Product ID:POLYMERIC NO SKID ADD, 2398
MSDS Date:03/17/1987
FSC:6810
NIIN:00N035734
MSDS Number: BQLGV

Emergency Phone: 201-686-1300

Info Phone: 201-686-1300

Cage: 26351

Telephone: 800-589-1267/800-854-6813

Cage: 26351

PROPENE POLYMERS; (1-PROPENE, HOMOPOLYMER) (HERCOFLAT 1150)

CAS: 9003-07-0

RTECS: VD1842000

Fraction By Weight: 95-100%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:IRRITATION MAY OCCUR. SKIN:MAY
CAUSE IRRITATION. INHAL:MAY CAUSE IRRITATION. INGEST:MAY CAUSE
GASTRO-INTESTINAL IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES:FLUSH IMMEDIATELY WITH COPIOUS QUANTITIES OF WATER FOR
AT LEAST 15 MINUTES. GET MEDICAL ATTENTION IMMEDIATELY. SKIN:REMOVE
CONTAMINATED CLOTHING. WASH SKIN WITH PLENTY OF SOAP AND WATER.
LAUNDER CLOTHING BEFORE REUSE. INHAL:REMOVE TO FRESH AIR. GET
MEDICAL ATTENTION IMMEDIATELY. INGEST:CALL A PHYSICIAN IMMEDIATELY
TO DETERMINE WHETHER OR NOT TO INDUCE VOMITING.

Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . NONFLAMMABLE. SMOTHER FLAMES WITH ONE OF THE
ABOVE EXTINGUISHING MEDIA.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
PROLONGED INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID AIR-BORNE
PARTICULATES OF OVERSPRAY DURING SPRAY APPLICATION. IN RESTRICTED
VENT AREAS, USE A NIOSH/MSHA A PPRVD RESP I/A/W 29 CFR
1910.134(SUPDAT)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOLUME & PATTERN, TO KEEP TLV &
LEL OF HAZ INGRED BELOW LIM SPECIFIED, & TO REMOVE (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOGG & FULL LGTH FCSHLD.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
RESP PROT:TO REMOVE A COMBINATION OF PARTICULATES AND VAPORS.
VENT:DECOMPOSITION PRODUCTS DURING WELDING OR FLAME CUTTING OF
SURFACES COATED WITH THIS PRODUCT.

Vapor Density:HVR/AIR
Spec Gravity:0.9
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.