BQLHW - BURNISHINE COPPER, BRASS & METAL POLISH
- MSDS: BQLHW
- Manufacturer: HERBERT STANLEY CO
- Product Name: BURNISHINE COPPER, BRASS & METAL POLISH
- National Stock Number: 6850-00N035765
Product Identification
Product ID:BURNISHINE COPPER, BRASS & METAL POLISH
MSDS Date:01/05/1987
FSC:6850
NIIN:00N035765
MSDS Number: BQLHW
Responsible Party
SKOKIE, IL 60076
US
Emergency Phone: 303-629-1123; 800-332-3073
Info Phone: 312-583-1810
Cage: HERBE
Contractor
Telephone: 800-535-5053
Cage: HERBE
Ingredients
SOLVENT NAPHTHA (PETROLEUM), MEDIUM ALIPHATIC; (PETROLEUM
CAS: 64742-88-7
Fraction By Weight: 65%
OSHA PEL 500 PPM (MFR)
ACGIH TLV: 100 PPM (MFR)
AMMONIUM HYDROXIDE; (AMMONIA) (SARA III) (PEL/TLV AS
CAS: 1336-21-6
RTECS: BQ9625000
Fraction By Weight: 3%
OSHA PEL 50 PPM
ACGIH TLV: 25 PPM;35 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATING TO EYES. SLIGHTLY
IRRITATING TO SKIN. INGEST: IF VOMITING OCCURS CAN CAUSE ASPIRATION
PNEUMONITIS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:INTENSE OVEREXPOSURE TO VAPORS IN UNVENTILATED
OR CONFINED AREA MAY CAUSE RESPIRATORY IRRITATION, DIZZINESS,
NAUSEA AND HEADACHE.
Medical Cond Aggravated by Exposure:PRE-EXISTING EYE IRRITATION AND
DERMATITIS.
First Aid
First Aid:SKIN: WASH WITH SOAP AND WATER. EYE: FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. INHAL: REMOVE TO FRESH AIR. INGEST: DO NOT INDUCE
VOMITING. IN ALL CASES SEEK MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:TCC
Flash Point:105F,41C
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:MECHANICAL FOAM, DRY CHEMICAL, WATER FOG AND CARBON
DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . DO NOT USE WATER STREAM AS IT WILL SPREAD
FIRE.
Unusual Fire/Explosion Hazard:A VAPOR ACCUMULATION WOULD FLASH AND/OR
BURN IF IGNITED.
Accidental Release
Spill Release Procedures:ELIMINATE POTENTIAL SOURCES OF IGNITION. SOAK
UP MATERIAL WITH AN ABSORBENT SUCH AS CLAY OR SAND. PLACE IN
CONTAINER. FLUSH AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DOT CLASS ORM-A IDENTIFICATION #NA2672
GUIDE SHEETS 27 & 60 NFPA COMBUSTIBLE #2. DO NOT USE NEAR FLAME.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NOT NORMALLY NECESSARY. NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL/MECHANICAL (GENERAL): YES.
Protective Gloves:USE GLOVES SUCH AS BUNA-N.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NOT NORMALLY REQUIRED.
Work Hygienic Practices:KEEP AWAY FROM CLOTHING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:>313F,>156C
Vapor Pres:1.8 @ 60F
Vapor Density:5.05
Spec Gravity:0.935 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:MILKY WHITE LIQUID; ODOR MILD AMMONIACAL &
ALIPHATIC HYDROCARBON.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CARBON MONOXIDE IF BURNED WITH
INSUFFICIENT AIR.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W ALL FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.