Product ID:THIXON 822
MSDS Date:01/03/1991
FSC:8040
NIIN:00N023408
MSDS Number: BQBFZ

MORTON INTERNATIONAL

10 SOUTH ELECTRIC ST
WEST ALEXANDRIA, OH 45381
US

Emergency Phone: 513-839-4612;800-424-9300(CHEMTREC)

Info Phone: 513-839-4612

Preparer: J.D. BONFIGLIO

Cage: DO471

MORTON INTL INC SPECIALTY CHEMICALS GROUP

CHICAGO, IL 60606-1218 US

Telephone: 312-807-2000

Cage: 32063

VM&P NAPHTHA; (LIGROINE)

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 63%

OSHA PEL 300 PPM;400 PPM STEL

ACGIH TLV: 300 PPM

N-HEPTANE; (HEPTANE)

CAS: 142-82-5

RTECS: MI7700000

Fraction By Weight: 19%

OSHA PEL 500 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9293

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 7%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

TOLUENE

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 1%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SOLVENT SYSTEM IN THIS PRODUCT MAY
CAUSE NERVOUS SYSTEM DEPRESSION, IRREGULAR HEARTBEAT AND IMPAIRED
LUNG FUNCTION. MISUSE MAY CAUSE LIVER, KIDNEY AND BRAIN
DAMAGE.NOTE:TOLUENE CAS#108-88-3 APPEARS ON THE NAVY LISTING OF
OCCUP REPRO.SEEK CONSULTATION FROM APPROP HLTH PROFESSIONALS
CONCERN LATEST HAZ LIST INFO(SUPP DAT)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:WARNING! THIS PRODUCT IS HARMFUL IF INHALED. IT
MAY CAUSE DIZZINESS, HEADACHE, NAUSEA, AS WELL AS NOSE, THROAT,
SKIN AND EYE IRRITATION.
Medical Cond Aggravated by Exposure:SOLVENTS MAY AGGRAVATE PRE-EXISTING
HEART AND RESPIRATORY DISORDERS AS WELL AS ORGANS NAMED ABOVE.

First Aid:SKIN: FOR DIRECT CONTACT, REMOVE CLOTHING. WASH AFFECTED SKIN
WITH SOAP AND WATER. EYES: IRRIGATE EYES THOROUGHLY FOR AT LEAST 15
MIN. INHAL: IF AFFECTED PERSON IS UNCONSCIOUS, REMOVE TO FRESH AIR
AND ADMINISTER CPR OR O*2 AS INDICATED. INGEST: CALL MD IMMED .

Flash Point Method:CC
Flash Point:21.0F,-6.1C
Lower Limits:0.9%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR FOAM EXTINGUISHERS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT IN CLOSED OR CONFINED AREAS.
Unusual Fire/Explosion Hazard:MATERIAL IS CONSIDERED FIRE HAZARD DUE TO
ITS FLASH POINT, HIGH VOLATILITY AND POTENTIAL HEAVY VAPORS.

Spill Release Procedures:ELIMINATE ALL IGNIT SOURCES. ABSORB MATL
W/VERMICULITE/OTHER SUITABLE ABSORB MATL. USE APPRVD WASTE DISP
METH. UNDER EPA-CERCLA/SARA, MATL WHICH IS REL INTO ENVIRONMENT IN
AN AMT ABOVE RQ(REPORTABLE Q TY) MUST BE RPTD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP THIS MATL AWAY FROM
HEAT/SPARKS/OPEN FLAME. AVOID BREATHING VAPORS FOR PROLONGED PERIOD
OF TIME. AVOID CONTACT TO SKIN. DO NOT TAKE INTERNALLY.
Other Precautions:WHEN USING FLAMMABLE MATERIALS, GROUND CONTAINERS YOU
ARE USING TO AVOID STATIC DISCHARGE WHICH COULD IGNITE SOLVENTS
CONTAINED IN FLAMMABLE MATERIALS. DO NOT ALLOW FREE FALL OF MORE
THAN FEW INCHES W HEN POURING FLAMMABLE MATERIALS.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS, SUCH AS
SCBA OR GAS MASKS.
Ventilation:LOCAL EXHAUST:AS REQUIRED TO MAINTAIN LEVEL BELOW TLV/PEL.
MECH(GEN): AS REQUIRED TO MAINTAIN LEVEL BELOW TLV/PEL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOG OR FULL LNGTH FSHLD.
Other Protective Equipment:NOT USUALLY REQUIRED.
Work Hygienic Practices:REFRAIN FROM EATING OR SMOKING IN AREA WHERE
THIS MATERIAL IS BEING USED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER. HEALTH HAZ:AND SAFE HANDLING AND
EXPOSURE RECOMMENDATIONS .

HCC:F3
Boiling Pt:B.P. Text:200F,93C
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:83

Stability Indicator/Materials to Avoid:YES
UNKNOWN. FOLLOW THE GUIDELINES FOR DILUTION WHICH APPEAR ON THE
TECHNICAL BULLETIN.
Stability Condition to Avoid:EXPOSURE TO HIGH TEMPERATURES FOR
PROLONGED PERIOD MAY GEL THIS PRODUCT RENDERING IT USELESS.
Hazardous Decomposition Products:POTENTIAL FOR CO, CO*2.

Waste Disposal Methods:INCINERATE THIS MATERIAL EITHER AS HAZARDOUS
FLAMMABLE LIQUID WASTE OR HAZARDOUS FLAMMABLE SOLID WASTE,
DEPENDING ON PHYSICAL STATE OF THE MATERIAL. DISPOSAL MUST BE IN
ACCORDANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.