Product ID:#44 RESIN CORE SOLDER
MSDS Date:12/12/1988
FSC:3439
NIIN:00-824-9856
MSDS Number: BQFBH

Emergency Phone: 312-297-1600

Info Phone: 708-297-1600

Cage: 09185

Telephone: 847-297-1600

Cage: 75297

ROSIN ACID

CAS: 8050-09-7

Fraction By Weight: 95%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SMOKE DURING SOLDERING CAN IRRITATE
EYES AND RESPIRATORY TRACT. FLUX FUMES MAY CAUSE PULMONARY
IRRITATION AND LUNG DAMAGE.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:ROSIN IS AN ALLERGIN - MAY CAUSE RASH, HEADACHE
OR THROAT IRRITATION IN A SENSITIVE PERSON.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES CONTACT: FLUSH THOROUGHLY WITH WATER AND GET MEDICAL
ATTENTION. SKIN CONTACT: WASH WITH SOAP AND WATER. INHALATION:
REMOVE TO FRESH AIR. INGESTION: NOT APPLICABLE.

Flash Point Method:COC
Flash Point:420F,216C
Extinguishing Media:ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Handling and Storage Precautions:AVOID EYE CONTACT WITH HOT FLUX. AVOID
BREATHING SMOKE DURING SOLDERING.
Other Precautions:DO NOT PLACE FLUX CORED SOLDER WIRE INTO A HOT SOLDER
POT. THE FLUX MAY IGNITE.

Respiratory Protection:USUALLY NOT REQUIRED.
Ventilation:LOCAL EXHAUST: TO REMOVE SMOKE FROM BREATHING AREA.
MECHANICAL (GENERAL): RECOMMENDED.
Protective Gloves:NONE REQUIRED.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:NONE.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING AND AFTER
HANDLING SOLDER WIRE.
Supplemental Safety and Health
NONE

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:149F,65C
Spec Gravity:1.08
Solubility in Water:INSOLUBLE
Appearance and Odor:SOLID AMBER CORE INSIDE SOLDER WIRE
Percent Volatiles by Volume:4.5

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:SMALL AMOUNTS OF TURPENTINE. MAY EMIT
HYDROGEN CHLORIDE FUMES (<0.5% OF FLUX) DURING SOLDERING.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.