BQCCY - SUN-PROOF SEMI-GLOSS ACRYLIC LATEX HOUSE AN

  • MSDS: BQCCY
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: SUN-PROOF SEMI-GLOSS ACRYLIC LATEX HOUSE AN
  • National Stock Number: 8010-00N035082
Product Identification

Product ID:SUN-PROOF SEMI-GLOSS ACRYLIC LATEX HOUSE AN
MSDS Date:08/04/1990
FSC:8010
NIIN:00N035082
MSDS Number: BQCCY

Responsible Party
PPG INDUSTRIES INC
260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 800-441-9695;800-245-2590

Cage: 47695

Contractor
PPG INDUSTRIES INC
PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

Ingredients

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 70-75%


FILM FORMERS, RESINS, AND ADDITIVES

Fraction By Weight: 65-70%


ZINC COMPOUNDS

Fraction By Weight: 1-2%

OSHA PEL 10 MG/M3 DUST (ZNO)

ACGIH TLV: 10 MG/M3 DUST (ZNO)


INHALING MASSIVE QTYS OF TITANIUM DIOXIDE

RTECS: 9999999ZZ


W/ANIMALS INVOLVED IN MFR OF THIS PIGMENT INDICATE NO

RTECS: 9999999ZZ


TITANIUM DIOXIDE DUSTS FROM COATINGS IS VERY LIMITED.

RTECS: 9999999ZZ


HAZARD FOR MAN.PRODUCT CNTNS ETHYLENE GLYCOL WHICH

RTECS: 9999999ZZ


CAUSE BIRTH DEFECTS IN LAB ANIMALS. THE EVIDENCE OF

RTECS: 9999999ZZ


SUGGESTED EXPOS LIMITS, THE LEL BELOW STATED LIMIT,

RTECS: 9999999ZZ


CUTTING ON SURFACES COATED WITH THIS PRODUCT.

RTECS: 9999999ZZ


NFPA CLASS IIIB COMBUSTIBLE LIQUID FIRES.

RTECS: 9999999ZZ


PIGMENTS

Fraction By Weight: 5-10%


SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 2-5%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293


ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 2-5%

OSHA PEL 50 PPM,C

ACGIH TLV: 50 PPM,C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


PROPIONIC ACID, 2-METHYL-, MONOESTER WITH

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 2-5%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL OR FATAL.
EYE:IRRITATION. SKIN:SLIGHT IRRITATION. INHAL:VAP/SPRAY MIST MAY BE
HARMFUL IF INHALED. SANDING & GRINDING DUST MAY BE HARMFUL IF
INHALED. VAP GENERATED AT ELEVA TEMPS IRRITAT E EYES, NOSE, THROAT.
CHRONIC:AVOID LONG TERM & RPTD CNTCT. PROD CNTNS A FORM OF
CRYSTALLINE SILCA (EFTS OF OVEREXP)
Explanation of Carcinogenicity:CRYSTALLINE SILICA (QUARTZ): GROUP 2A
(IARC, ANTICIPATED TO BE A CARCINOGEN (NTP).
Effects of Overexposure:HLTH HAZ:WHOM IARC ASSOCIATES WITH AN INCR RISK
OF CANCER LAB ANIMALS. LONG-TERM EXPOS TO CRYSTALLINE SILICA MAY
ALSO LEAD TO A DISABLING INJURY KNOWN AS SILICOSIS. THESE EFTS ARE
ASSOC W/BRTHG EXCESS AMTS OF RESPIRABLE SILICA, SO THE POTNTL HAZ
FOR HUMANS IS LIMITED. PROD CNTNS TITANIUM DIOXIDE. ANIMALS (ING 8)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGEST:DO NOT INDUCE VOMITING. CALL MD IMMEDIATELY .
EYE:FLUSH IMMEDIATELY WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
SKIN:REMOVE PROMPTLY BY WASHING, FOLLOWED BY WATERLESS HANDL
CLEANER & SO AP & WATER. INHAL:MOVE TO FRESH AIR. APPLY ARTIFICIAL
RESPIRATION & OTHER SUPPORTIVE MEASURES AS REQ. IF ANY OF FOLLOWING
OCCUR OR FOLLOWING USE OF PROD, CALL POIS CTL CTR, EMERG ROOM OR MD
(SUPDAT)

Fire Fighting

Flash Point Method:PMCC
Extinguishing Media:NFPA CLASS B EXTINGUISHERS (CARBON DIOXIDE, DRY
CHEM OR UNIVERSAL AQ TYPE FILM FORMING FOAM) DESIGNED TO EXTING
(ING 15)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER SPRAY MAY BE INEFTIVE BUT MAY BE USED TO COOL CLSD CNTNRS
TO PVNT PRESS BUILDUP & POSS AUTO-(SUPDAT)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE/BURST (DUE
TO THE BUILDUP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERSONNEL EQUIPPED
W/PROPER RESPIRATORY PROTECTION AND EYE PROTECTION SHOULD BE
PERMITTED IN AREA. REMOVE ALL IGNIT SOURCES. TAKE UP SPILLED MATL
W/SAWDUST, VERMICULITE OR OTHER ABSORB MATL & PLACE INTO CNTNRS
FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS IIIB COMBUST LIQS.PROTECT FROM FREEZING.
Other Precautions:IF MATERIAL IS PART OF MULTIPLE COMPONENT COATING
SYSTEM, READ THE MSDS FOR OTHER COMPONENT(S) BEFORE BLENDING AS
RESULTING MIXTURE MAY HAVE HAZARDS OF ALL ITS PARTS.

Exposure Controls

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE A
NIOSH/MSHA APPROVED SUITABLE RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION OR LOC EXHST VENT IN VOLUME & PATTERN
TO KEEP CONC OF INGREDS LISTED BELOW LOWEST (ING 13)
Protective Gloves:NITRILE, NEOPRENE/RUBBER LATEX GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING OR
SHOES.
Supplemental Safety and Health
MFR PT#/TRADE NAME:TRIM PAINT KENTUCKY GREEN, 78-838. FIRE FIGHT
PROC:IGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. IF WATER USED, FOG
NOZZ PREF. HAZ DECOMP PRODS:FUME INCL:CARBON MONOXIDE/ZINC OXIDE.
FIR ST AID PROC:IMMED. HAVE MSDS AVAIL. INGEST:EXCESS EXPOS TO
CORROSIVE MATL. PERSISTENT SKIN/EYE IRRIT/BRTHG DFCLTIES.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>100F,>38C
Vapor Pres:<18
Vapor Density:HVR/AIR
Spec Gravity:1.0-1.8
Evaporation Rate & Reference:<35 (BUTYL ACETATE=1)
Solubility in Water:<74%
Appearance and Odor:VISCOUS LIQ W/ODOR CHARACT OF CHEM FAMILY & ANY
SOLVS LISTED IN INGRED SECTION

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING OR FLAME CUTTING ON SURFS COATED W/PROD
MAY PRODUCE (SUPDAT)

Disposal

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL & LOCAL ENVIRONMENTAL REGULATIONS.
EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN
APPROVED WASTE MANAGEM ENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.