BQMQW - SHARPIE FINE POINT PERMANENT MARKER, BLUE
- MSDS: BQMQW
- Manufacturer: SANFORD CORP
- Product Name: SHARPIE FINE POINT PERMANENT MARKER, BLUE
- National Stock Number: 7520-00N036246
Product Identification
Product ID:SHARPIE FINE POINT PERMANENT MARKER, BLUE
MSDS Date:06/26/1990
FSC:7520
NIIN:00N036246
MSDS Number: BQMQW
Responsible Party
BELLWOOD, IL 60104
US
Emergency Phone: 800-228-5635
Info Phone: 800-228-5635
Cage: 86874
Contractor
Telephone: 1-800-323-0749
Cage: 86874
Ingredients
BUTYL ALCOHOL; (N-BUTANOL) (SARA III)
CAS: 71-36-3
RTECS: EO1400000
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
2-PENTANONE, 4-HYDROXY-4-METHYL-; (DIACETONE ALCOHOL)
CAS: 123-42-2
RTECS: SA9100000
OSHA PEL 50 PPM
ACGIH TLV: 50 PPM
DYES
PROPYL ALCOHOL; (N-PROPANOL)
CAS: 71-23-8
RTECS: UH8225000
OSHA PEL 200 PPM;250 PPM STEL
ACGIH TLV: 200 PPM;250 STEL,S
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT IS NOT CONSIDERED TOXIC
UNDER FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS, TITLE 16 PART
1500. THIS PRODUCT IS CONSIDERED SAFE WHEN USED UNDER NORMAL USE
CONDITIONS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTIFICIAL RESPIRATION) .
EYES:IMMEDIATELY FLUSH WITH POTABLE WATER FOR A MINIMUM OF 15
MINUTES, SEEK AS SISTANCE FROM MD . SKIN:FLUSH WITH COPIOUS AMOUNTS
OF WATER. CALL MD .
Fire Fighting
Flash Point Method:TOC
Flash Point:84F,28.9C
Lower Limits:2.2%
Upper Limits:14%
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:WIPE UP WITH ABSORBENT MATERIAL AND DISCARD AS
SOLID WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT SHAKE MARKER. KEEP CAP ON
MARKER WHEN NOT IN USE.
Other Precautions:THIS PRODUCT IS CONSIDERED SAFE WHEN USED UNDER
NORMAL USE CONDITIONS.
Exposure Controls
Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NONE UNDER NORMAL USE CONDITIONS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAVITY:0.8044 @ 20C (H*2O = 1).
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:207F,97C
Vapor Pres:13 @ 20C
Vapor Density:2.07 @ 20C
Spec Gravity:SUPDAT
Evaporation Rate & Reference:1.3 (BUTYL ACETATE = 1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, COLORLESS MOBILE LIQUID WITH MILD ALCOHOL
ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NOT AVAILABLE
Stability Condition to Avoid:NOT AVAILABLE
Hazardous Decomposition Products:NOT AVAILABLE
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS . DISCARD AS SOLID WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.