Product ID:SPEEDCRAFT S/G LATEX ENAMEL 5-D, 5-510
MSDS Date:06/04/1990
FSC:8010
NIIN:00N036027
MSDS Number: BQLQD

PPG INDUSTRIES INC

260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555;800-441-9695

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

CLAY (KAOLIN); (ALUMINUM SILICATE)

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 2-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 15-20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 60-65%

FILM FORMERS, RESINS, & ADDITIVES

Fraction By Weight: 15-20%

EXPOS LIM, LEL BELOW STATED LIM, & TO REMOVE DECOMP

RTECS: 9999999ZZ

CORR MATL, PERSIST EYE/SKIN IRRIT/BRTHG

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: MAY BE HARMFUL IF
SWALLOWED. EYE: CAUSES IRRIT. SKIN: MAY CAUSE SLIGHT IRRIT. INHAL:
VAPS & SPRAY MIST MAY BE HARMFUL IF INHALED. CHRONIC: AVOID LONG
TERM & RPTD CONT. PROD CNTNS TITANI UM DIOXIDE. ANIMALS INHALING
MASSIVE QTY OF TITANIUM DIOXIDE DUST IN A LONG-TERM STUDY DEVELOPED
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: LUNG TUMORS. STUDIES W/HUMANS
INVOLVED IN MFR OF PIGMENT INDICATE NO INCR RISK OF CANCER FROM
EXPOS. POTNTL FOR INHAL OF TITANIUM DIOXIDE DUSTS FROM COAT IS VERY
LIM. SINCE OVEREXP ARE NOT E XPECTED, THERE IS NOT SIGNIFICANT HAZ
FOR MAN. SYMPS OF OVEREXP: HDCH/ITCH/BURN SENSATION, & VISUAL
DISTURB (SUPP DATA)

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE: FLUSH IMMED W/PLENTY OF
WATER FOR @ LST 15 MIN. SKIN: FLUSH IMMED W/PLENTY OF WATER
FOLLOWED BY WASHING W/SOAP & WATER. INHAL: REMOVE TO FRESH AIR.
APPLY ARTF RESP & OTHER SUPPORTIVE MEASURES AS REQD. OTHER: IF ANY
OF THE FOLLOWING OCCUR DURING/FOLLOW USE OF PROD, CONT A POIS CTL
CTR, EMER ROOM/PHYS IMMED. HAVE MSDS INFO AVAIL: INGEST, EXCESS
EXPOS TO (ING 6)

Flash Point Method:PMCC
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQUEOUS FILM FORM FOAM) DESIGNED TO EXTING NFPA
(SUPP DATA)
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY BE USED TO COOL CLSD
CONTRS TO PVNT PRESS BUILD-UP & (SUPP DATA)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPPED W/PROPER
RESP & SKIN/EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST, VERMICULITE/OTHER
ABSORB MATL & PLACE INTO CONTRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LG QTY
IN BLDGS DESIGNED & PROTECTED FOR STOR OF NFPA CLASS IIIB
COMBUSTIBLE LIQ. PROTECT FROM FREEZING.
Other Precautions:IF MATL IS PART OF A MULTIPLE COMPONENT COATING SYS,
READ MSDS FOR OTHER COMPONENTS BEFORE BLENDING AS THE RESULTING
MIXTURE MAY HAVE HAZ OF ALL OF ITS PARTS.

Respiratory Protection:WHERE VENT IS INADEQUATE, USE A NIOSH/MSHA
APPROVED SUITABLE RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO
KEEP CONC OF INGRED LISTED BELOW LOWEST SUGGESTED (ING 5)
Protective Gloves:CONSTRUCTED OF: NITRILE/NEOPRENE/LATEX.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR PROT CLTHG INCL IMPERMEABLE APRON.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA: CLASS IIIB COMBUST LIQ FIRES. FIRE FIGHT PROC: POSS
AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF WATER IS USED, FOG
NOZZ ARE PREF. HAZ DECOMP: CARBON MONOXIDE. EFTS OF OVEREXP:MAY
INDI CATE EXCESS EYE CONT. DRY, TEAR, CRACK,BURN, RED & SWELL ARE
CNDTNS ASSOC W/EXCESS SKIN CONT.

HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:<10
Vapor Density:HVR/AIR
Spec Gravity:1.1-1.3
Evaporation Rate & Reference:<38(BUTYL ACETATE=1)
Solubility in Water:<88%
Appearance and Odor:VISCOUS LIQ W/AN ODOR CHARACT OF THE CHEM FAMILY &
ANY SOLV LISTED IN INGRED.
Percent Volatiles by Volume:<98

Stability Indicator/Materials to Avoid:YES
AVOID CONT W/STRONG ALKALIES, STRONG MINERAL ACIDS/STRONG OXIDIZING
AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PROD WHEN HEATED.
WELD/BRAZ/FLAME-CUTTING ON SURF COATED W/PROD MAY PRDCE FUMES INCL
(SUPP DATA)

Waste Disposal Methods:WASTE MATL MUST BE DISPOSED OF I/A/W FED, ST,
PROVINCIAL, & LOC ENVIRONMENTAL CTL REGS. EMPTY CONTRS SHOULD BE
RECOVERED OR DISPOSED OF THRU AN APPRVD WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.