Product ID:EUTECTO-MASK
MSDS Date:02/01/1985
FSC:3439
NIIN:00N036310
MSDS Number: BQLYB

EUTECTIC CORP

40-40 172ND ST
FLUSHING, NY 11358-9981
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

1); (ZIRCON)

CAS: 14940-68-2

RTECS: ZH9000000

Fraction By Weight: >50%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 20-30%

SILICON DIOXIDE, AMORPHOUS; (AMORPHOUS SILICA (DIATOMACEOUS

CAS: 7631-86-9

Fraction By Weight: 1-5%

OSHA PEL 6 MG/M3 RDUST

ACGIH TLV: 10 MG/M3 TDUST

GLYCEROL; (GLYCERINE)

CAS: 56-81-5

RTECS: MA8050000

Fraction By Weight: 1-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 (MIST) 9293

MAGNESIUM OXIDE

CAS: 1309-48-4

RTECS: OM3850000

Fraction By Weight: <1%

OSHA PEL 15 MG/M3 PARTICULATE

ACGIH TLV: 10 MG/M3;TDUST; 9293

ALUMINUM OXIDE

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: <1%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MINIMAL EFFECT OF AIRBORNE PARTICLES
OR GENERATED FUMES OTHER THAN NORMAL FUMES OCCURING FROM WELDING
OPERATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL: REMOVE TO WELL VENTILATED AREA. OBTAIN MEDICAL
ATTENTION. INGEST: CALL MD IMMED . EYES: IMMED FLUSH WITH POTABLE
WATER FOR A MINIMUM OF 15 MIN, SEEK ASSISTANCE FROM MD . SKIN:
FLUSH WITH COPIOUS AMOUNTS OF WATER. CALL MD.

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .

Spill Release Procedures:NORMAL HOUSEKEEPING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:REFER TO ANSI Z49.1-1983-"SAFETY IN
WELDING & CUTTING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:IF CONFINED AREA, USE NIOSH/MSHA APPROVED
AIR-SUPPLIED TYPE.
Ventilation:LOCAL EXHAUST: REQUIRED. MECH(GEN): USE IF AVAILABLE.
Protective Gloves:WELDERS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:REFER TO AWS PUBLICATION ANSI Z49.1-1983.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Appearance and Odor:PASTE

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:NORMAL INDUSTRIAL WASTE PROCEDURE. DISPOSE OF
I/A/W FEDERAL, STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.