Product ID:MLC ULTRASTAR SEALER, C 598 10
MSDS Date:06/01/1992
FSC:8010
NIIN:00N035164
MSDS Number: BQCFS

PRATT & LAMBERT

BUFFALO, NY 14240
US

Emergency Phone: 716-873-6000;800-255-3924

Info Phone: 716-873-6000

Preparer: CORP SFTY/ENVIRON AFFAIRS

Cage: 77359

PRATT & LAMBERT

BUFFALO, NY 14240 US

Telephone: 716-873-6000

Cage: 77359

SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC

CAS: 64742-95-6

RTECS: WF3400000

Fraction By Weight: 5%

2-PROPANOL, 1-METHOXY-; (PROPYLENE GLYCOL MONOMETHYL

CAS: 107-98-2

RTECS: UB7700000

Fraction By Weight: 5%

OSHA PEL 100 PPM;150 STEL

ACGIH TLV: 100 PPM;150 STEL

1@20C

CAS: 34590-94-8

RTECS: JM1575000

Fraction By Weight: <5%

OSHA PEL 100PPM;150PPM STEL,S

ACGIH TLV: 100PPM;150PPM STEL,S

265 G/L LESS WATER, 391 G/L

RTECS: 9999999VO

Fraction By Weight: SEE ING

PERMISSIBLE EXPOS LIMITS WHICH MAY BE LISTED IN

RTECS: 9999999ZZ

AMERICAN CONFERENCE OF GOVERNMENT INDUSTRIAL

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: UNKNOWN. INHAL: MAY
CAUSE NOSE/THROAT IRRITATION. HIGH CONCENTRATIONS MAY CAUSE ACUTE
CNS DEPRESSION CHARACTERIZED BY HDCH, DIZZ, NAUS & CONFUSION. EYE:
MAY CAUSE IRRITATION. SKIN: MAY CAUSE DEFATTING AND IRRITATION OF
SKIN.CHRONIC: RPTS HAVE ASSOC PRLNGD & RPTD OCCUP OVEREXP TO SOLV
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: W/PERMANENT BRAIN & NERVOUS SYSTEM
DAMAGE. INTENTIONAL MISUSE BY DELIB CONC & INHALING CONTENTS MAY BE
HARMFUL/FATAL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST: DO NOT INDUCE VOMIT. CALL POIS CTL CTR, HOSP EMER
ROOM/PHYS IMMED. INHAL: REMOVE TO FRESH AIR IMMED. IF BRTHG HAS
STOPPED, GIVE ARTF RESP. KEEP WARM & QUIET. GET MED ATTN IMMED.
EYE: FLUSH W/L G AMTS OF WATER, LIFTING UPPER & LOWER LIDS OCCAS.
CONTINUE FOR @ LST 15 MIN. GET MED ATTN. SKIN: REMOVE CONTAMD
CLTHG. WASH AFFECTED AREA W/SOAP/WATER. OBTAIN MED ATTN IF IRRIT
PERSISTS. (SUPP DATA)

Flash Point Method:SCC
Flash Point:200F,93C
Extinguishing Media:USE NFPA CLASS B FIRE EXTING (CARBON DIOXIDE ALL
PURPOSE DRY CHEM/ALCOHOL FOAM) DESIGNED TO EXTING FLAMM (SUPP DATA)
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
WATER MAY BE INEFTIVE, BUT MAY BE USED TO COOL EXPOS CONTRS TO PVNT
PRESS BUILD-UP & POSS AUTO-IGNIT (SUPP DATA)
Unusual Fire/Explosion Hazard:DURING EMERGENCY CNDTNS, OVEREXP TO
DECOMP PROD MAY CAUSE HLTH HAZ. SYMP MAY NOT BE IMMED APPARENT.
OBTAIN MEDICAL ATTENTION.

Spill Release Procedures:WEAR RESPIRATORS EYE, HAND, AND BODY
PROTECTION APPROPRIATE FOR THE SIZE OF SPILL AND THE EXPOSURES
ENCOUNTERED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PROTECT FROM FREEZING.
Other Precautions:DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH
USE. KEEP AWAY FROM CHILDREN.

Respiratory Protection:IF APPLIED BY SPRAYING, USE A NIOSH/MSHA APPRVD
PROPERLY FITTED RESP APPROP TO REMOVE SPRAY MIST. REFER TO OSHA
29CFR1910.134 "RESPIRATORY PROTECTION".
Ventilation:PROVIDE LOC EXHAUST VENT IN SUFFICIENT VOL & PATTERN SO AS
TO MAINTAIN EXPOS BELOW NUISANCE DUST LIM & (ING 5)
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:CHEM WORK GOG & FULL LENGTH FSHLD.
Other Protective Equipment:EYEWASH FACILITY, SAFETY SHOWER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA: LIQ FIRES.POLYMER FOAM IS PREFERRED FOR LG FIRES. FIRE
FIGHT PROC: EXPLO WHEN EXPOS TO EXTREME HEAT. IF WATER IS USED, FOG
NOZZ ARE PREF. FIRST AID PROC: NOTES TO PHYS: ANY TREATMENT THA T
MIGHT BE REQUIRED FOR OVEREXPOSURE SHOULD BE DIRECTED @ THE CTL OF
SYMPTOMS & THE CLINICAL CONDITIONS.

HCC:N1
Boiling Pt:B.P. Text:>-28F,>-33C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1
Evaporation Rate & Reference:SLOWER THAN DIETHYL ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:76

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT (>115F(46C) AND
SOURCES OF IGNITION.
Hazardous Decomposition Products:BURNING, INCL WHEN HEATED BY WELDING
OR CUTTING, WILL PRODUCE SMOKE, CARBON MONOXIDE AND CARBON DIOXIDE.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.