120F) AND ABOVE 0C (32F).

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST: NORMAL ROOM VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE
Work Hygienic Practices:CLEANLINESS IS RECOMMENDED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:50% WATER
Spec Gravity:1.09
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR SPHERICAL BEADS - AMINE ODOR.

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH CONCENTRATED NITRIC ACID, OR STRONG OXIDIZING
AGENTS.
Stability Condition to Avoid:AVOID TEMPERATURES OVER 60C (140F).
Hazardous Decomposition Products:NH3, CH3NH2 AND RELATED AMINES, CO,
CO2, ACRYLIC.

Waste Disposal Methods:EXCEPT WHERE ODOR IS OBJECTIONAL, THIS MATERIAL
CAN BE DISPOSED OF AS ORDINARY TRASH. DISPOSAL MUST BE IN
ACCORDANCE WITH FEDERAL, STATE AND FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.