Product ID:AWA VERSA SMOOTH
MSDS Date:11/22/1989
FSC:5610
NIIN:00F026667
MSDS Number: BQJTF

TAMKO ASPHALT PRODUCTS INC

601 N HIGH
JOPLIN, MO 64801-1935
US

Emergency Phone: 412-624-6644

Info Phone: 412-624-6644

Preparer: CHARLES W HARPER

Cage: 95298

TAMKO ASPHALT PRODUCTS INC

JOPLIN, MO 64801-1935 US

Telephone: 412-624-6644

Cage: 95298

ASPHALT FUMES, ASPHALT, CUTBACK ASPHALT

CAS: 8052-42-4

RTECS: CI9900000

Fraction By Weight: 40-55%

ACGIH TLV: 5 MG/CUM

1,3-BUTADIENE POLYMER, STYRENE-BUTADIENE POLYMER, SBS, SBS

CAS: 9003-55-8

RTECS: WL6478000

Fraction By Weight: 10-20%

NEPHELINE SYENITE BASED COLORED GRANULES

Fraction By Weight: 20-30%

SILICA DIOXIDE, CRYSTALLINE QUARTZ, SAND (SUSPECTED HUMAN

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: <10%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

SLAG

Fraction By Weight: <10%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NAUSEA &/OR DIZZINESS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: DERMATITIS.

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/WATER UNTIL
PARTICLES ARE REMOVED. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:COC
Flash Point:>550F
Extinguishing Media:WATER, WATER FOG, DRY CHEMICALS, FOAM, CO2

Handling and Storage Precautions:AVOID SPLATTER OR OTHER CONTACT
W/MOLTEN MATERIAL GENERATED DURING HEAT WELD APPLICATION.

Respiratory Protection:USE A NIOSH APPROVED RESPIRATOR W/ORGANIC VAPOR
CARTRIDGE.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:NORMAL PERSONAL HYGIENE
Supplemental Safety and Health
ASPHAULT FUMES MAY CONTAIN SMALL TRACES OF POLYAROMATIC HYDROCARBONS.

Boiling Pt:B.P. Text:>550F
Melt/Freeze Pt:M.P/F.P Text:>300F
Vapor Pres:NEGLIGIBLE
Spec Gravity:0.98-1.05
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BROWN TO BLACK SEMI-SOLID W/PETROLEUM ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:INHALATION OF FUMES GENERATED DURING HEAT
WELDING APPLICATION.
Hazardous Decomposition Products:CO2, CO, ALDEHYDES

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. MUNICIPAL OR INDUSTRIAL LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.