Product ID:01603 URSA OIL EXTRA DUTY SAE 10W
MSDS Date:11/20/1985
FSC:9150
NIIN:00N035400
MSDS Number: BQGFZ

TEXACO INC

BEACON, NY 12508
US

Emergency Phone: 914-831-3400;800-424-9300(CHEMTREC)

Info Phone: 914-831-3400;409-722-8381

Preparer: R. T. RICHARDS

Cage: 7B131

TEXACO INC

509 BEACON, NY 12508-0509 US

Telephone: 914-831-3400

Cage: 7B131

MINERAL OIL, PETROLEUM DISTILLATES, SOLV DEWAXED HEAVY

CAS: 64742-65-0

RTECS: PY8038501

Fraction By Weight: 95-99%

ACGIH TLV: 5 MG/M3 (OIL MIST)

DAILY WITH SOAP AND WATER, AND LAUNDERING OR

RTECS: 9999999ZZ

LD50 LC50 Mixture:LD50 (ORAL,RAT) >5 G/KG.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: BELIEVED TO BE MINIMALLY
IRRIT. SKIN: BELIEVED TO BE MINIMALLY IRRIT. INHALATION: BELIEVED
TO BE MINIMALLY IRRITATING IF NOT IN EXCESS OF PERMISSIBLE CONC.
INGEST: BELIEVED TO BE PRACTICA LLY NON-TOX. CHRONIC: NEW & USED
MOTOR OILS HAVE BEEN TESTED FOR POTNTL CARCIN IN LAB MICE. ONLY
USED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:MINERAL OIL, PETROLEUM DISTILLATES,
SOLVENT DEWAXED, HEAVY PARAFFINIC: GROUP 1 (IARC).
Effects of Overexposure:HLTH HAZ: MOTOR OILS WERE SHOWN TO CAUSE SKIN
CANCER WHEN REPEATEDLY APPLIED TO MICE WITHOUT ANY EFFORT TO REMOVE
MATERIAL BETWEEN APPLICATIONS. STRICT COMPLIANCE TO OCCUPATIONAL
CONTROL PROCEDURES OU TLINED IN MSDS IS BELIEVED TO BE ADEQUATE
PROTECTION FROM SUCH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: AS WITH MOST FOREIGN MATERIALS, SHOULD EYE CONTACT
OCCUR, FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER . INGESTION: CALL MD
IMMEDIATEL Y . INHALATION: REMOVE FROM EXPOSURE. SUPPORT BREATHING
(GIVE ARTIFICIAL RESPIRATION/OXYGEN) .

Flash Point Method:COC
Flash Point:410F,210C
Extinguishing Media:ACCORDING TO NFPA GUIDE, USE WATER SPRAY, DRY
CHEMICAL, FOAM, OR CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER/FOAM MAY CAUSE FROTHING. USE WATER TO COOL FIRE-EXPOS
CNTNRS.IF LEAK/SPILL HAS NOT IGNITED, (SUPDAT)
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:CONTAIN SPILL IF POSSIBLE. WIPE UP OR ABSORB
ON SUITABLE MATERIAL AND SHOVEL UP. CALL CHEMTREC (800) 424-9300.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:MINIMUM FEASIBLE HANDLING TEMPERATURES
SHOULD BE MAINTAINED. PERIODS OF EXPOSURE TO HIGH TEMPS SHOULD BE
MINIMIZED. WATER CONTAM SHOULD BE AVOIDED.
Other Precautions:WARNING! AVOID SKIN CONT W/USED MOTOR OILS. USED
MOTOR OILS HAVE CAUSED SKIN CANCER IN LAB ANIMALS WHEN REPEATEDLY
APPLIED & LEFT IN PLACE BETWEEN APPLICS. IN CASE OF SKIN CONT,
PROMPTLY WASH THORO W/ SOAP & WATER. OIL-SOAKED CLTHG (SUPDAT)

Respiratory Protection:NONE REQUIRED IF EXPOSURES ARE WITHIN
PERMISSIBLE CONCENTRATIONS. WEAR NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NORMAL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOG/FULL LGTH FACESHLD .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:EXPOSED EMPLOYEES SHOULD EXERCISE RESONABLE
PERS CLEANLINESS; THIS INCL CLEANSING EXPOS SKIN AREAS SEVERAL
TIMES (ING 2)
Supplemental Safety and Health
FIRE FIGHT PROC: USE WATER SPRAY TO DISPERSE VAPS & TO PROVIDE PROT FOR
PERSONS ATTEMPTING TO STOP LEAK. HAZ DECOMP PRODS: TO HEAT/COMBUST.
WASTE DISP METH: PROD HAS BEEN EVALUATED FOR RCRA CHARACT & DOES
NOT MEET CRITERIA OF HAZ WASTE IF DISCARDED IN ITS PURCHASED FORM.
OTHER PREC: SHOULD BE CLEANED BEFORE REUSE.

HCC:V6
Spec Gravity:0.8762 (H*2O=1)
Appearance and Odor:BRIGHT AND CLEAR.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
ALDEHYDES & KETONES, COMBUST PRODS OF NITROGEN & SULFUR EVOLVED
WHEN SUBJECTED (SUPDAT)

Waste Disposal Methods:UNCER RCRA,IT IS RESPONSIBILITY OF USER OF PRODS
TO DETERM, AT TIME OF DISP, WHETHER PROD MEETS RCRA CRITERIA FOR
HAZ WASTE. THIS IS BECAUSE PROD USES, TRANSFORMATIONS, MIX,
PROCESSES, ETC MAY RENDER RSLTG MATL HAZ. WASTE CLASSIFICATION:
(SUPP DATA)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.