BQDYX - PLASTICS
- MSDS: BQDYX
- Manufacturer: JOSEPH T RYERSON AND SONS INC SUB INLAND STEEL
- Product Name: PLASTICS
- National Stock Number: 5330-00-248-2082
Product Identification
Product ID:PLASTICS
MSDS Date:11/08/1985
FSC:5330
NIIN:00-248-2082
MSDS Number: BQDYX
Responsible Party
CHICAGO, IL 60608
US
Emergency Phone: 312-762-2121
Info Phone: 312-762-2121
Cage: 52660
Contractor
Telephone: 312-762-2121
Cage: 52660
Ingredients
ETHYLENE THIOUREA (SARA III)
CAS: 96-45-7
RTECS: NI9625000
Fraction By Weight: 0.4%
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
ZINC COMPOUNDS
Fraction By Weight: 1.1%
PHENOLIC CELLULOSE
MELAMINE GLASS
SILICONE GLASS
EPOXY GLASS
POLYESTER GLASS
PHENOLIC GLASS
VINYLESTER GLASS
POLYESTER FR GLASS
Hazards
LD50 LC50 Mixture:NO TLV EXISTS FOR PLASTIC PRODUCTS
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:MATERIEL IS AN ARTICLE.
Explanation of Carcinogenicity:ETHYLENE THIOUREA IS LISTED BY
NTP,IARC,OSHA AS A CARCINOGEN.
Effects of Overexposure:NOT REPORTED.
Medical Cond Aggravated by Exposure:NOT REPORTED.
First Aid
First Aid:INHAL(OF COMBUSTION PRODUCTS):REMOVE TO FRESH AIR;ADMINISTER
OXYGEN;CALL PHYSICIAN.
Fire Fighting
Flash Point:NOT REPORTED
Extinguishing Media:MANUFACTURER STATES TO USE METHOD APPLICABLE TO
SURROUNDING FIRE.
Fire Fighting Procedures:USE A SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:TOXIC FUMES OF HYDROGEN
BROMIDE,FORMALEDHYDE.
Accidental Release
Spill Release Procedures:NO SPECIAL REQUIREMENTS.
Handling
Handling and Storage Precautions:MANUFACTURER STATES NO SPECIAL
REQUIREMENTS.
Other Precautions:WHEN MACHINING DRY THERMOSET PLASTICS,DUST IS
PRODUCED;USE PROPER ENGINEERING CONTROLS FOR DUST;USE A DUST
MASK;USE PROTECTIVE CREAMS OR CLOTHING TO PREVENT SKIN CONTACT;USE
SAFETY GLASSES.
Exposure Controls
Respiratory Protection:WHEN MACHINING DRY THERMOSET PLASTICS USE PROPER
RESPIRATORY PROTECTION FOR NUISSANCE DUST.
Ventilation:WHEN MACHINING DRY THERMOSET PLASTICS USE APPROPRIATE
ENGINEERING CONTROLS FOR DUST.
Protective Gloves:WHEN MACHINING THERMOSET PLASTIC
Eye Protection:WHEN MACHINGIN THERMOSET PLASTIC
Other Protective Equipment:USE PORTECTIVE CREAMS OR CLOTHING TO PROTECT
SKIN WHEN MACHINIG THERMOSET PLASTICS.
Work Hygienic Practices:WASH HANDS.USE PRUDENT SANITARY AND HYGENIC
PRACTICES.
Supplemental Safety and Health
NONE.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:WON'T MELT
Decomp Temp:Decomp Text:650F,343C
Spec Gravity:1.1-2.0
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOLID(SHEET,PLATE,BAR,TUBE);VARIOUS COLORS;ODOR NOT
REPORTED
Stability
Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:HIGH HEAT(650F AND HIGHER).
Hazardous Decomposition Products:CARBON MONOXIDE,FORMALDEHYDE,HYDROGEN
BROMIDE.
Disposal
Waste Disposal Methods:USE APPROVED METHODS OF SOLID WASTE
DISPOSAL.FOLLOW FEDERAL,STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.