BQGZN - RUBEROID MB PLUS GRANULE SURFACED MEMBRANE TORCH APPLIED
- MSDS: BQGZN
- Manufacturer: GAF BUILDING MATERIALS CORP
- Product Name: RUBEROID MB PLUS GRANULE SURFACED MEMBRANE TORCH APPLIED
- National Stock Number: 5640-00F025914
Product Identification
Product ID:RUBEROID MB PLUS GRANULE SURFACED MEMBRANE TORCH APPLIED
MSDS Date:01/26/1990
FSC:5640
NIIN:00F025914
MSDS Number: BQGZN
Responsible Party
WAYNE, NJ 07470-3689
US
Emergency Phone: 201-628-3841
Info Phone: 201-628-4092
Preparer: R CANFIELD/R J HENNINGS
Cage: 24291
Contractor
Telephone: 201-628-4092
Cage: 24291
Ingredients
ASPHALT FUMES, ASPHALT, CUTBACK ASPHALT
CAS: 8052-42-4
RTECS: CI9900000
Fraction By Weight: 40-60%
ACGIH TLV: 5 MG/CUM
SILICA DIOXIDE, CRYSTALLINE QUARTZ, SAND (SUSPECTED HUMAN
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: 3-5%
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: 1%
OSHA PEL 20 MPPCF
ACGIH TLV: 2 MG/CUM (RESP DUST)
NON-HAZARDOUS FOR INGREDIENTS
Fraction By Weight: 34-46%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NASAL IRRITATION OF THE
MUCOUS MEMBRANES, THROAT IRRITATION. SKIN: BURNS.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:INHALATION: SHORTNESS OF BREATH ON EXERTION,
DRY COUGH, PNEUMOCONIOSIS, BURNS OR NASAL/THROAT IRRITATION.
Medical Cond Aggravated by Exposure:RESPIRATORY AILMENTS
First Aid
First Aid:EYES: FLUSH W/FLOWING WATER FOR 15 MINS. SKIN: COOL W/ICE OR
WATER. DON'T ATTEMPT TO REMOVE ASPHALT. COVER W/PETROLEUM JELLY
(VASELINE). REMOVE WHEN ASPHALT HAS SOFTENED. INHALATION: REMOVE TO
FRESH A IR. PROVIDE OXYGEN IF BREATHING IS DIFFICULT. INGESTION:
OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:COC
Flash Point:>500F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL OR WATER
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS & FULL
PROTECTIVE CLOTHING.
Accidental Release
Spill Release Procedures:PICK UP PIECES & DISPOSE PROPERLY. VACUUM
DUST. USE A DUST SUPPRESSANT IF SWEEPING IS NECESSARY.
Handling
Other Precautions:HOT ASPHALT IS USED TO INSTALL & IS HAZARDOUS IF EYE
OR SKIN CONTACT IS MADE. WHEN PRODUCT IS HEATED, SMALL AMOUNTS OF
HYDROGEN SULFIDE MAY BE GIVEN OFF. HYDROGEN SULFIDE IS A FLAMMABLE,
TOXIC GAS. AV OID BREATHING OF FUMES.
Exposure Controls
Respiratory Protection:WEAR A NIOSH/ANSI APPROVED RESPIRATOR
Ventilation:SUFFICIENT NATURAL VENTILATION
Protective Gloves:HEAT RESISTANT
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment:LONG SLEEVE SHIRT & LONG TROUSERS (BOTH
W/MINIMAL SYNTHETIC FIBER CONTENT), SOLID WORK SHOES
Work Hygienic Practices:WASH HANDS AFTER APPLICATION.
Supplemental Safety and Health
PRODUCT MAY CONTAIN INGREDIENTS 14808-60-7 OR 14807-96-6.
Chemical Properties
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK SHEET IN ROLL FORM, GRANULE, TALC, SAND OR
FILM SURFACED W/SLIGHT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:CO, CO2, ACROLEIN, ACIDS, KETONES,
ALDEHYDES, HYDROGEN SULFIDE
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.