BQJKH - HARDWAX

Product Identification

Product ID:HARDWAX
MSDS Date:08/20/1987
FSC:6850
NIIN:00F026503
MSDS Number: BQJKH

Responsible Party
NORTHWEST ANTI-CORROSION
501 NORTH 36TH ST #43
SEATTLE, WA 98103
US

Emergency Phone: 206-285-6892

Info Phone: 206-284-5400

Cage: GO194

Contractor
NORTHWEST ANTI-CORROSION
SEATTLE, WA 98103 US

Telephone: 206-284-5400

Cage: GO194

Ingredients

MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100), PARAFFIN-NAPTHANES

CAS: 64742-88-7

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM


PARAFFIN WAX *92-3*

CAS: 64742-61-6


ASPHALT OXIDE *92-3*

CAS: 64742-93-4

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE KNOWN.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION TO EYES & LUNGS. SKIN: DERMATITUS.
INHALATION: HEADACHE & DIZZINESS.
Medical Cond Aggravated by Exposure:DERMATITUS & DRY SKIN.

First Aid

First Aid:EYES/SKIN: WASH W/PLENTY OF WATER FOR AT LEAST 15 MINS.
INHALATION: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT,
ADMINISTER ARTIFICIAL RESPIRATION. INGESTION: DON'T INDUCE
VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:SCC
Flash Point:42C (108F)
Lower Limits:0.6%
Upper Limits:8.0%
Extinguishing Media:FOAM, DRY POWDER OR WATER SPRAY
Fire Fighting Procedures:DON'T USE WATER JET
Unusual Fire/Explosion Hazard:DON'T WELD, CUT OR HEAT EMPTY CONTAINERS.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. CONTAIN W/SAND
OR OIL ABSORBENT MATERIAL. PREVENT LIQUID FROM ENTERING SEWERS ETC.
CLEAN UP W/NON-SPARKING TOOLS. REMOVE TO A SAFE PLACE FOR SUBSEQUET
DISPOSAL.

Handling

Handling and Storage Precautions:DON'T STORE NEAR HEAT OR OPEN FLAME.
USE IN A WELL VENTILATED AREA. REMOVE ALL SOURCES OF IGNITION.
Other Precautions:AVOID BREATHING VAPORS. AVOID CONTACT W/SKIN/EYES &
CLOTHES.

Exposure Controls

Respiratory Protection:NIOSH APPROVED FOR ORGANIC VAPORS & MISTA.
Ventilation:ADEQUATE TO MAINTAIN TLV <100 PPM
Protective Gloves:SOLVENT RESISTANT
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment:OVERALLS
Work Hygienic Practices:USE ONLY IN WELL VENTILATED AREAS OBSERVING
GOOD HOUSEKEEPING PROCEDURES.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:140C (284F)
Vapor Pres:3.3
Vapor Density:4.83
Spec Gravity:0.87
Evaporation Rate & Reference:(BU AC = 1): 0.19
Appearance and Odor:BLACK, ODOR OF BITUMEN & HYDROCARBONS.

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:OPEN FLAME & SPARKS. ALL SOURCES OF
IGNITON.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE &
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.