Product ID:"1 SHOT" (R) LETTERING ENAMEL PN 193L
MSDS Date:03/01/1989
FSC:8010
NIIN:01-042-7421
MSDS Number: BQMJH

CONSUMERS PAINT FACTORY, INC.

5300 W. 5TH AVENUE
GARY, IN 46406
US

Emergency Phone: 219-949-1684

Info Phone: 219-949-1684

Cage: 13294

CONSUMERS PAINT FACTORY INC

6398 GARY, IN 46406-1563 US

Telephone: 219-949-1684/800-424-9300(CHEMTREC)

Cage: 13294

AROMATIC HYDROCARBON

CAS: 64742-95-6

Fraction By Weight: .1-1%

OSHA PEL 100 PPM

MINERAL SPIRITS

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 35-45%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

VM & P NAPHTHA

CAS: 64742-89-8

Fraction By Weight: 1-5%

OSHA PEL 500 PPM

ACGIH TLV: 300 PPM

ALIPHATIC ACIDS

CAS: 68037-38-7

Fraction By Weight: .1-1%

ALUMINUM FLAKE

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 10-20%

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:INHAL: RESP TRACT
IRRIT-HEADACHE-NAUSEA-CNS DEPRESS-FATIGUE-UNCONSCIOUSNESS. INGEST:
SEVERE GI DISTURBANCES W/NAUSEA-VOMITING-ANOREXIA-CONSTIPATION.
CHEM PNEUMONIA W/ASPIRATION. EYE: SEVERE IRRIT-REDN
ESS-TEARING-BLURRED VISION. POSSIBLE CONJUNCTIVAL/CORNEAL INJURY.
SKIN: IRRIT-DRYING-DERMATITIS-ULCERATIONS.
Explanation of Carcinogenicity:LEAD CHROMATE IS SUSPECTED TO CAUSE LUNG
CANCER AND IS LISTED BY THE NTP
Effects of Overexposure:INHAL/INGEST: KIDNEY-LIVER-OTHER SYS
DAMAGE-HIGHER BRAIN FUNCTIONS-MENTAL CAP. LEAD POISON
W/FATIGUE-SLEEP DISTURB-CONSTIPATN. SEVERE:
COLIC-ANEMIA-NEURITIS-RED BLOOD CELL FORM-KIDNEYS-NERV SYS DAMAGE
-APPETITE LOSS-METAL
TASTE(MOUTH)-ANXIETY-NAUSEA-PALLOR-HEADACHE-IRRITABILITY-MUSCLE/JOI
NT PAIN-TREMORS-NUMB-DIZZI-HYPER

First Aid:INHAL: IF OVERCOME BY VAPORS, REMOVE TO FRESH AIR. IF NOT
BREATHING-RESTORE BREATHING. GET MED HELP OR DR IMMED. EYE: FLUSH
WITH LARGE QUANTITIES OF WATER 15 MINS. GET MED HELP OR DR IMMED.
SKIN: REMO VE EXCESS MATERIAL WITH PAPER TOWELS ORRAGS. WASH WITH
MILD SOAP AND WATER. IF ANY REDNESS OR SWELLING PERSISTS, GET MED
ATTN. INGEST: IF INGESTED-DO NOT INDUCE VOMITING. GET MED HELP OR
DR IMMED.

Flash Point Method:PMCC
Flash Point:91.0F,32.8C
Lower Limits:0.9%
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE-SHOULD USE TO
COOL CONTAINERS EXPOSED TO FIRE. DO NOT ENTER FIRE AREA WITHOUT
PROPER PROTECTIVE EQUIPMENT, INCLUDING SCBA.
Unusual Fire/Explosion Hazard:AVOID IGNIT SRCS-GROUND CNTNR W/POURING.
ELECT EQUIP/INSTALL IN ACCORD W/NATL ELECT CODE. EMP: USE
NON-FERROUS TOOLS/WEAR NON-SPARK SHOES WHERE EXPLOS HAZ EXIST

Spill Release Procedures:ELIMINATE ALL HEAT SOURCES, OPEN FLAMES AND
OTHER SOURCES OF IGNITION. ABSORB WITH SOLID ABSORBENT. SHOVEL INTO
CONTAINERS. IF LARGE QUANTITIES ARE SPILLED, PERSONAL PROTECTIVE
EQUIPMENT MAY BE REQUIR ED.

Handling and Storage Precautions:SECURE CLOSURES AND KEEP CONTAINERS
UPRIGHT TO PREVENT LEAKAGE. STORE IN COOL, WELL VENTILATED AREA
AWAY FROM HEAT, SPARKS AND OPEN FLAMES.
Other Precautions:AVOID EXCESS LIQ FREE FALL. DONT FLAME CUT-BRAZE-WELD
W/OUT NIOSH/MSHA MECH FILTER RESP/ADEQ VENT OR IF EMP EXPOSED TO
SPRAY APPLICATN/ABRASIVE BLAST CLEANING. USE ENGINEERING/ADMIN
CONTROLS TO MAINTA IN EXPOSURE LEVEL BELOW OSHA REQ LEVEL

Respiratory Protection:ORGANIC VAPOR RESPIRATOR WITH PARTICULATE FILTER
APPROVED BY NIOSH.
Ventilation:LOCAL EXHAUST PREFERRED. PAINT SPRAY BOOTH: 150 FPM FACE
VELOCITY. MECHANICAL FOR SMALL VOLUME APPLICATIONS.
Protective Gloves:BUTYL RUBBER OR EQUIVALENT
Eye Protection:SPECTACLES WITH SIDE SHIELDS
Supplemental Safety and Health
SPECIAL SHIPPING INFORMATION: PAINT MUST BE SHIPPED IN METAL CONTAINERS
AND PACKED IN STRONG OUTSIDE CARTONS WITH THE UN NUMBER, THE
DESCRIPTION OF THE MATERIAL, AND THE FLASH POINT MARKED ON THE OUTS
IDE PACKAGE.

Boiling Pt:B.P. Text:246-385F
Vapor Pres:2-15
Vapor Density:3.8-4.9
Spec Gravity:(H2O=1) .74-.89
Evaporation Rate & Reference:(ETHER=1) 9-70
Solubility in Water:INSOLUBLE
Appearance and Odor:WATER WHITE AND CHARACTERISTIC PETROLEUM ODOR
Percent Volatiles by Volume:25-35%

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXCESSIVE HEAT
Hazardous Decomposition Products:CO, NOX, LEAD, CHROMIUM

Waste Disposal Methods:DISPOSE AS PAINT WASTE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.