BQDGS - DBT

  • MSDS: BQDGS
  • Manufacturer: GE SILICONES
  • Product Name: DBT
  • National Stock Number: 8030-00-071-6915
Product Identification

Product ID:DBT
MSDS Date:10/30/1992
FSC:8030
NIIN:00-071-6915
Kit Part:Y
MSDS Number: BQDGS

Responsible Party
GE SILICONES
260 HUDSON RIVER ROAD
WATERFORD, NY 12188
US

Emergency Phone: 518-237-3330

Info Phone: 518-237-3330

Preparer: DA POLSINELLI

Cage: GESIL

Contractor
GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT
WATERFORD, NY 12188 US

Telephone: 518-237-3330/800-332-3390

Cage: 01139

Ingredients

DIBUTYLTIN DILAURATE

CAS: 77-58-7

RTECS: WH7000000

Fraction By Weight: 80-99%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1 MG/M3


VOC (EPA METH 24); 15 G/L

RTECS: 9999999VO

Hazards

LD50 LC50 Mixture:DIBUTYL TIN DILAURATE:RAT LD50:1.47MG/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL IF SWALLOWED. SKIN
CONTACT: CAUSES MODERATE SKIN IRRITATION. EYE CONTACT: CAUSES
SEVERE EYE IRRITATION. INHALATION: NONE KNOWN.
Explanation of Carcinogenicity:PRODUCT OR INGREDIENTS PRESENT .1% OR
MORE NOT LISTED AS CARCINOGEN OR SUSPECTED CARCINOGEN BY NTP, IARC
OR OSHA.
Effects of Overexposure:SUBCHRONIC (TARGET ORGAN) EFFECTS: CENTRAL
NERVOUS SYSTEM DAMAGE. CUMULATIVE SYSTEMIC TOXICITY.
Medical Cond Aggravated by Exposure:CENTRAL NERVOUS SYSTEM DISORDERS.

First Aid

First Aid:INGESTION: IF SWALLOWED INDUCE VOMITING IMMEDIATELY BY GIVING
2 GLASSES WATER & STICKING FINGERS DOWN THROAT. NEVER GIVE ANYTHING
TO UNCONSCIOUS PERSON. GET MED AID. SKIN: REMOVE CONTAMINATED
CLOTHING & WASH BEFORE REUSE. WASH WITH SOAP & WATER. GET MED AID
IF IRRITATION PERSISTS. INHALATION: NONE KNOWN. EYES: IMMEDIATELY
FLUSH EYES W/PLENTY OF WATER FOR 15 MIN, GET MED AID IMMED AFTER
FLUSHING.

Fire Fighting

Flash Point Method:COC
Flash Point:455F,235C
Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA
Fire Fighting Procedures:NONE KNOWN. WEAR RESPIRATORY PROTECTION IF IN
A CONFINED AREA.

Accidental Release

Spill Release Procedures:WIPE, SCRAPE, SOAK UP IN AN INERT MATERIAL AND
PUT IN A CONTAINER FOR DISPOSAL. WEAR PROPER PROTECTIVE EQUIPMENT
AS SPECIFIED IN THE PROTECTIVE EQUIPMENT SECTION. WARN OTHER
WORKERS OF SPILL.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
AVOID CONTACT WITH SKIN AND EYES. WASH HANDS BEFORE EATING AND
SMOKING.

Exposure Controls

Respiratory Protection:NONE KNOWN
Ventilation:USE ONLY IN WELL VENTILATED AREA.
Protective Gloves:RUBBER GLOVES
Eye Protection:SAFETY GLASSES, MONOGOGGLES
Other Protective Equipment:RUBBER APRON, SHOWERS, EYEWASH STATIONS
Supplemental Safety and Health

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:400F,204C
Melt/Freeze Pt:M.P/F.P Text:65.0F,18.3C
Vapor Pres:NEGLIGIBLE
Vapor Density:21.8
Spec Gravity:1.035 (WATER=1)
Evaporation Rate & Reference:<1 (BU AC=1)
Solubility in Water:INSOLUBLE (20C)
Appearance and Odor:YELLOW LIQUID, MILD ODOR
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, TIN
FUMES.

Disposal

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS. INCINERATION RECOMMENDED IN
APPROVED INCINERATOR ACCORDING TO FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.